Panduit CNCSTR Installation Manual

Cable Management Cabinet Caster Kit

Part Numbers: CNCSTR

INSTRUCTIONS CM326

© Panduit Corp. 2006

Caster Kit (CNCSTR)

With the leveling legs in the down position hook the caster bracket to the mounting hook on the cabinet post in the locations shown. Fasten
with (2) 5/16 X 3/4” Bolts provided as shown. Raise the leveling legs to allow the cabinets weights to be supported by the casters.

Note: Casters can suppo rt a full y lo aded cabinet. However, the caste r s sh oul d on ly be us ed to mov e the cab ine t from one loc ati on to another.
To ensure maximum stability, the leveling legs should be used to support the cabinet when it is in it’s permanent location.

Mounting Hook

For Instructions in Local Languages

www.panduit.com/resources/install_maintain.asp

and Technical Support:

Torque bolts to 13 ft.-lbs(17.6N-m)

www.panduit.com

Page 1 of 1

E-mail:

[e-mail]

Fax:

[phone]