Panavise 337, 385 Specsheet

Vise Heads Continued...

Circuit Board Holder Model 315

PanaVise Circuit Board Holders help you work quicker & smarter!

Model 315 Features:

> The two moveable arms extend 6” (154mm) from the cross bar and have

“V” shaped grooves which securely hold the board edges

> One arm is spring tensioned to equalize holding pressure, and includes a lever which

locks the internal spring “open” for quick board insertion and removal

> “V” notches positioned laterally near the arms’ tips securely and conveniently hold

small electronic parts

> Shaft is 4.125” (104.8mm) long and 5/8” (15.9mm) in diameter; compatible with all

300 series Bases; accessories available (page 17)

> Height (bottom of shaft to tip of arms): 10.875” (276.2mm), Weight: 1.0 lb. (0.5kg)

Fixturing Head Model 337

Exceptional choice for woodworkers and pattern makers!

Model 337 Features:

> Work can be attached easily to this universal Fixturing Head
> Six slots are 0.4375” (11.1mm) wide and 1.1875” (30.2mm) long; six 0.25” (6.3mm)

bolt holes are evenly spaced on a 4.375” (111.1mm) bolt circle
> Flat surface: 5.375” (136.5mm) in diameter
> Shaft is 4.125” (104.8mm) long and 5/8” (15.9mm) in diameter; compatible with all

300 series Bases
> Height (shaft to top of head): 3.75” (95.2mm), Weight: 11.5oz. (1.3kg)

Micrometer Holder Model 385

Holds a micrometer or small item exactly where YOU want it!

Model 385 Features:

> Gently, yet firmly, holds micrometers of all sizes. Can also hold small PC boards

and other objects
> Delrin® pads open 0.5” (12.7mm) and close to 0” for holding thin items
> Throat depth: 0.95” (24.1mm)
> Height (shaft to top of jaws): 3.14” (79.8mm), Weight: 0.23 lbs. (0.1kg)

12

Micrometer Stand Combination Model 391

The 385 Micrometer Holder & 305 Low-Profile Base are available as a pre-selected Micrometer Stand Combination, Model 391.