Page 1
OPEN-ACCESS™ COMPONENTS
For Mounting to EIA Standard 19” Communication
Rack or Network Cabinet
© Panduit Corp. 2020
INSTALLATION INSTRUCTIONS
Typical panel mounting procedure to EIA Standard 19” Communication
Rack or Network Cabinet
FOUR (4) #12-24 x 1/2”
SCREWS INCLUDED
IN EACH KIT
CM108C
D-ring removal procedure
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
© Panduit Corp. 2020
INSTALLATION INSTRUCTIONS
Horizontal Cable Management Panels
PART
NUMBER DESCRIPTION
CMPH1
CMPH2
CMPHF1 Manages patch cables. Includes 1.5”x5” D-ring on the front.
CMPHF2 Manages patch cables. Includes 3”x3” D-ring on the front.
CMPHHF1 Manages high density patch cables. Includes 1.5”x5” on front.
CMPHH2 Manages hight density patch cables. Includes 3” x 5” D-ring front.
CMDRH1 Horizontal D-ring. 1.5”x3” (3.81cm x 7.62cm)
CMDRHD1 Horizontal D-ring. 1.5”x5” (3.81cm x 7.62cm)
CMPH1C One rack unit 19” replacement cover
CMPH2C Two rack unit 19” replacement cover
Manages patch cables and distribution cables. Includes 1.5”x3” D-ring on the front and
1.5”x5” D-ring on the back.
Manages patch cables and distribution cables. Includes 3”x3” D-ring on the front and 3”x5”
D-ring on the back.
CM108C
Vertical Cable Management
CMVDR1 1” Wide vertical cable management bracket, long
CMVDR1S 2” Wide vertical cable management bracket, short
CMVDR2S 2” Wide vertical cable management bracket, short
CMVDRC Center mounted D-ring
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 2 of 2
E-mail:
techsupport@panduit.com
Fax:
(866 405-6654
Loading...