Page 1
HEAT SHRINK
© Panduit Corp. 2013
1) Position heat shrink over object to be covered without stretching.
2) Using a heat gun, infrared heat source, soft yellow flame torch or
oven, evenly heat the tubing until it has fully recovered and conforms
to object. See package label for shrink temperature.
3) Do not char or burn the tubing.
INSTALLATION INSTRUCTIONS IN005
WARNING!
Follow installation instructions carefully.
Use adequate ventilation and avoid charring or
burning. Consult Material Safety Data Sheet for
further information.
Special consideration for HSTTPN,
Non-Crosslinked PVC Heat Shrink Tubing
• Non-Crosslinked heat shrink is not as shelf stable as crosslinked
heat shrink
• Partial tube recovery will occur if the tube is stored at elevated
temperatures >70°F (21°C)
• For optimum shelf life, store product at 70°F (21°C); best if used
within 12 months of manufacture
• Shelf life may be reduced to one month or less if stored at
95°F (35°C)
• Storing non-crosslinked heat shrink at elevated temperatures,
>70°F (21°C), affects the expanded diameter; other tube properties
are not affected by elevated storage temperatures
E-mail: techsupport@panduit.com
www.panduit.com
For Instructions in Local Languages and Technical Support:
http://www.panduit.com/resources/install_maintain.asp
Phone: 866-405-6654
Rev 03
Loading...