Page 1
p
\
THIS COPY IS PROVIDED ON A RESTRICTED BASIS AND IS NOT TO BE USED IN ANY WAY DETRIMENTAL TO THE INTERESTS OF PANDUIT CORP.
00 4-28-08 BLR BJPU RELEASED 4288
REV DATE BY CHK’D DESCRIPTION ECN -R CUST SUP
ABJ
--
UNLESS OTHERWISE SPECIFIED,
(.x) ± --- (.xxx) ± ---
(.xx) ± --- ANGLES ± ---
DRAWN BY:
DATE:
4-28-08
CHK’D:
NOTES, UNLESS OTHERWISE SPECIFIED:
PANDUIT TOOL NUMBER RT2HTN IS USED TO
INSTALL COATED & UNCOATED PAN-STEEL
MLTEH, MLTEH15 AND MLTSH TIES.
THIS TOOLS’ FEATURES INCLUDE:
• Single handle trigger for fast installation
• Cable tie side entry for immediate positioning of
tie and tool
• Adjustable controlled or Installer controlled
tension
• Cut-off capability with the cutter and cutter
handle
• Easy removal of excess tie
• Narrow nose allows access to tight areas
• Multi-position rear handle allows access to tight
areas
• Features to release & remove tie from tool
before cutting
CABLE TIE CROSS-SECTION CODE:
MLTEH MLTEH15 MLTSH
TOOL WEIGHT: 2.5 lbs. (40 oz.)
Dimensions shown in
F:\wrkgrp\rvusers\ENGR DOCS-NEW
CUSTDWG/TM25753A01_00 RT2HTN.doc
arenthesis are metric.
CORP. TINLEY PARK, ILLINOIS
RT2HTN CUSTOMER DRAWING
UNLESS OTHERWISE
SPECIFIED, ALL DIMENSIONS
ARE GIVEN IN INCHES, THIRD
ANGLE PROJECTION.
SCALE
DRAWING NO.
TM25753A01
BLR
BJPU
MATL:
SHEET
1 OF 1
NONE
DWG
A
SIZE
Loading...