Panavise 343, 344 Specsheet

BACK

All our vises and work holding devices come with a "lifetime warranty."

Neoprene Pads (pair) - Model 204

● The neoprene jaw pads slip over the ends

of the model

.

Head

● Soft, gentle with plenty of holding power

201 PVJr. or 203 PV Jr.

Extra Circuit Board Arms (pair) - Model 316

● Add extra arms for multi circuit board work

to any PanaVise Circuit Board Holder.

●

● Hold circuit boards from 1/8" (3.2mm) to

12" (304.8mm) wide and 5/32" (4mm)
thick.

● "V" notches postioned laterally near the

arm tips securely and conveniently hold
small electronic parts.

Extra Width Circuit Board Cross Bars - Model
318-14 to Model 318-30

● Add a longer Circuit Board Cross Bars to

PanaVise Curcuit Board Holder to

any
hold wider circuit boards or for multi circuit

board work.

● These longer bars are availble in

4" (101.6mm) increments from
14" (355.6mm) to 30" (762mm).

Circuit Board Holder Replacement Knob Set ­Model 319

● Replacement Knob set for all Circuit

Board Holder Arms.

Nylon Jaws (pair) - Model 343

● The 343 Nylon jaws offer excellent

electrical insulation and gentle holding
power.

● Made of type 66 nylon.

● Will withstand intermittent heat to 300°F

(149°C), or a continuous 200°F (93°C).

● Included standard on the 303 Standard

.

Head

Grooved Nylon Jaws (pair) - Model 344

● The 344 Grooved Nylon jaws are similar

to the 343 Nylon Jaws except that they
have a small horizontal groove running the
width of the jaws.

● Perfect for holding small tubes, rods, and

small circuit boards firmly in place.

Neoprene Jaw Pads (pair) - Model 346

● The reversible 346 Neoprene Jaw Pads

are used with the 366 Wide Opening Head
and the

● These thick, molded pads have a

376 Self-Centering Head.

corrugated surface on one side to firmly
hold the most delicate items.

● Flip the pads around and use the wide "V"

to hold round objects.

Telfon Jaws (pair) - Model 352

● The model 352 Teflon® High Heat jaws

won't scratch or mar delicate pieces.

● Specifically designed for high heat

environments up to 500°F (260°C).

Plated Steel Jaws (pair) - Model 353

● The model 353 Plated Steel jaws are

recommended when working with high
heat or heavy objects.

● Included standard on the 304 Low-Profile

.

Head

Brass Jaws (pair) - Model 354

● The model 354 Brass jaws are non-

marring alternative to the 353 Steel Jaws
for heavy or high heat applications.

● Prefect for Jewelry making.