Page 1
Net-Verse D-Type Bottom Cover Plate
Part Number(s) : D61BCP*, D62BCP*, D81BCP*, & D82BCP*
© Panduit Corp. 2016
INSTALLATION INSTRUCTIONS
Net-Verse
V00029LE
Tool List:
• T25 Torx driver
D -Ty pe
Cabinet
Front of
Cabinet
M5x0.8 x 10mm
Pan Head Torx Screw
Qty: 8
For Technical Support: www.panduit.com/resources/install_maintain.asp
D**BCP*
Installed
Bottom Cover
Qty: 2
Page 1 of 3
Page 2
© Panduit Corp. 2016
INSTALLATION INSTRUCTIONS
Install Bottom Covers
• Install (1) Bottom Cover from top and slide towards one side of Cabinet.
• Install the second Bottom Cover and slide to the opposite side of Cabinet.
• Secure both Bottom Covers with (4) M5x0.8 x 10mm screws per Bottom Cover.
1
V00029LE
2
Front of
Cabinet
M5x0.8 x 10mm
3
Pan Head Torx Screw
Qty: 4 per Cover
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 3
Page 3
© Panduit Corp. 2016
INSTALLATION INSTRUCTIONS
Adjusting Bottom Panel Pass Thru Covers
• Loosen (2) M5x0.8 x 10mm screws and slid Pass Thru Cover to expose up to half of opening.
• Remove Pass Thru Cover and relocate to the other set of holes to expose full opening.
• Route any cables to oor thru the Bottom Panel brushes.
V00029LE
M5x0.8 x 10mm
Pan Head Torx Screw
Qty: 2 per Cover
relocated to second
set of holes
Pass Thru Cover slide open
PDU Cable routed thru the Pass
Thru Cover that is fully opened
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 3 of 3
Pass Thru Cover relocated
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Loading...