Panduit CMDBWH-X, CMDBIW-X Installation Manual

Mini-Com Module Base for

D-Subminiature Connectors

Part Number: CMDB**-X

© Panduit Corp. 2011

Connector

INSTALLATION INSTRUCTIONS

All parts purchased separately

Empty Duplex Module accepts 9-pin or High Density 15-pin male or female connectors

SOLDER OR CRIMP STYLE ONLY!

STEP ONE

Cable

Empty Duplex Module

Slide the Empty Duplex Module over
cable.

STEP TWO

Terminate cable to connector.

PN241D

Hex Screws

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

Cable Tie

www.panduit.com

STEP THREE

Attach connector to Empty Duplex
Module with hex screws.

STEP FOUR

Secure cable to Empty Duplex Module
with cable tie.

Available Pan-Ty part numbers:
PLT1M-C
PLT1.5M-C
PLT2M-C

E-mail:

[e-mail]

Fax:

[phone]

Page 1 of 1