Non-Metallic Surface Raceway
Pan-Way® Non-Metallic Surface Raceway provides maximum exibility for routing, protecting,
and terminating high performance cabling systems. With today’s fast-track projects and design/build
jobs, selecting the best wiring method to support extensive data communications and power cabling
is a real concern. As part of the Panduit Enterprise Solution, Pan-Way® Surface Raceway offers a safe,
convenient and attractive method for secure routing by modifying or extending existing installations. It
provides connections to existing work areas without the expense of in-wall cabling.
Panduit Surface Raceway is designed with attention to application and aesthetics to blend with any
décor. All Panduit raceway systems offer a full complement of transition and bend radius ttings that
facilitate integration between systems. It is compatible with standard NEMA screw-on faceplates or
superior Pan-Way® Snap-On Faceplates, and a full line of junction boxes.
Non-metallic Surface Raceway (Small Capacity)
Low Voltage Single Channel Raceway (LD)
• LD is a one-piece raceway available in three sizes with adhesive backing
• Routes coaxial, ber optic, and other low-voltage cables
• Full range of low voltage ttings
Power Rated Single Channel Raceway (LDPH and LDS; UL and CSA rated to 600V)
• LDPH is a tamper resistant two-piece raceway available in three sizes with pre-punched mounting
holes and adhesive backing
• LDS is a tamper resistant solid piece design raceway available in two sizes with adhesive backing
• Full range of power rated ttings
Power Rated Multi Channel Raceway (LD2P10; UL and CSA rated to 600V)
• LD2P is a dual channel raceway with a exible hinged cover and adhesive backing
• Suitable for routing data and power cables simultaneously
• Full range of power rated ttings
Non-metallic Surface Raceway (Large Capacity)
T-45 Surface Raceway (UL and CSA rated to 600V)
• T-45 is a medium sized raceway with pre-punched mounting holes; multi-directional hinged cover
allows access from both sides
• Optional divider wall available for running power and data simultaneously
T-70 Surface Raceway (UL and CSA rated to 600V)
• T-70 is a large sized raceway with pre-punched mounting holes
• Optional snap-in divider wall for running power and data simultaneously
• Compatible with NEMA standard screw-on faceplates or Panduit snap-on faceplates
For additional raceway solutions, please go to www.panduit.com.
2
Non-Metallic Surface Raceway Selection Guide
Table of Contents
LD Prole Raceway ............................................4
LD Raceway Roadmap..........................................4
LD/LDPH/LDS/LD2P10 Raceway .................................5
Standard LD Fittings for Low Voltage Applications ..................6
Standard LD Fittings for Power Rated Applications ..................7
T-45 Surface Raceway ..........................................8
T-45 Surface Raceway Roadmap .................................8
T-45 Surface Raceway Fittings ...................................9
T-70 Surface Raceway .........................................10
T-70 Surface Raceway Roadmap ................................10
T-70 Surface Raceway Fittings ..................................11
T-70 Surface Raceway Accessories ..............................11
Faceplates ..................................................12
Snap-On Faceplates...........................................12
Screw-On Faceplates..........................................13
Junction Boxes ...............................................14
Fast-Snap Junction Boxes .....................................14
Power-Rated Junction Boxes ...................................15
www.panduit.com
3
Pan-Way® LD Prole Raceway
LD/LDPH/LDS/LD2P
Tee Fitting Outside Corner
Raceway Selection Guide
Drop Ceiling
Fitting
Fitting
Inside Corner
Fitting
4
Raceway Selection Guide
Pan-Way® LD Prole Raceway
Part Number Description
LD3IW6-A LD Raceway is a single channel, one-piece hinged design ideal for low
LD5IW6-A
LD
LD10IW6-A
voltage applications.
LDS
LDPH
Part Number Description
LDS3IW10-A LDS Raceway is a single channel, solid design raceway ideal for data and pow-
LDS5IW10-A
.75"
Part Number Description
LDPH3IW6-A LDPH Raceway is a single channel, two-piece hinged design raceway ideal for
LDPH5IW6-A
LDPH10IW6-A
er rated applications and requires the use of mounting straps.
