Panduit CMAA1 Installation Instructions Manual

Australian Fur niture Ad apter

PART NUMBER: CMAA1**-X

PN260

© Panduit Corp. 2001 Printed in U.S.A.

INSTALLATION INSTRUCTIONS

CMAA1

Module Installation

1. Orient module and Adapter as shown
above.

2. Align groove on module with notch on
Adapter. Swing module downward.

3. Snap into place.

Module R emoval

1. Press down on tab while pushi ng upward on the module.

The Adapter can fit into a 25mm
or 1.00" square knock out in any
metal or plastic panel that is

1.5mm - 2mm (.06" - .08") thick.
The knock out could be located

in a furniture panel, raceway, or
desk as long as it meets the
previous criteria.

WORLDWIDE SUBSIDIARIES AND SALES OFFICES

2. Remove module from Adapter.

10500 West 167th Street
Orland Park, Illinois 60467

NETWORK CONNECTIVITY GROUP

Technical Support: 866-405-6654

Fax: [phone]

Page 1 of 1

Web site: www. panduit.co m /n cg

E-mail: [e-mail]