How it Works
Panasonic
Loading...
ZEQUO 6600RE
Specifications
13 pgs90.16 Kb0

Panasonic ZEQUO 6600RE Specifications

Model Name
Model No.
1. Summary
ZEQUO 6600RE is a Layer 3 Switching Hub with management function having 10BASE-T/100BASE-TX/1000BASE-T ports, SFP extension slots, and SFP+ extension slots.
2. Feature
（1） Has wire-speed Layer 3 switching function.
（2） Ports 1 to 24 are 10BASE-T/100BASE-TX/1000BASE-T ports corresponding to autonegotiation.
（3） Ports 21 to 24 are SFP extension slots.
（4） Ports 25 to 28 are SFP+ extension slots. They are capable of 10Gbps communications. They can be used as SFP or SFP+ ports.
（5） Ports 27 and 28 are stacking ports.
（6） Settings and firmware can be changed and saved by using an SD card.
ZEQUO 6600RE
401-36241E-SG-SP03
Product Specification
PN36241E-SG
Also their speed and communication mode can be switched by configuration.
These ports and the 1000BASE-T twisted pair cable ports cannot be used simultaneously.
Up to four units can be stacked by connecting the ports using optical fiber cable or 40G direct attach cables.
Page 1 of 13
（7）Equipped with two power ports, power redundancy is feasible. Normally operates even with just the AC power supplied to either
one of the power ports.
（8） All twisted pair ports support straight/cross cable by auto sensing function.
Simply connect devices with straight cables, whether it is a terminal or a network device.
（9） Equipped with energy efficient Ethernet （EEE） conforming to IEEE802.3az （LPI）. When there is no data transmission at link up,
the energy-saving state automatically starts so that power consumption can be reduced on each port.
（10）Power saving mode detects the connection status automatically and saves power consumption to minimum.
（11）Due to the loop detection/shutoff function, a port where loop has occurred can be automatically shut off to prevent loop failures.
（12）The ports which the loop has generated are displayed via the LED, and the network administrator can specify the ports which
the loop has generated after the loop is resolved via the loop history functions.
（13） The Ring Redundant Protocol (RRP) is supported, allowing to make a redundant network via ring topology.
（14） Supports ZEQUO assist Plus. Processes from introduction to maintenance can be performed easily.
Date issued
Date revised
Sep.1,2018
Oct.1,2020
Model Name
Model No.
ZEQUO 6600RE
PN36241E-SG
3. Rated/Environmental Conditions
3－1. Power supply
3－2. Power consumption
3－3. Operating environment Temperature: 0 – 45℃
3－4. Storage environment Temperature: -20 - 70℃
3－5. EMC compliance CISPR 32 Class A
3－6. Safety compliance IEC 60950-1
3－7. Environment compliance
401-36241E-SG-SP03
Product Specification
Page 2 of 13
AC100-240V, 50/60Hz, 2.5A (with a built-in power supply)
When either power port 1, or power port 2 is connected
Normally, Max. 45.86 W, Min. 30.23 W
When both power port 1 and power port 2 are connected
Normally, Max. 50.37 W, Min. 34.35 W
*Power redundancy is feasible
Humidity: 20 - 80%RH （no condensation）
Humidity: 10 - 90%RH （no condensation）
EN 55022 Class A AS/NZS CISPR32 Class A VCCI Class A EN 61000-3-2, EN 61000-3-3 CISPR 24 EN 55024 IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
EN 60950-1 RoHS compliant
4. Form
4－1. Form and materials/colors
4－2. Mass（Weight） 5,000g（When either power port 1, or power port 2 is connected）
Dimensions ：44mm（Height）×440mm（Width）×312mm（Depth）
（Excluding protruding sections） Case material ：Main unit: SECC, Front face: PC/ABS, Face plate: PC Color ：Main unit: Green 03, Front face: Silver 01,
Face plate label: Black 01
5,600g（When both power port 1 and power port 2 are connected）
Date issued
Date revised
Sep.1,2018
Oct.1,2020
Model Name
Model No.
ZEQUO 6600RE
PN36241E-SG
5. Hardware Specifications
5－1. Interface
401-36241E-SG-SP03
Product Specification
Page 3 of 13
Twisted pair port 1-24 ：RJ45 connector
Transmitting and receiving network system：
IEEE802.3 10BASE-T IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T Transmission speed ：10/100/1000Mbps, full/half duplex Compatible cable ：Twisted pair cable
（At least equivalent to EIA/TIA568 category 5e） Maximum transmission distance ：100m Auto-Negotiation ：Communication speed and full/half duplex are
automatically recognized.