.41"
1.02"
data or power rated applications. It is UL and CSA rated up to 600V.
.55"
.86"
1.52"
Part Number Description
LD2P10IW8-A LD2PH Raceway is a tamper resistant multi-channel one-piece hinged design
raceway ideal for data and power applications. It is UL and CSA rated up
to 600V.
LD2P10
All raceway listed in IW (Off White). Other colors include: WH (White) and EI (Electric Ivory).
LD and LDPH Raceway available in 6, 8 and 10ft. lengths. LDS Raceway available in 10 foot lengths only. LD2P10 Raceway is available in 8 and 10 foot lengths.
www.panduit.com
5
Raceway Selection Guide
Standard LD Fittings for Low Voltage Applications
Coupler
CF3IW-E
CF5IW-E
CF10IW-X
End Cap
ECF3IW-E
ECF5IW-E
ECF10IW-X
Right Angle
RAF3IW-E
RAF5IW-E
RAF10IW-X
4-Way Cross
CRFC5IW-X
Inside Corner
ICF3IW-E
ICF5IW-E
ICF10IW-X
Drop Ceiling/Entrance End
DCF3IW-E
DCF5IW-E
DCF10IW-X
One Inch Bend Radius Fittings for TIA Compliance
Outside Corner
OCF3IW-E
OCF5IW-E
OCF10IW-X
Fire Box Adapter
FBA5IW-X
FBA10IW-X
Tee
TF3IW-E
TF5IW-E
TF10IW-X
Reducer
RF5X3IW-E From size 5 to 3
RF10X3IW-X From size 10 to 3
RF10X5IW-X From size 10 to 5
Inside Corner
ICF3IW-X
ICF5IW-X
ICF10IW-X
All LD Prole Raceway ttings are listed in IW (Off White). Other colors include: WH (White) and EI (Electric Ivory).
All items highlighted in bold blue comply with TIA bend radius requirements.
Outside Corner
OCFX3IW-X
OCFX5IW-X
OCFX10IW-X
Right Angle
RAFC3IW-E
RAFC5IW-E
RAFC10IW-X
Tee
TFC3IW-E
TFC5IW-E
TFC10IW-X
6
Raceway Selection Guide
Standard LD Fittings for Power Rated Applications
Coupler
CFX3IW-X
CFX5IW-X
CFX10IW-X
Tee for LD2P10
TFXD10IW-X
4-Way Cross
CRFX5IW-X
Right Angle
RAFX3IW-X
RAFX5IW-X
RAFX10IW-X
End Cap
ECFX3IW-x
ECFX5IW-x
ECFX10IW-X
Conduit Entrance End
CEFXIW-X
Inside Corner
ICFX3IW-X
ICFXIW-X
ICFXIW-X
Reducer
RFX53IW-X
RFX103IW-X
RFX105IW-X
Right Angle/
Entrance End
RAEFXIW-X
Outside Corner
OCFC3IW-X
OCFC5IW-X
OCFC10IW-X
Drop Ceiling/
Entrance End
DCEFXIW-X
Adapter for LD3 and
LD5 Size Raceway
CA3IW-X
CA5IW-X
Tee
TFX3IW-X
TFX5IW-X
TFX10IW-X
Entrance End
EEFXIW
LD Raceway
Cutting Tool
SRT
All LD Prole Raceway ttings are listed in IW (Off White). Other colors include: WH (White) and EI (Electric Ivory).
All items highlighted in bold blue comply with TIA bend radius requirements.
www.panduit.com
7
Pan-Way® T-45 Surface Raceway
T-45 Raceway Roadmap
Reducer
Fitting
Raceway Selection Guide
Offset Box
for Snap-On
Faceplates
Snap-On Hinged
Data Bracket
8
Raceway Selection Guide
Pan-Way® T-45 Surface Raceway
0.06
[1.5]
1.00
[25.4]
T-45
T-45 Raceway Fittings
Cover Coupler
T45CCIW-X
Right Angle
T45RAIW
Internal Area = 2.12 Sq. In.
