Panduit CMBBSWH Installation Manual

Page 1
AV IN WALL BOX INSTALLATION INSTRUCTIONS
14.00”
14.00”
14.00”
7.25”
Part Number(s): CMBBLWH, CMBBSWH
© Panduit Corp. 2018
CMBBLWH
INSTALLATION INSTRUCTIONS
CMBBSWH
AV IN WALL BOX, SMALL
PN621
Parts Included:
(1) - 1” X 5” CABLE BEZEL (2) - RELEASABLE PUSH MOUNT CABLE TIE
Tools Needed:
Tape Measure Stud finder (“edge to edge” stud finder recommended) Drywall saw Steel cutting tool (for Knock-Out removal) Mounting hardware (not included)
Wall cut-out Dimensions
CMBBLWH
Back View
CMBBSWH
Back View
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 3
Page 2
© Panduit Corp. 2018
INSTALLATION INSTRUCTIONS
PN621
Mounting hardware (not included)
Wall Studs spaced
16” on center
Caution: Check for existing utilities or
other obstructions in desired placement location prior to cutting hole.
Wall Box placement instructions:
Locate desired placement location of the In Wall Box. Using a stud finder, locate wall studs. Cut hole between the wall studs using drywall saw to the above dimensions for your corresponding In Wall Box. Insert In Wall Box and secure with appropriate mounting hard­ware (not included).
Cable Bezel
Cable Bezel installation instructions:
Place Cable Bezel over cut-out. Using downward pressure to snap into place.
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 3
Page 3
© Panduit Corp. 2018
INSTALLATION INSTRUCTIONS
“D” Ring Installation (CMBBCMR sold separately):
Insert push pins into the desired hole location and engage the push pins to secure to the In Wall Box.
“D” Ring
PN621
Media Box Installation
(Using Bracket Kit CMBBRKT sold separately):
Apply foam tape (supplied with bracket kit) to the back of the Media Box. Insert the Bracket push pins into the desired loca­tion and engage the push pins to secure to the In Wall Box. Slide Media Box into tak-tape and tighten tak-tape around Media Box.
Knock-Out removal for power:
Use cutting tool to cut the tabs around desired knock-out you want to remove. (ex. 3/4” or 1” conduit or power outlet.)
Knock-Out
Foam Tape
Media Box
CMBBRKT
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 3 of 3
E-mail:
cs@panduit.com
Fax:
(708) 444-6993
Loading...