Installation Manual
This module is to be installed only by the professionals and used only with a Car Audio produced by Matsushita Electric Industrial Co., Ltd. When this PCB assy with Bluetooth for car audio is installed in the Car Audio, we shall consider the following points;
1.Since “YEP0PT9918A0”owns its FCC ID Number, we shall affix an exterior label on the outside of the product if the FCC ID is not visible. The exterior label shall use wording such as either ”Contains Transmitter Module FCC ID: ACJ932CQ-EX0770” or “Contains FCC ID: ACJ932CQ-EX0770”.
2.“YEP0PT9918A0” complies with requirements of sub-sections 15.19(a)(3) in FCC Rules Part 15 Subpart C. The manual statement (15.19 (a)(3) is included User Guide of the product.
3.“YEP0PT9918A0” is to be installed only by the professional line operator as shown in following pictures. (Fig 1 and 2)
Fig 1. Rear side of “YEP0PT9918A0”
Bluetooth
Module
Fig 2. Front side of “YEP0PT9918A0”
Bluetooth
Antenna
Fig 3. Top view of “YEP0PT9918A0” be equipped for a Car Audio (example)
Module
Fig 4. Enlarged view of “YEP0PT9918A0” be equipped for a Car Audio (example)