Part Number Description
Base T45BIW8 T-45 Raceway is a non-metallic multi-channel, two-piece, hinged
Cover T45CIW8
Divider Wall T45DW8
T-45
T45BIW10
T45CIW10
T45DW10
Inside Corner
T45ICIW
cover design raceway ideal for routing data, voice, video, ber
optic and power cabling. It is UL and CSA rated up to 600V.
T-45 Raceway is available in 8 foot and 10 foot lengths.
Outside Corner
0.26
[6.6]
T45OCIW
Entrance End
T45EEIW
Reducer Fitting
T45RLDIW
End Cap
T45ECIW
Tee Fitting
T45TIW
Tee Fitting Insert
T45TD
T-45 Raceway Accessories
Wire Retainer
T45WR-X
Snap-On Hinged
Data Bracket
T45HDBIW
T-45 Raceway is available with adhesive backing. Add “-A” at end of part number. Example: T45BIW8-A.
T-45 Raceway and ttings are listed in IW (Off White). Other colors include: WH (White) and EI (Electric Ivory).
Transition Insert
T45TRI
Workstation Outlet Center
for Screw-On Faceplates
T45WCIW
Electrical Bracket and Box
for Rectangular Outlets
T45HEGBIW
Workstation Outlet Center
for Snap-On Faceplates
T45WC2IW
Electrical Bracket and Box
for 106 Duplex Outlets
T45HEBIW
www.panduit.com
9
Pan-Way® T-70 Surface Raceway
T-70 Raceway Roadmap
Tee Fitting
Raceway Selection Guide
Right Angle
Fitting
10
Backfeed Fitting
Raceway Selection Guide
T-70 Surface Raceway
0.06
[1.5]
1.40
[35.5]
T-70
T-70 Raceway Fittings
Base Coupler
T70BCIW-X
Cover Coupler
T70CCIW-X
Internal Area = 5.15 Sq. In.
Part Number Description
Base T70BIW8 T-70 Raceway is a non-metallic large capacity, tamper resistant
Cover T70CIW8
Divider Wall T70DW8
T-70
T70BIW10
T70CIW10
T70DW10
Outside Corner
T70OCIW
and multi-channel two-piece raceway. It is UL and CSA rated up
to 600V and is ideal for routing data, voice, video, ber optic and
power cabling. T-70 Raceway transitions to T-45 and LD prole
raceway for specic applications. T-70 Raceway is available in
8 foot and 10 foot lengths.
Inside Corner
T70ICIW
0.75
[19.0]
Right Angle
T70RAIW
End Cap
T70ECIW
Entrance End
T70EEIW
Transition
T70TRIW
T70TRCIW
Tee
T70TIW
Tee Divider
T70TD
T-70 Raceway Accessories
Device Bracket
Screw-On and Snap-On
T70DB-X
3-Sided Hanging Box
(Screw-On and Snap-On)
T70HB3-X
T-70 Raceway and ttings are listed in IW (Off White). Other colors include: WH (White) and EI (Electric Ivory).
Standard Faceplate
Bracket (Screw-On)
T70SDB-X
Hanging Box
T70HB-X
3-Sided Hanging Box
for GFCI
T70HB3GFCI-X
Wire Retainers
T70WR-X
Offset Box
(Screw-On Faceplates)
T70WCIW
Transition Fitting
Insert
T70TRI
Backfeed Fitting
T70BFIW
Offset Box
(Snap-On Faceplates)
T70WC2IW
www.panduit.com
11
Snap-On Faceplates
Low Voltage – Classic Style without Labeling
• Can be used with T-70 Raceway and Fast-Snap™ Outlet Boxes
• Available in horizontal and vertical orientation with two and four ports
Ultimate ID® Classic Style Faceplates
• Can be used with T-70 Raceway and Fast-Snap
• Supplied with clear station and port label covers
• Available in horizontal and vertical orientation with two and four ports
™
Outlet Boxes
Raceway Selection Guide
T70FV2IW T70FH2IW
Classic Faceplate Frame Faceplates
• Can be used with T-70 Raceway and Fast-Snap
• Single gang vertical or horizontal faceplates accept MIni-Com® Inserts
• Available in horizontal and vertical orientation with two and four ports
(Compatible with CHS2**-X and CHS2S**-X)
™
Outlet Boxes
Low Voltage Faceplates – Standard NEMA Style
™
• Can be used with T-70 Raceway and Fast-Snap
Outlet Boxes
• Available in 106 duplex or rectangular for
communication applications
T70PSIW T70PGSIW T70PNIW
UIT70FV2IW UIT70FH2IW
T70B1IW T70BH1IW
Power Rated Faceplates – Standard NEMA Style
• Can be used with T-70 Raceway and Fast-Snap
Outlet Boxes
• Available in 106 duplex or rectangular for
electrical/communication applications
Faceplates are listed in IW (Off White). Other colors include: WH (White) and EI (Electric Ivory).