The setting can be fixed to 10Mbps, 100Mbps,
or 1000Mbps and full duplex or half duplex.
Power saving mode ： Detects the connection status automatically
and saves power consumption to minimum.
SFP extension slot 21-24
SFF-8472（DMI：Diagnostic Monitoring Interface）
*Select either of RJ45 or SFP for use（Port21-24） Optional Accessories： 1000BASE-SX SFP Module （PN54021K）
1000BASE-LX SFP Module （PN54023K）
5－2. Switching mode
SFP+ extension slot 25-28
SFF-8472（DMI：Diagnostic Monitoring Interface）
*Select either of RJ45 or SFP for use Optional Accessories： 1000BASE-SX SFP Module （PN54021K）
1000BASE-LX SFP Module （PN54023K） 10GBASE-SR SFP+ Module （PN59021） 10GBASE-LR SFP+ Module （PN59023）
Stack port 29-30
Optional Accessories： 40G direct attach cables 1m（OPQSFP-T01 ）
40G direct attach cables 2m（OPQSFP-T02 ）
FAN Module slot 2slot
Supported FAN Module model: FAN01 Module（PN73002） Hot swap: Supported
PSU Module slot 2slot
Supported PSU Module model: RP02-200W Module（70002） Hot swap: Supported
Switching method ：Store and Forward Switching capacity ：288Gbps Packet transfer capability ：Non-blocking
Max 14,880,000pps/port（10Gbps） Max 1,488,000pps/port（1000Mbps） Max 148,800pps/port（100Mbps）
Max 14,880pps/port（10Mbps） MAC Address table ：Max 96K entry/unit Buffer memory ：4M Byte/unit Flow control ：half-duplex Back pressure
full-duplex IEEE802.3x Aging timeout ：10 to 1,000,000 sec. (Default: 300 sec.) Jumbo frame ：13KB
Date issued
Date revised
Sep.1,2018
Oct.1,2020
Model Name
Model No.
ZEQUO 6600RE
PN36241E-SG
5. Hardware Specifications
5－3. Terminal emulator
connection
5－4. Stack Number of units ：Four units max.(stackable with
5－5. SD card slot
5－6. LED display
401-36241E-SG-SP03
Product Specification
Page 4 of 13
Console port ：RJ45 connector 1 port
Transmission mode ：RS-232C（ITU-TS V.24） Emulation mode ：VT100 Communication configuration ：9,600bps, 8bit, None Parity control,
Stop bit 1 bit
ZEQUO6600RE and ZEQUO 6700RE) Bandwidth ：80Gbps max. Stack topology ：Chain, Ring
SD card slot ：1slot
Standard ：SD/SDHC Size ：128MByte to 32GByte
(1) POWER1 LED
Green Light : Power is ON. Off : Power is OFF or Internal power supply error.
(2) POWER2 LED
Green Light : Power is ON. Off : Power is OFF or Internal power supply error.
(3) STATUS LED
Green Light : The system is normally operating. Orange Light : Starting Orange Blink : Malfunction (Contact the seller.) Off : Power is OFF.
(4) SD CARD LED
Green Light : SD card inserted Green Blink : Reading/writing data Orange Blink : SD card error Off : No SD card
(5) STACK ID LED
Indicating “H” and the STACK ID alternately : Master switch Indicating “h” and the STACK ID alternately : Backup master switch Indicating the STACK ID : Slave switch
*The following information is also displayed depending upon the device’s state.
“P” : Power failure “11” : Fan1 failure “12” : Fan2 failure “13” : Fan1 or Fan2 failure “L” : Within 3 days after a loop resolution
(5) Port LED
LINK/ACT. (Port 1-24)
Green Light : Link is established at 10/100/1000 Mbps. Green Blink : Transmitting and receiving data at 10/100/1000 Mbps. Orange Light : Shuts off due to loop detection and shutoff functions/
storm controls/BPDU guard Orange Blink : Transmitting and receiving just the administration packets Off : No devices are connected.
Date issued
Date revised
LINK/ACT. (Port 21-24)
Green Light : Link is established at 1000 Mbps. Green Blink : Transmitting and receiving data at 1000 Mbps. Orange Light : Shuts off due to loop detection and shutoff functions/
storm controls/BPDU guard Orange Blink : Transmitting and receiving just the administration packets Off : No devices are connected.
Sep.1,2018
Oct.1,2020
Loading...
+ 9 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use