Panduit CJS6X88TG**Y, CJSQ6X88TGBL, CJS688TG**Y, CJSH688TG**Y, CJS5E88TG**Y Installation Instructions Manual
...
Strain relief clip
Jack
Wire cap
Blue - Cat. 6A
White - Cat. 6
Red - Cat. 5e
2.00"
(50.8mm)
Drain
Wire
CWST
S/FTP
Individual foil
pair screen
Conductors
Braid
U/FTP
Individual foil
pair screen
Conductors
Drain wire
F/UTP
Overall foil
screen
Conductors
Drain wire
SF/UTP
Overall foil
screen
Conductors
Braid
2.00"
(50.8mm)
0.50"
(12.7mm)
CWST
Mini-Com Shielded Jack Modules -
TG Style Termination
Part Numbers: CJS6X88TG**Y, CJSK6X88TG**, CJSQ6X88TGBL, CJSH6X88TG**Y, CJS688TG**Y,
CJSK688TG**, CJSQ688TG**, CJSH688TG**Y, CJS5E88TG**Y, CJSK5E88TG**, CJSH5E88TG**Y
© Panduit Corp. 2015
INSTALLATION INSTRUCTIONS
CABLE PREPARATION STEPS
PN366M
2.00"
(50.8mm)
2.00"
(50.8mm)
** = color.
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 3
CWST
0.50"
(12.7mm)
Drain Wire
CWST
0.50"
(12.7mm)
© Panduit Corp. 2015
6
EGJT
5
Do not pre-arrange
conductors.
(OR)
4
2
3
2
0.5"
(12.7mm)
1
Trim pair separator and/or ripcord, if present.
7
T568B Wiring
(OR)
1.
1. 2.
R
F
R
F
T568A Wiring
7
(OR)
1.
1.
R
F
R
F
2.
2.
INSTALLATION INSTRUCTIONS
TERMINATION STEPS
PN366M
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 3
© Panduit Corp. 2015
1
2
3
11
EGJT
12
13
Grounding Kit,
(See note 5)
CJSGK-X
8
Trim conductors
flush
9
Trim drain wire,
if present
10
INSTALLATION INSTRUCTIONS
PN366M
REMOVAL STEPS
Notes:
1. For specified performance, follow TIA/EIA 568-C installation guidelines.
2. Shielded jack modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062" (1.57mm) maximum insulated conductor outside diameter.
3. Shielded jack modules may be re-terminated a minimum of 20 times.
4. For technical and performance information, contact Panduit Technical Support.
5. CJSGK-X Grounding Kit is REQUIRED for all Mini-Com Modular Patch Panels, but is optional for Mini-Com All Metal Shielded Modular Patch Panels.
As with all Communication Components, the following statements apply:
1. Never install communications wiring during a lightning storm.
2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.
4. Use caution when installing or modifying communication wiring.
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
techsupport@panduit.com
www.panduit.com
E-mail:
Phone:
866-405-6654
Page 3 of 3
Loading...