Page 1
Mini-Com 48-Port High Density
Note: Rear mounted faceplates are not intended for removal.
CP48HDBL CPA48HDBL
Module Installation
1. 2.
3. 4.
IMPORTANT: Module must
be oriented properly.
Module Removal (screwdriver required)
Straight-in
mounting style
Straight pull removal
of module
Grounding
strip
1
2
Release
tab
Grounding Options
Trilobular
Grounding
screws
#12-24 or M6
Serrations
Cut threads
Use 1 to 2 included #12-24 or M6 trilobular
grounding screws to properly ground the
panel to the rack.
Trilobular grounding screw(s) can be installed
in place of a mounting screw or in the slot in
between on either side of the panel.
slot
Shielded Modular Patch Panels
Part Numbers: CP48HDBL, CPA48HDBL
© Panduit Corp. 2013
Contents:
1 - Panel
4 - #12-24 mounting screws
4 - M6 mounting screws
2 - Trilobular #12-24 grounding screws
2 - Trilobular M6 grounding screws
INSTALLATION INSTRUCTIONS
PN561
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 1 of 1
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Loading...