Panduit C1.5LG6 Selection Guide

Organize Connect Protect

• •

Comprehensive Wiring Duct Solutions

PVC Flush Cover Wiring Duct

Type G, Wide Slots,

Wide Fingers

Type D,

Round Holes

Type F, Narrow Slots,

Narrow Fingers

Type FS, Solid Wall

Halogen-Free Wiring Duct

Type MC, Narrow Slots,

Narrow Fingers, Metric

Type C Covers for

Type F, G, D, FS, and

MC Wiring Duct

PVC Hinged Cover Wiring Duct

Type H, Hinged Cover,

Wide Slots

Type HS, Hinged Cover,

Solid Wall

Type HN, Hinged

Cover, Narrow Slots

Type HC Covers

for Type HN, H, and

HS Wiring Duct

Low-Smoke,
Halogen-Free Wiring Duct

Type NE,

Halogen-Free,

Wide Slots

Type NNC,

Halogen-Free,

Wide Slots, Metric

Type NC Covers
for Type NE and

NNC Wiring Duct

Type TNC, Low Smoke,

Halogen-Free,

Wide Slots, Metric

PanelMax™ Space Optimization and Noise Mitigation Products

Type DRD,

DIN Rail Wiring Duct*

These wiring duct types are sold base and cover separately: G, F, D, FS, HN, H, HS, NE, CWD, and Shielded.
These wiring duct types are sold base and cover together: DRD, NNC, TNC, and MC.
*DIN Rail not included.

Type CWD,

Corner Wiring Duct

(use 2" Type C Cover)

Shielded Wiring Duct EMI Noise Shield

Type TNC Covers for

Type TNC Wiring Duct

2

Wiring Duct Available Colors and Sizes

Duct Size W x H

.5 x .5 12 x 12 G F FS FL G F FS NE

.5 x 1 G F FS G F NE
.5 x 2 G G

.75 x .75 G F FS G F

.75 x 1 G G

.75 x 1.5 G F G F

.75 x 2 G G G

1 x 1 25 x 25 G F FS NNC FL G F FS NE NNC G F FS G F MC

1 x 1.5 25 x 37 G F FS NNC TNC G F NE NNC G F G F MC

1 x 2 25 x 50 G F FS D NNC G F NE NNC MC G F D G F MC

1 x 2.5 25 x 62 MC MC

1 x 3 25 x 75 G F FS D NNC TNC G F D NE NNC MC G F D G F MC
1 x 4 25 x 100 G F FS D G F D NE G F D G F

1.5 x 1 G F FS G F FS

1.5 x 1.5 37 x 37 G F FS NNC TNC G F FS NE NNC MC G F FS G F MC

1.5 x 2 37 x 50 G F FS D H HN HS NNC G F NE H HN HS NNC MC G F D H HS G F MC

1.5 x 2.5 37 x 62 MC MC

1.5 x 3 37 x 75 G F FS D H HN HS NNC TNC G F D NE H HN HS NNC MC G F D H HS G F MC

1.5 x 4 G F D G F D NE G F D G F
2 x 1 G F FS G F FS NE G F

2 x 1.5 G F FS G F FS

2 x 2 50 x 50 G F FS D H HN HS NNC FL TNC G F FS D NE H HN HS NNC MC G F FS D H HS G F MC
2 x 3 50 x 75 G F FS D H HN HS NNC G F FS D NE H HN HS NNC MC G F D H HS G F MC
2 x 4 50 x 100 G F FS D H HN HS NNC G F D NE H HN HS NNC MC G F D H HS G F MC
2 x 5 G F G F G

2.5 x 2.5 62 x 62 MC MC

2.5 x 3 G F D G F G

3 x 1 G F FS G F FS NE
3 x 2 75 x 50 G F FS D G F FS NE MC G F FS G MC

3 x 2.5 75 x 62 MC MC

3 x 3 75 x 75 G F FS D H HN HS NNC
3 x 4 75 x 100 G F FS D H HN HS G F FS D NE H HN HS MC G F D H HS G F MC
3 x 5 G F FS G F FS NE G F G

