Panduit N2EOR1CA1200B1 Installation Manual

NET-ACCESS

End of Row Floor Seals
(N2EOR1BA1070, N2EOR1CA1200)

INSTRUCTIONS CM638A

© Panduit Corp. 2013

N-Type Cabinets

End of Row Floor Seal Installation With End of Row Side Panel

1. Attach Side Skirt Mounting Brackets to the back of the side to side beams of the frame (front and rear) using (4) M5 x 0.8
Button Head Torx Screws.

2. Attach Floor Skirt to Side Panel Vertical Beam and mounting brackets using (5) M5 x 0.8 Button Head Torx Screws, as
shown below.

Side Skirt Mounting
Bracket (2)

Floor Skirt

M5 X 0.8 Button
Head Screws (4)

M5 X 0.8 Button
Head Screws (5)

FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp

Page 1 of 2

INSTRUCTIONS CM638A

End of Row Floor Seal Installation With Standard Side Panel

1. Attach (2) Foam Seals to the bottom of the side panel beam, as shown below.

2. Attach (2) Side Skirt Mounting Brackets using (4) M5 x 0.8 Button Head Torx Screws.

3. Attach Floor Skirt to Side Panel Cross Beam and mounting brackets using (5) M5 x 0.8 Button Head Torx Screws.

Foam Seals

Side Panel Beam

Floor Skirt

M5 x 0.8 Button Head
Torx Screws (5)

Side Skirt Mounting
Brackets

M5 x 0.8 Button Head
Torx Screws (4)

Side Panel Beam removed for clarity

For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp

www.panduit.com

Page 2 of 2

E-mail:
[e-mail]
Phone: [phone]