Page 1
QuickNet Zero RU Bracket
B
A
1
2
3
Part Number: FQCBRUA
© Panduit Corp. 2014
INSTALLATION INSTRUCTIONS
FS005A
Compatible with the following QuickNet
Cassettes:
A. QuickNet Copper Cable Assembly part
numbers that begin with: QA, QB, QC, and
QE.
B. QuickNet SFQ Series MTP* Fiber Optic
Cassette/Cable Assembly part numbers that
begin with FQ.
Do not use with QuickNet Fiber Optic
Cassette part numbers that begin with FC
and Opticom Fiber Adapter Panels (FAPs).
These products use Opticom Zero RU
Brackets FEABRUA or FEABRU.
The QuickNet Zero RU Bracket can be mounted onto a previously
installed equipment bracket using existing screws:
(1) Remove screws from existing equipment that align with slots in
zero RU bracket.
(2) Loosen screws of existing equipment that align with slits in
zero RU bracket.
(3) Slide zero RU bracket under loosened screws.
(4) Replace removed screws and tighten loosened screws.
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
* MTP is a registered trademark of US Conec Ltd.
www.panduit.com
The QuickNet Zero RU Bracket can also be mounted directly to the
cabinet rail with the screws provided.
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Page 1 of 1
Loading...