24 Port Consolidation Point Box
Part Numbers: CUFMB24BL, CUFF-KIT
PN263A
© Panduit Corp. 2002 Printed in U.S.A.
INSTALLATION INSTRUCTIONS
1.0 COMPONENT IDENTIFICATION
CUFMB24BL
PARTS:
(1) Metal Box
(1) Cover
(4) Faceplate Inserts (removable)
(4) Labels and Label Covers
(4) T
AK-TYS
™
FIBER CONVERSION KIT (Sold Separately)
PARTS:
CUFF-KIT
Notes: 1. Kit works with both CUFB48BL and CUFMB24BL.
2. Depending on the product being assembled for use with fiber, some kit components may be left over.
(2) Spools with Adhesive Backing (1) Fiber Caution Label
(2) Strain Relief Clips (1) Spiral Wrap 24” long
(1) Grounding Lug (4) Panduit Cable Ties
(1) Fiber Laser Beam Warning Label (2) Rubber Grommets
(4) Wire Saddles
FOR TECHNICAL SUPPORT CALL: 866-405-6654
Page 1 of 2
PN263A
INSTALLATION INSTRUCTIONS
2.0 Box Assembly
2.1 Set box on flat work surface. Snap the (4) Faceplate Inserts in place. Label slots should be located above
modules.
2.2 Terminate copper modules. (See PN120*). Then snap modules into Faceplate Inserts.
2.3 Use T
AK-TYS
™
to secure the cables to the raised tabs in the floor of the box.
Copper module
AK-TY
T
Faceplate
2.1 2.3
3.0 Cover Assembly
3.1 To install the cover, slide the cover tabs into slots, then twist both thumb screws to secure the cover. To
remove the cover, unscrew both thumb screws, then slide and lift cover out.
3.1
10500 West 167th Street
Orland Park, Illinois 60467
WORLDWIDE SUBSIDIARIES AND SALES OFFICES
NETWORK CONNECTIVITY GROUP
Technical Support: 866-405-6654
Fax: 708-444-6993
Page 2 of 2
E-mail: ncginfo@panduit.com
Web site: www.panduit.com/ncg
Loading...