Page 1
Wall Board Adapter
Part Numbers: MWBA1, MWBA-2G
© Panduit Corp. 2014
SIDE VIEW
INSTALLATION INSTRUCTIONS
Designed for Communication or Data Wiring Applications
USE ONLY WHERE LOCAL CODES PERMIT
NOT INTENDED FOR USE WITH
ELECTRONIC WIRING DEVICES
SINGLE GANG ADAPTER (MWBA)
1. Cut a 3.75" (95.3mm) x 2.00" (50.8mm) hole in the drywall.
DOUBLE GANG ADAPTER (MWBA-2G)
1. Cut a 3.81" (96.8mm) x 3.78" (96mm) hole in the drywall.
2. Partially thread the mounting tabs. Insert assembly into
hole and center.
3. Rotate the mounting tabs behind the drywall. Thread the
mounting tabs until snug.
Maximum drywall thickness - 0.75" (19.1mm). Avoid studs.
PN99D
TEMPLATE FOR
SINGLE GANG
ADAPTER
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 1 of 1
TEMPLATE FOR
DOUBLE GANG
ADAPTER
techsupport@panduit.com
866-405-6654
E-mail:
Phone:
Loading...