Panavise 979-06, 979-09 Specsheet

1. Select a Base & Head

Choose one of our five unique bases and three unique
heads for mounting to a variety of components.

MDT Head, 90° tilt w/mounting holes Model 305MDT
MDT Head/Base, 90° tilt Model 336MDT

> Model 305MDT: Head/Base with three mounting holes on

4.3125” (109.5mm) bolt circle and knob adjustment
> Model 336MDT: Head with knob adjustment
> Fully adjustable: 90° Tilt, 360° Turn & 360° Rotation under the terminal
> Accepts any 5/8” (15.9mm) diameter shaft

Heavy Duty Base Model 400MDT

> Recommended for heavy terminals and electronics
> 90° Tilt, 360° Turn & 360° Rotation
> Square base measures 4.094” x 4.094” (104mm x 104mm)
> Pre-drilled with four 0.219” (5.6mm) holes
> Accepts any 1” (25.4mm) diameter shaft

Standard Base, 90° tilt Model 328
Standard Base, 45-45° tilt Model 329

> Model 328: 90° Tilt, 360° Turn & 360° Rotation
> Model 329: 45-45° Tilt over center with 360° Turn & 360° Rotation
> Base footprint has four 0.219” (5.6mm) on a 4.23” (107.5mm) circle
> Accepts any 5/8” (15.9mm) diameter shaft

2. Select a Shaft

Choose one of our two shaft styles and lengths.

Premier MDT Shaft, 6” (152.4mm) rise Model 909-06
Premier MDT Shaft, 9” (228.6mm) rise Model 909-09

> Model 909-06: Creates 6” rise height
> Model 909-09: Creates 9” rise height
> 1” (25.4mm) diameter at base end, 5/8” (15.9mm) diameter at head end

Solo MDT Shaft, 6” (152.4mm) rise Model 979-06
Solo MDT Shaft, 9” (152.4mm) rise Model 979-09

> Model 979-06: Creates 6” rise height
> Model 979-09: Creates 9” rise height
> 5/8” (15.9mm) diameter at both ends

Note: shaft descriptions indicate the final mount’s overall rise height (when used with the head and foot assemblies), and not to the length of the shaft.

www.panavise.com

57+1.800.759.7535