Panduit CFPTR4WH, CFPTR4IW Installation Manual

Mini-Com Tamper Resistant Faceplate

#6 - 32 x 1"

screws (2 included)

#6 - 32 x 1.25"

screws (2 included)

hexagon button head

CFPTR4**

combination head

#6 - 32 x 1.25"

screws (2 included)

combination head

Insert compatible plugs into modules. Align
cables 1 per notch on the faceplate as
shown above.

After cables have been aligned, close cover
and secure with #6-32 x 1.25" hexagon but­ton head screws or #6-32 x 1.25” combina­tion head screws. For hexagon button head
screws use a 5/64" hex key tool.

After modules have been installed, align
#6-32 x 1" combination head screws with
holes as shown above to mount faceplate.

4.

5.

6.

1.

2.

Installation

3.

Rotate downward. Snap into place. Repeat for all openings.

Align notch on module with tab on faceplate.

Part Number: CFPTR4**

© Panduit Corp. 2011

INSTALLATION INSTRUCTIONS

PN283C

For Instructions in Local Languages

and Technical Support:

www.panduit.com/resources/install_maintain.asp

www.panduit.com

Page 1 of 1

Page 1 of 1

E-mail:

[e-mail]

Fax:

[phone]