Page 1
TX6 PLUS and TX5e UTP Jack Modules
CJT688TG** CJT5E88TG**
Jack
Strain
Relief
Clip
28-30 AWG
Wire Cap
For use with
Electric Ivory White
28 AWG solid/stranded
For use with
22-26 AWG cable
and 30 AWG solid cable
4
2
5
Wire caps shown as gray
for illustration purposes.
28-30 AWG wire caps are
green or yellow in color.
6
7
Do not pre-arrange
conductors.
(OR)
8
EGJT
1
2.00"
(50.8mm)
2
CWST
If present
3
For use with 28-30 AWG Cable
Part Numbers: CJT688TG**, CJT5E88TG**
© Panduit Corp. 2012
INSTALLATION INSTRUCTIONS
PN555A
* Denotes Instruction Sheet revision letter. ** Denotes color.
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
© Panduit Corp. 2012
10
1
2
11
12
EGJT
9
T568B Wiring
(OR)
1.
1. 2.
R
F
R
F
T568A Wiring
9
(OR)
1.
1.
R
F
R
F
2.
2.
Use proper bend radius control
INSTALLATION INSTRUCTIONS
PN555A
Notes:
1. For specified performance, follow TIA/EIA 568-C installation guidelines.
2. Jack Modules can terminate 28 AWG solid or stranded and 30 AWG solid only IWC data cable with 0.025" (.635mm) maximum insulated conductor outside diameter.
3. Jack Modules may be re-terminated a minimum of 20 times.
4. For technical and performance information, consult Panduit Technical Support.
As with all Wiring Accessories, the following statements apply:
1. Never install communications wiring during a lightning storm.
2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.
4. Use caution when installing or modifying communication wiring.
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 2 of 2
REMOVAL STEPS
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Loading...