4 x 1.5 G FS G

4 x 2 100 x 50 G F FS D NNC TNC G F FS NE NNC MC G F D G MC
4 x 3 100 x 75 G F FS D NNC TNC G F FS NE NNC MC G F G F MC
4 x 4 100 x 100 G F FS D H HN HS NNC G F FS D NE H HN HS NNC MC G F FS D H HS G F MC
4 x 5 G F FS G F NE G F G
6 x 4 G F FS G F FS

3.35 x 2.54* 85.0 x 64.4 CWD CWD

4.40 x 3.57* 111.8 x 90.7 CWD CWD

5.33 x 4.58* 135.3 x 115.7 CWD CWD

6.25 x 2.12** 156.7 x 54.0 DRD DRD

7.25 x 3.12** 184.1 x 79.4 DRD DRD

8.25 x 4.12** 209.5 x 104.8 DRD DRD

*Corner Duct Prole
**DIN Rail Duct Prole

LG

Light Gray

WH

White

TNC G F FS D NE H HN HS NNC MC G F FS D H HS G F MC

BL

Black

IB
Intrs.
Blue

IG

Intl.

+

GrayIn. mm

+

Intrinsic Blue Color –

Intrinsic Blue wiring duct is made from the same lead-free PVC material as our standard PVC duct. Intrinsic Blue is an Internationally
recognized standard blue color that identies the wiring duct as “incapable of releasing sufcient electrical or thermal energy under normal or
abnormal conditions, to cause ignition of a specic hazardous atmospheric mixture in its most easily ignited concentrations."

+

ISA-RD12.6 (Instrument Society of America)

3

Panduct® Type D, G, F and FS Wiring Duct – Wire Fill Capacity

8

Nominal Duct

Size

(W x H)

In.

0.50 x 0.50 0.250 3 5 8 7 6 11 9 8 15 11 10 20 14 12 19 1 2 3 10

0.50 x 1.00 0.500 6 10 16 14 12 23 18 16 31 23 20 40 28 25 39 2 4 7 20

0.50 x 2.00 1.000 12 21 33 28 24 46 37 32 62 46 41 80 57 50 79 5 9 15 40

0.75 x 0.75 0.563 6 11 19 16 13 26 20 18 34 26 23 45 32 28 44 2 5 8 23

0.75 x 1.00 0.750 9 15 25 21 18 34 27 24 46 34 30 60 42 38 59 3 6 11 30

0.75 x 1.50 1.125 13 23 38 32 27 52 41 36 69 52 46 91 64 57 88 5 10 17 46

0.75 x 2.00 1.500 18 31 50 43 37 69 55 48 93 69 61 121 85 76 118 7 13 23 61

1.00 x 1.00 1.000 12 21 33 28 24 46 37 32 62 46 41 80 57 50 79 5 9 15 40

1.00 x 1.50 1.500 18 31 50 43 37 69 55 48 93 69 61 121 85 76 118 7 13 23 61

1.00 x 2.00 2.000 24 42 67 57 49 92 74 64 124 92 82 161 114 101 158 10 18 31 81

1.00 x 3.00 3.000 36 63 101 86 74 139 111 96 186 139 123 242 171 152 237 15 27 47 122

1.00 x 4.00 4.000 48 84 135 114 98 185 148 129 248 185 164 323 228 203 316 20 36 63 163

1.50 x 1.00 1.500 18 31 50 43 37 69 55 48 93 69 61 121 85 76 118 7 13 23 61

1.50 x 1.50 2.250 27 47 76 64 55 104 83 72 139 104 92 182 128 114 177 11 20 35 92

1.50 x 2.00 3.000 36 63 101 86 74 139 111 96 186 139 123 242 171 152 237 15 27 47 122

