Page 1
TX6 PLUS and TX5e UTP Jack Modules
Jack
Wire cap
Strain relief
collar
Cat 5e = red
Cat 6 = white
4
2
5
6
7
Do not pre-arrange
conductors.
(OR)
8
EGJT
1
2
CWST
Trim pair separator and/or
ripcord if present.
3
Part Numbers: CJ688TG**, CJK688TG**, CJE688TG**, CJQ688TG**,
CJH688TG**, CJ5E88TG**, CJK5E88TG**, CJE5E88TG**, CJH5E88TG**
© Panduit Corp. 2016
INSTALLATION INSTRUCTIONS
PN403N
** Denotes color. Note: For bulk packaged TG style jack modules, add -24 to end of part number.
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 2
Page 2
© Panduit Corp. 2016
10
1
2
3
11
12
EGJT
9
T568B Wiring
(OR)
1.
1. 2.
R
F
R
F
T568A Wiring
9
(OR)
1.
1.
R
F
R
F
2.
2.
INSTALLATION INSTRUCTIONS
PN403N
Notes:
1. For specified performance, follow TIA/EIA 568-C installation guidelines.
2. Jack modules can terminate 22-26 AWG solid or stranded IWC data cable with 0.062" (1.57mm) maximum insulated conductor outside diameter.
3. Jack modules may be re-terminated a minimum of 20 times.
4. For technical and performance information, consult Panduit technical support.
As with all Communication Components, the following statements apply:
1. Never install communications wiring during a lightning storm.
2. Never install communications wiring in wet locations unless the jack is specifically designed for use in wet locations.
3. Never touch uninsulated communications wiring or terminals unless the communication line has been disconnected at the network interface.
4. Use caution when installing or modifying communication wiring.
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
REMOVAL STEPS
www.panduit.com
Page 2 of 2
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
Loading...