Please visit www.panduit.com for additional faceplate styles.
12
™
T70PIW T70PGIW
Raceway Selection Guide
Screw-On Faceplates
Low Voltage – Classic Style with Labeling
• Accepts Mini-Com® Modules
• Includes label/label covers for easy port identication
Classic Faceplate Frame System (Compatible with 1/2 or 1/3 Inserts)
• Accepts inserts (CHS2**-x) which snap in and out
• Available in single gang and double gang
• CHS2IW-X and CHS2SIW-X (sloped) are compatible
with CBIW, CBIW-2G, FP2DCIW and FP2RCIW
CFPSL2IWY CFPSL6IWY
Power Rated – Duplex Style
• Screw-on single gang or
double gang accepts 106
duplex outlet for electrical
applications
• Available in stainless steel
• FP2DC** accepts Mini-Com®
Inserts for communication
applications
Power Rated – Rectangular Style
• Screw-on single gang or
double gang accepts
rectangular outlet for
electrical applications
• FP2RC** accepts Mini-Com®
inserts for communication
applications
CP106IW
CPGIW
CBIW CBIW-2G
WPS-20
CPNIW-X
FP2DCIW
FP2RCIW
CHS2IW-X
EDU20IW-X
ERU20IW-X
Faceplates are listed in IW (Off White). Other colors include: WH (White) and EI (Electric Ivory).
Please visit www.panduit.com for additional faceplate styles.
www.panduit.com
13
Junction Boxes
Fast-Snap™ Junction Boxes
• Assembles without the use of screws
• Compatible with snap-on faceplates
• Available in low voltage and power rated
Raceway Selection Guide
JB1FSIW-A
(D= 1.62")
JB1FSDIW
(D= 2.75")
Low Voltage Junction Boxes
• Compatible with standard NEMA screw-on faceplates
JBX3510IW-A
(D= 1.62")
JB1IW-A
(D =1.75")
JBP1FSIW
(D= 1.62")
JB1DIW-A
(D= 2.75")
JBP2FSIW
(D= 1.62")
-A indicates product includes adhesive backing.
Boxes are listed in IW (Off White). Other colors include: WH (White).
14
Raceway Selection Guide
Power Rated Junction Boxes
• Screw together junction boxes accept standard NEMA screw-on faceplates
• Accept standard NEMA screw-on faceplates
Single Gang Boxes
JBP1IW
(D= 1.75")
Double Gang Boxes
JBP2IW
(D= 1.62")
Accessories
JBP1DIW
(D= 2.75")
JBP2DIW
(D= 2.75")
JBP1EIW
(D= 1.00")
JBP2SIW
(D=1.62")
JBP1IIW
(D= 2.27")
Round Outlet Box
RJBX3510IW
(Diameter = 5.48")
(Depth = 1.14")
Single gang pass-through
-A indicates product includes adhesive backing.
Boxes are listed in IW (Off White). Other colors include: WH (White).
JBD1IW
Double gang pass-through
JBP1MR20IW
(D=1.20")
JBD2IW
JBP1MD20IW
(D=1.22")
PSJBXIW
(D=1.31")
JBA-X
www.panduit.com
15
Panduit Corp.
World Headquarters
Tinley Park, IL 60487
800.777.3300
www.panduit.com
© 2015 Panduit Corp. ALL RIGHTS RESERVED. SRSG02--WW-ENG 12/2015
Loading...