1.50 x 3.00 4.500 55 95 152 129 111 208 167 145 279 208

1.50 x 4.00 6.000 73 127 202 172 148 278 222 193 372 278 246 485 342 305 474 31 54 94 245

2.00 x 1.00 2.000 24 42 67 57 49 92 74 64 124 92 82 161 114 101 158 10 18 31 81

2.00 x 1.50 3.000 36 63 101 86 74 139 111 96 186 139 123 242 171 152 237 15 27 47 122

2.00 x 2.00 4.000 48 84 135 114 98 185 148 129 248 185 164 323 228 203 316 20 36 63 163

2.00 x 3.00 6.000 73 127 202 172 148 278 222 193 372 278 246 485 342 305 474 31 54 94 245

2.00 x 4.00 8.000 97 169 270 229 197 371 297 258 496 371 328 647 457 406 632 41 73 126 327

2.00 x 5.00 10.000 122 212 338 287 247 463 371 323 620 463 410 809 571 508 790 52 91 158 409

2.50 x 3.00 7.500 91 159 253 215 185 347 278 242 465 347 307 607 428 381 593 39 68 118 307

3.00 x 1.00 3.000 36 63 101 86 74 139 111 96 186 139 123 242 171 152 237 15 27 47 122

3.00 x 2.00 6.000 73 127 202 172 148 278 222 193 372 278 246 485 342 305 474 31 54 94 245

3.00 x 3.00 9.000 110 191 304 258 222 417 334 290 558 417 369 728 514 457 711 47 82 142 368

3.00 x 4.00 12.000 146 254 405 344 296 556 445 387 744 556 492 971 685 610 949 62 109 189 491

3.00 x 5.00 15.000 183 318 507 431 370 695 557 484 930 695 615 1214 857 762 1186 78 137 237 614

4.00 x 1.50 6.000 73 127 202 172 148 278 222 193 372 278 246 485 342 305 474 31 54 94 245

4.00 x 2.00 8.000 97 169 270 229 197 371 297 258 496 371 328 647 457 406 632 41 73 126 327

4.00 x 3.00 12.000 146 254 405 344 296 556 445 387 744 556 492 971 685 610 949 62 109 189 491

4.00 x 4.00 16.000 195 339 540 459 395 742 594 516 992 742 656 1295 914 813 1265 83 146 253 655

4.00 x 5.00 20.000 244 424 676 574 494 927 743 646 1240 927 820 1619 1142 1017 1581 104 182 316 819

6.00 x 4.00 24.000 293 509 811 689 593 1113 891 775 1488 1113 984

Nominal

AWG10AWG

0.216 0.164 0.13 0.141 0.152 0.111 0.124 0.133 0.096 0.111 0.118 0.084 0.100 0.106 0.085 0.330 0.25 0.190 0.118

Area

THHN THHN THHN MTW MTW THHN MTW MTW TFFN MTW MTW TFFN MTW MTW MTW

In.²

12

AWG

Electrical Communication

14

AWG

16

AWG

184 364 257 228 355 23 41 71 184

18

AWG

1943 1371 1220 1898 125 219 379 983

22

AWG23AWG

23/24

AWG24AWG

Cat.6ACat.6Cat.5e3.0

Fiber

Cable

mm

General Formula

Panduit Wiring Duct wire lls are calculated using the following general formula:

Why use a 50% Wire Fill?

As specied in NFPA79-2012 section 13.5.2, Percentage Fills of
Raceways (Ducts), a 50% wire ll is given as the maximum wire ll capacity in
all Panduit Wiring Ducts. This helps ensure general safe wiring practices are
followed. In actual practice, a 50% wire ll is the maximum amount of wiring
the duct can hold given the additional airspace created between cables by
non-uniform cable shapes, cable interlacing, and cable packing factors.

Wire Area

The wire area formula is converted
to allow calculation using the
cable diameter:

Formula Derivation

Inserting the elements from above into the
general formula results in the following:

Calculation of Internal Area

Air Space Allotment

What is the Usable Duct Area?

