Panduit ACC01 Installation Manual

Customer Service: [e-mail] 800.777.3300 Technical Support: [e-mail] 866.405.6654 page 1

IM023 Rev 00

INSTALLATION GUIDE

ACC01: Dry Contact Cable

Quick Disconnect

Standard Ethernet
Cable (2 meter)

Dry Contact Cable Kit (ACC01)

The Dry Contact Cable Kit is designed to provide an input to the G5 iPDU that interfaces with devices that p rovide state
change outputs such as motion detectors, power monitoring equipment, etc. The iPDU can be configured to send a
notification when this sensor detects a change in state.

This allows monitoring of vital data center and IT equipment with minimal effort. Installation of the Dry Contact
Cable and ongoing equipment maintenance is further facilitated by using a quick disconnect coupler and standard
ethernet cable (sold separately) that allows for the
an easy

Note: The Dry Contact Cable is designed to
result in

disconnect method for removing rack enclosure doors.

damage.

convenient positioning of devices, movement of equipment, and

connect to a G5 iPDU o nly. Connecting it to another device may

INVENTORY

OPTIONAL ACCESSORIES

Coupler

Panduit PN: CC5E88BL Panduit PN: UTP28CH2MBL

INSTALLATION INSTRUCTIONS

1.

Attach the open wires on the Dry Contact Cable to the device to be monitored.

2.

Plug the Dry Contact Cable into an open Sensor port on the iPDU or Sensor Hub.

3.

Using the Web UI set up specific conditions to monitor and send an alarm.

4.

The Dry Contact Cable is now installed and ready for use.