Page 1
Panduct PanelMax One-Piece Corner Wiring Duct
For use with Panduit Panduct Types
F, G, FS and D Wiring Duct
Part Numbers: CWD2**6, CWD3**6, CWD4**6, C2**6, CDCLP2, CDCLP3,
CDCLP4, CDLB3, CDLB4
© Panduit Corp. 2012
CDCLP2, CDCLP3,
CDCLP4
(sold separately)
INSTALLATION INSTRUCTIONS
Option 1 - Panduct Corner Wiring Duct Mounting Clip
Note: Clips provide a permanent installation and are not intended to allow for product removal
1
Refer to chart on page 4 for
mounting hole locations
- or -
Note: #10-32 x 1/2" (or sheet metal
screw equivalent) to be supplied by
the installer/end user
CWD2**6
CWD3**6
-or-
CWD4**6
32
Mounting clips must
be installed level
RW207
3a
Mounting
Clip
** Denotes color.
4
Wiring Duct
C2**6
(sold separately)
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 1 of 4
Page 2
© Panduit Corp. 2012
INSTALLATION INSTRUCTIONS
Option 2 - Panduct Nylon Rivets or Standard Fasteners
1
Refer to chart on page 4 for
mounting hole locations
RW207
(sold separately)
2
NR1-C
- or -
Note: #10-32 x 1/2" (or sheet metal
screw equivalent) to be supplied by
the installer/end user
3
CWD2**6
CWD3**6
-or-
CWD4**6
NR1-C
(Install on both
sides of duct)
TNR
(sold separately)
4
C2**6
(sold separately)
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 2 of 4
Page 3
© Panduit Corp. 2012
INSTALLATION INSTRUCTIONS
Option 3 - Panduct Corner Wiring Duct L-Bracket Mounting
Note: For use in vertical applications only when no side panel is present.
RW207
CDLB3, CDLB4
(sold separately)
1
“C”
“D”
6" max
10" max
- or -
Note: #10-32 x 1/2" (or sheet metal
screw equivalent) to be supplied by
the installer/end user
Corner
Duct
L-Bracket
CDLB3
CDLB4
Dimensions may vary due to the depth of the side
panel or due to the size of the panel opening.
“C”
minimum
clearance to
side wall
2.03" (51.6)
2.96" (75.2)
“D”
minimum
distance to
edge of
back panel
0.68" (17.4)
0.68" (17.4)
2
CWD3**6
-or-
CWD4**6
only
Back Panel
3
L-Bracket Ribs
4 5
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 3 of 4
Page 4
© Panduit Corp. 2012
D4H6, SD4H6
(sold separately)
INSTALLATION INSTRUCTIONS
Optional Feature - Panduct Solid/Slotted Divider Wall
CWD2**6
CWD3**6
-or-
CWD4**6
- or -
RW207
Mounting Hole Locations for CDCLP or Standard Fasteners (Options 1 and 2)
”
X
“
“
X
”
Corner
Duct
CWD2**6 1.60" 2.95"
CWD3**6
CWD4**6
Mounting holes
must be level
“X” Dimension
CDCLP
(1 ")
(1 ")
1.91"
(2 ")
2.84"
Screws, Fasteners,
or NR1-C
19
32
29
32
27
32
3.88"
4.93"
2
0
15
16
(2 ")
7
8
(3 ")
15
16
(4 ")
6
"
m
a
x
"
m
a
x
For Instructions in Local Languages
and Technical Support:
www.panduit.com/resources/install_maintain.asp
www.panduit.com
Page 4 of 4
E-mail:
techsupport@panduit.com
Phone:
866-405-6654
RW207_05
Loading...