Panduit CMAA1WH-X Installation Manual

Australian Furniture Adapter

Part Number: CMAA1**-X

© Panduit Corp. 2010

Module Installation

1. Orient module and Adapter as shown
above.

INSTALLATION INSTRUCTIONS

CMAA1**-X

2. Align groove on module with notch on
Adapter. Swing module downward.

PN260A

3. Snap into place.

Module Removal

1. Press down on tab while pushing upward on the module.

The Adapter can fit into a 25mm
or 1.00" square knock out in any
metal or plastic panel that is

1.5mm - 2mm (.06" - .08") thick.

The knock out could be located
in a furniture panel, raceway, or
desk as long as it meets the
previous criteria.

2. Remove module from Adapter.

** Denotes color.

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

www.panduit.com

Page 1 of 1

E-mail:

[e-mail]

Fax:

[phone]