Page 1
Easy Connection of
Indoor Network Cameras!
Connecting indoor cameras to
Ethernet network cabling is easy
using Panduit Field Term Plugs!
Easy to Attach Field Term Plug
1
Loose cable end Strip cable and
attach wire cap
2 3
Panduit Field Term Plug Options
Made for easy on-site connection of network cabling
• Simple 2-piece plug assembly
• Install reliably in 60 seconds or less
• All plugs work with Category 5e, 6 and Category 6A cables
• Can re-terminate up to 20 times
Insert wire cap into
plug housing and
snap together
Done!
Plug is ready
Plugs for Unshielded
(UTP) Cabling Installs
Straight UTP Plug (FP6X88MTG)
45º Angled UTP Plug (FPUD6X88MTG)
Plug for Shielded
Cabling Installs
Straight Shielded Plug
(FPS6X88MTG)
Accessories
Termination Tool (EGPT)
Test Cord (FP6X88TC)
Page 2
AXIS® P3245-LV Example
• Example shows cabling fed from behind mounting bracket
• Cabling fed from side of camera (direct or in conduit) is similar
1
Locate cable stub and slide grommet over. Insert cable stub through opening in camera.
13
2
4
BA
Attach Panduit Field Term Plug to cable. Insert Plug into port and place
grommet into camera unit.
5
A
C E
Route cable to avoid bends, mount camera and apply cover.
D
B
• Follow the AXIS P3245-LV Installation guide for
detailed instructions
• Follow Panduit TX6A Field Term Plug detailed
installation instructions
IMPORTANT
www.panduit.com
© 2020 Panduit Corp.
ALL RIGHTS RESERVED.
CPFL202--SA-ENG
4/2020
Loading...