Vise Accessories
Thanks to ongoing customer input, we’ve added important accessories to our product line and have made replacement parts
available. If you have an idea or suggestion for an accessory or replacement part not shown here, please contact a PanaVise
representative.
Interchangeable Jaws Models 343, 344, 352-354
Interchangeable Jaws for the 303 Standard and
304 Low-Profile Heads create the perfect Vise for the job!
Nylon Jaws Model 343
> Type 6/6 Nylon Jaws offer excellent electrical insulation and gentle holding power
> Continuous heat tolerance to 200˚F (93˚C), intermittent heat to 300˚F (149˚C)
Model 343 Model 344
Model 352 Model 353
Grooved Nylon Jaws Model 344
> Same heat properties as 343 Nylon Jaws but with thin horizontal grooves,
perfect for holding small tubes, rods, or small circuit boards firmly in place
Teflon® High Heat Jaws Model 352
> Recommended for high heat applications; won’t scratch or mar delicate pieces
> Continuous heat tolerance to 500˚F (260˚C)
Plated Steel Jaws Model 353
> Designed for firmly holding heavier objects in a high heat environment
Model 354
Neoprene Jaw Pads
Neoprene Pads are soft but have plenty of holding power!
Model
204
Models 204 & 346
Model
346
Brass Jaws Model 354
> Non-marring alternative for heavy or high heat applications
Neoprene Jaw Pads Model 204
For Models 201, 209 & 203 PV Jr. Head
> Firmly hold your projects while protecting finished surfaces
Neoprene Jaw Pads Model 346
For Models 366 & 376 Heads
> Thick, molded pads have a corrugated surface on one side to firmly
hold the most delicate objects
> Reverse the pads and use the wide “V” groove to hold round objects
> Jaw Pads are 1.875” (47.63mm) wide x 1.5” (38.1mm) tall
22