Page 1
NET-A
(Caster Kit - NCSTR4
CCESS
N-Type Network Cabinets
)
INSTRUCTIONS CM607A
© Panduit Corp. 2012-13
Caster Kit Installation (NCSTR4)
• Install [4] Caster Mounting Plates into posts of cabinet (insert bracket into post in an angled position from
above mounting location, rotate bracket, and align bracket with mounting holes)
• Install [2] M5 screws into bottom holes of Caster Mounting Plate through cabinet post (as shown below)
• Secure [4] Caster Assemblies to Caster Mounting Plates
NOTE: Ensure that fixed casters and swivel casters are paired together at front and rear of cabinet
Caster Mounting Plate Caster
Mounting
Plate
Swivel Caster Assembly
(at rear of cabinet)
[2] M5 Hex Head Screw
(use 7mm socket wrench)
Swivel Caster Assembly
(at rear of cabinet)
Caster
Mounting
Plate
Fixed Caster Assembly
(at front of cabinet)
[4] M8 Hex Head Screw
(use 13mm socket wrench)
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
Fixed Caster Assembly
(at front of cabinet)
Loading...