Panavise 380-RK Specsheet

23

> Innovative Holding Solutions

Our Wire Manager and Solder Station are specifically designed for the electronics professional and serious hobbyist. Our goal is to make

your work space more efficient — now you can take control of your wire leads and keep your soldering equipment close at hand.

Wire Manager Model 358

A handy time saver that keeps your leads and tools organized!

Model 358 Features:

> Tempered steel spring, zinc plated
> Pivots away from the jaws when not in use
> Slides onto 366 Wide Opening Head and 376 Extra-Wide Opening Head (page 11)
> Spring width: 3.375” (85.7mm). Height: 1.13” (28.7mm)

™

Solder Station Model 371

Keep your soldering iron and solder close at hand!

Model 371 Features:

> Combines a soldering iron holder, controlled-feed solder/wire holder

(for standard-sized spools), and two nib sponges with self-purging slits

> Attaches easily to the 312 Parts Tray Base Mount (page 15) or to the

308 Weighted Base Mount (page 14). Mounting screws/nuts are included

> May also be used as a freestanding unit and is easily attached to a bench or wall

Vacuum Base Repair Kit Model 380-RK

Repair your torn or damaged Vacuum Base pad!

Model 380-RK Features:

> To determine if your Vacuum Base needs replacing, clean the pad with a clean towel

and make sure that is free of debris. Then attach it to a clean, non-porous surface

(such as a window). If it still loses suction, the pad needs to be replaced.
> Includes rubber pad, handle and lock washer
> For 380 Vacuum Base (page 13) or 381 Vacuum Base PanaVise (page 7)