The usable area we dene as the calculation of
internal area that can be occupied by wires or
cables. Accounting for thickness of material, 90%
of the nominal area (WxH) is used in the formula.

Simplifying this formula results in the
formula used for wire ll calculation:

0

Note: When calculating wire ll capacity using the above formula, variables W, H, and D must be expressed in same units (i.e. mm or inches).

4

Part Numbering System for Panduct® Wiring Duct

G 2 2

Type

G = Wide Slot
F = Narrow Slot
FL = Flexible Duct
FS = Solid Wall
H = Hinged Cover Wide Slot
HN = Hinged Cover, Narrow Slot
HS = Hinged Cover, Solid Wall
D = Round Hole
NNC = Halogen-Free, Metric
NE = Halogen-Free
MC = Narrow Slot, Metric
TNC = Low Smoke, Halogen-Free

Nominal Width

In. or mm LG = Light Gray

X

Nominal Height

In. or mm

Color

WH = White
BL = Black
IB = Intrinsic Blue
IG = International Gray

—

Length

6 ft. or 2m

Part Numbering System for Panduct® PanelMax™ DIN Rail Wiring Duct

DRD 22 LG

Type

DRD = DIN Rail Duct Capability Height

Size

22 = 2" Height
33 = 3" Height
44 = 4" Height

Color

LG = Light Gray
WH = White

6

Length

6 ft.

6LG

-A

Options

-A = Adhesive backed
NM = No mounting holes
= Leave blank for
no options

Part Numbering System for Panduct® PanelMax™ Corner Wiring Duct

CWD 2 LG

Type

CWD = Corner Wiring Duct Capability Height

Size

2 = 2" Height
3 = 3" Height
4 = 4" Height

Color

LG = Light Gray
WH = White

6

Length

6 ft.

Part Numbering System for Panduct® Wiring Duct Covers

C 2 LG

Type

C = Cover
HC = Hinged Cover
NC = Halogen-Free
TNC = Low Smoke, Halogen-Free
DRDC = DIN Rail Duct

Width

In. or mm LG = Light Gray

Color

WH = White
BL = Black
IB = Intrinsic Blue
IG = International Gray

6

Length

6 ft. or 2m

Panduct® PanelMax™
Shielded Wiring Duct

Shielded wiring duct is a Type G style duct with bridges
wrapped with an aluminum foil shield. Sold in 6 ft. lengths,
available in three (3) sizes and uses Type C covers and
uses standard cover part number C2LG6.

Panduct® PanelMax™ Noise Shield

Noise shield is zinc-plated steel and black powder coated
except at bonding locations. Each kit contains two (2) 3 ft.
sections and four (4) bonding clips.*

Part Number Size (W x H)

G2X2LG6EMI 2" x 2"
G2X3LG6EMI 2" x 3"
G2X4LG6EMI 2" x 4"

Part Number Size (H)

SD2EMI 2"
SD3EMI 3"
SD4EMI 4"

*Additional bonding clips available – SDCLIP (2 per package).

5

Wiring Duct Material Properties

Rigid Polyvinyl Chloride (PVC)

A general purpose lead-free material for indoor applications. It has a UL 94 ame class of V-0 with a UL recognized continuous-use
temperature up to 50°C (122°F). Used in the manufacture of the following types of Panduit wiring duct and covers: G, F, D, FS, MC, H,
HN, HS, CWD, DRD.

Halogen-Free, Polyphenylene Oxide (PPO)

A special purpose material for use in halogen-free or high-temperature applications. It has a UL 94 ame class of V-0 with a UL
recognized continuous-use temperature up to 95°C (203°F) and is 20% lighter than PVC. Used in the manufacture of the following types
of Panduit wiring duct and covers: NE and NNC.

