Direct Burial Compression Connectors
Rev. 02
Page 1 of 2
INSTALLATION INSTRUCTIONS T-PMPI-289-PC
©2008
PANDUIT
Corp.
For Technical Support: www.panduit.com/resources/install_maintain.asp
GCE GCC6X6 GPC
Views Using Cable Ties
Crimp (1)* Crimp (2) Crimp (3)
Crimping Views
Post Crimp Post Crimp
*One crimp IEEE Std. 837™– 2002 only available for part numbers GCE1/0-1/0 and GCE6X61/0-1/0.
LISTED
467
CERTIFIED
22.2
one crimp exceeds:
LISTED
467
CERTIFIED
22.2
optional crimp exceeds:
Meets All
837™– 2002
Requirements
Meets All
837™– 2002
Requirements
INSTALLATION INSTRUCTIONS T-PMPI-289-PC
Page 2 of 2
For Instructions in Local Languages
and Technical Support:
http://www.panduit.com/resources/install_maintain.asp
E-mail:
cs@panduit.com
Fax:
(815)485-5839
www.panduit.com
Rev. 02
Note: Factory installed anti-oxidant may discolor over time, but product performance is not diminished.
Remove all non-conductive material from mating surfaces prior to installation.
Ground Plate Assembly
Ground Plate Views
Wall install Floor install
LISTED
467
CERTIFIED
22.2
Meets All
837™– 2002
Requirements
Connector to be assembled so stud is flush or
protruding from the end of the connector prior
to crimping as shown.
Crimp Die: CD-930G-250 (PG25/Black)
Crimp Tools: CT-2931, CT-2931E, CT-930,CT-930CH,
CT-2930, CT-940CH*, CT-2940*
*Requires die adapter CD-940-DA
Loading...