Page 1
© Panduit Corp. 2012
INSTALLATION INSTRUCTIONS
RW294
CTCN1X5
Remove top cover from bezel.
Insert one side of bezel, edgewise, into the top cap
opening . Then pivot second side down, snapping
bezel into place on ends. Visually inspect to ensure
tabs have engaged below opening.
Insert one side of cover, lengthwise, into bezel. Then pivot
second side down, snapping cover into place inside bezel.
Using the finger pull, apply moderate forces in any
direction to ensure the part is secured into the
cabinet top cap.
1
2
1
2
3
4
1
2
Cabinet Top Covers & Cable Protection
Part numbers: CTCN1X5 and CTCN3X5
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
© Panduit Corp. 2012
INSTALLATION INSTRUCTIONS
RW294
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
1
CTCN3X5
1
Remove top cover from bezel
Insert one side of bezel, edgewise, into the top cap
opening. Then pivot second side down, snapping
bezel into place on ends. Visually inspect to ensure
tabs have engaged below opening.
Insert one side of cover, lengthwise, into bezel. Then
pivot second side down, snapping cover into place
Using the finger pull, apply moderate forces in any
direction to ensure the part is secured into the cabinet
top cap.
1 2 2
3
1
2
4
Page 2 of 2
Loading...