Low-Smoke, Halogen-Free, Polyphenylene Ether + High Impact Polystyrene (PPE + HIPS)

A special purpose material for use in low-smoke, halogen-free, and high-temperature applications. It has a UL 94 ame class of V-0
with a UL recognized continuous-use temperature up to 105°C (221°F). Meets the regulatory requirements of the mass transit industry
and other applications where re and public safety are critical; such as in trains, buses, offshore oil and gas platforms, and other similar
environments. Used in the manufacture of Type TNC wiring duct and covers.

Polypropylene (PP)

A exible material with a UL 94 ame class of V-2 with a UL recognized continuous-use temperature up to 65°C (149°F). Used in the
manufacture of Type FL exible wiring duct.

Recommended Precaution when using Type NE, NS, NNC, and TNC Wiring Duct

Cleaning solvents and cutting uids that contain any of the following chemical agents should not come into contact with these types of
wiring duct or covers. These chemicals are the most commonly known to cause stress cracking.

• Hydrocarbons

• Phenols

• Ketones

• Amines

• Ethers

• Organic, inorganic, and oxidizing acids

• Petrol

Refer to www.panduit.com for more information on chemical resistance.

Unmatched Expertise

Panduit continually invests in resources to solve your greatest business and technology challenges. Our network of sales, technical
support, distribution, and manufacturing teams are readily accessible to help you with your project needs.

6

Complete Your Installation with Accessories and Installation Tools

Wire Duct Cutting Tools

Bench Mount Duct Cutting Tool

PBDCT –

Hand-Held Duct Cutting Tool

DNT-100 –

Duct Notching Tool

Divider Walls

DCT –

DFCT –

Duct Finger Cutting Tool

Wire Duct Installation Tools

Nylon RIvet Installation Tool

TNR –

Nylon Rivets:

NR1-C – 100 pcs.

NR1-M – 1000 pcs.

Accessories

Type FL –

Flexible Wiring Duct; available

in lengths of 500mm and in

three sizes: 12mm x 12mm,

25mm x 25mm, 50mm x 50mm

Adhesive Tape –

Available in roll form or

factory applied on select sizes

Corner Strips

PVC Divider Walls:

Light Gray

D2H6 – 2"(H)
D3H6 – 3"
D4H6 – 4"

DB-C –

Divider Wall Base for
mounting all types of

divider walls; halogen-free

White

D2HWH6 – 2"
D3HWH6 – 3"
D4HWH6 – 4"

Wire Retainers

For Type FS and D Wiring Duct:

WRS-A-C10 – for 1" – 2" duct width

PVC Slotted Divider Walls:

Light Gray

SD2H6 – 2"(H)
SD3H6 – 3"
SD4H6 – 4"

Halogen-Free Divider Walls:

NNC50DWH2 – 50mm (H)

NNC75DWH2 – 75mm

Low Smoke, Halogen-Free:

TNC50D2 – 50mm
TNC75D2 – 75mm

White

SD2HWH6 – 2"
SD3HWH6 – 3"
SD4HWH6 – 4"

For Type F and HN Wiring Duct:

FWR-C – for 1.5" – 4" duct width

For Type MC Wiring Duct:

FMWR-C – for 1.5" – 4" duct width

CSC1LG6 –

6 ft. length strip with

bend radius control

CS1LG6 –

6 ft. length strip

Snap-Clip Mounting Brackets

For Wiring Duct Types

G, F, FS, and D:

S1F-C – 1" duct width

S1.5F-C – 1.5" duct width

S2F-C – 2" duct width
S3F-C – 3" duct width
S4F-C – 4" duct width

For Wiring Duct Type NE:

SNS.5-C – 0.5' duct width

SNS.75-C – 0.75' duct width

SNS1-C – 1" duct width

SNS1.5-C – 1.5" duct width

SNS2-C – 2" duct width
SNS3-C – 3" duct width

For Type G and H Wiring

WR2-C – for 2" duct width
WR3-C – for 3" duct width
WR4-C – for 4" duct width
WR5-C – for 5" duct width

WR2H-C – for 2" hinged duct

7

Panduit Wiring Duct Approvals and Compliances

Agency

Mark Agency Requirement Classification/Performance

Material Flame Class V-0
Continuous-use temperature up to 50°C (122°F)

Material Flame Class V-0
Continuous-use temperature up to 50°C (122°F)

An insulating barrier material shall comply with the minimum material
properties indicated in Table 15.1

Qualifies as a metal barrier with required thickness as indicated in
Table 6.1

Material Flame Class V-0
Continuous-use temperature up to 50°C (122°F)

• CDS (cable ducting system for impact 2 J)

• Minimum storage, transport, installation, and application
temperature: -5°C (23°F)

• Maximum application temperature: 60°C (140°F)

• Non-flame propagating

• Without electrical continuity

• Cover removable without a tool

Underwriters

Laboratories, Inc.

File No. E147128

Underwriters

Laboratories, Inc.

Canadian

Standards

Association

File No. 016446

European Union

UL 1565

UL 1565
CSA C22.2
No. 18.5-13

UL 508

section 15

UL 508

sections 34

and 181

CSA C22.2
No. 18.5-13

Low Voltage

Directive

2006/95/EC

EN 50085-1

EN 50085-2-3

Wiring Duct

Types/Products

All wiring duct

types and covers

Type H, HS, HN,

and DRD

PVC divider walls

SD*EMI metal

barrier

All wiring duct

types and covers

(except H, HS,

and HN)

H, HS, G, F, D,
MC, FS, NNC,

NE, DRD,

and TNC

European Union EN 45545-2

DIN German

Institute for

Standardization

AFNOR French

Association of
Normalization

UNIFER Italian

Railway Standards

FRA – Federal

Railroad

Administration

NFPA – National

Fire Protection

Association

National Fire

Protection Agency

DIN 43659

DIN 5510-2

DIN 54837

NF F 16-101
NF F 16-102

EN ISO 11925-2

49 CFR Part 238

NFPA130

NFPA 79-2015,

Section 13.3.1

IEC 60332-1

NFPA 79-2015,

Section 13.5.2

NFPA 79-2015,

section 13.1.6.9

Type NNC and Type NE: Exterior (R23) - HL1
Type TNC: Interior (R22) - HL2 & Exterior (R23) - HL2

• Specifies dimensions for slotted trunkings used in electrical
switch-gear assemblies and that conform to DIN VDE 060 Part 506

• Channel mounting hole pattern, slot dimensions, pitch, and location

• Distance from first to last like-size mounting hole

• Minimum overall product length

Burning Class: S4
Smoke Class: SR2
Dripping Class: ST2

Type NNC Wiring Duct Classification = F3/I4
Type TNC Wiring Duct Classification = F1/I4 NNC and TNC

Pass 30-second flame application

Surface Flammability: < 35
Smoke Density D
Ds (4.0) < 200

Non-metallic duct shall be permitted (inside enclosures) only when they
are made with a flame-retardant material; flame-retardant material is
defined in the standard by the IEC 60332-1 test method

Panduit publishes a maximum percentage wire fill for common wire
types equal to 50% of the interior cross-sectional area of the wiring duct

Panduit bend radius control accessories can be mounted at right angles
and T junctions created using wiring duct in order to maintain cable
bend radius control

(1.5) < 100

s

NNC and TNC

MC, NNC,

and TNC

TNC

TNC

TNC

All wiring duct

types and covers

(except FL)

All wiring duct

types and covers

Corner strip with

1" bend radius

control

European Union

European

Directive

2011/65/EU

Meets the requirements on the Restriction of Hazardous Substances
and is free of the six substances listed in the directive

For more information

Visit us at www.panduit.com

Contact Customer Service by email: [e-mail]

or by phone: [phone]

All wiring duct

products

©2016 Panduit Corp.

ALL RIGHTS RESERVED.

WDSG03--SA-ENG

Replaces WDSG02--SA-ENG

3/2016