Panasonic ZEQUO 2200 Specification
Model
Name
Model
No.
ZEQUO 2200
Product Specification
PN26241-SG
1. Summary
ZEQUO 2200 is a Layer 2 Switching Hub with management function having 10BASE-T/100BASE-TX/1000BASE-T ports,
and SFP extension slots.
2. Feature
（1） Has wire-speed Layer 2 switching function.
（2） Ports 1 to 28 are 10/100/1000BASE-T ports corresponding to auto negotiation.
The speed and communication mode can be changed by setting.
However, ports 25 to 28 do not support the half-duplex mode.
Ports 25 to 28 can be used exclusively as an SFP extension slot.
（3） Ports 25 to 28 also have SFP extension slots.
These ports and the 10/100/1000BASE-T twisted pair cable ports cannot be used simultaneously.
（4） Settings and firmware can be changed and saved by using an SD card.
（5） All twisted pair ports support straight/cross cable by auto sensing function.
Simply connect devices with straight cables by setting, whether it is a terminal or a network device.
（6） Power saving mode detects the connection status automatically and saves power consumption to minimum.
401-26241-SG-SP03
Page 1 of 9
（7） Supports ring protocol.
Connecting Switching Hubs in a ring topology enables a redundant structure.
（8） Supports ZEQUO assist Plus. Processes from introduction to maintenance can be performed easily.
Date issued
Date revised
July. 4, 2016
Panasonic Life Solutions Networks Co., Ltd.
Oct. 1, 2020
Model
Name
Model
No.
ZEQUO 2200
PN26241-SG
3. Rated/Environmental Conditions
3－1. Power supply
3－2. Power consumption
3－3. Operating environment
3－4. Storage environment
3－5. EMC compliance
3－6. Safety compliance IEC 60950-1
3－7. Environment compliance
401-26241-SG-SP03
Product Specification
Page 2 of 9
AC100-240V, 50/60Hz, 2.0A （with a built-in power supply）
Normally, Max.23.7W, Min.12.4W
Temperature: 0 - 50℃
Humidity: 20 - 80%RH （no condensation）
Temperature: -20 - 70℃
Humidity: 10 - 90%RH （no condensation）
CISPR 32 Class A
EN 55032 Class A
AS/NZS CISPR22 Class A
VCCI Class A
EN 61000-3-2, EN 61000-3-3
CISPR 24
EN 55024
IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11
EN 60950-1
RoHS compliant
4. Form
4－1. Form and materials/colors
4－2. Mass（Weight） 3,800 g
Dimensions : 44mm（Height）×440mm（Width）×312mm（Depth）
（Excluding protruding sections）
Case material : Main unit: SECC, Front face: PC/ABS, Face plate: PC
Color : Main unit: Green 03, Front face: Black 02,
Face plate label: Black 01
Date issued
Date revised
July. 4, 2016
Panasonic Life Solutions Networks Co., Ltd.
Oct. 1, 2020
Model
Name
Model
No.
ZEQUO 2200
PN26241-SG
5. Hardware Specifications
5－1. Interface Twisted pair port 1-24 : RJ45 connector
401-26241-SG-SP03
Product Specification
Page 3 of 9
Transmitting and receiving network system :
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
Transmission speed : 10/100/1000Mbps, full/half duplex
1000Mbps full duplex.
Compatible cable : Twisted pair cable
（At least equivalent to EIA/TIA568 category 5e）
Maximum transmission distance : 100m
Auto-Negotiation : Communication speed and full/half duplex are
automatically recognized.
The setting can be fixed to 10Mbps, 100Mbps,
or 1000Mbps and full duplex or half duplex.
Power saving mode ： Detects the connection status automatically
and saves power consumption to minimum.
Energy Efficient Ethernet (EEE) conforming to IEEE802.3az (LPI)：
When there is no data transmission at link up,
the energy-saving state automatically starts
so that power consumption can be reduced
on each port.
5－2. Switching mode
Twisted pair port 25-28 : RJ45 connector
Transmitting and receiving network system :
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE 802.3ab 1000BASE-T
Transmission speed : 10/100/1000Mbps, full/half duplex
1000Mbps full duplex.
Compatible cable : Twisted pair cable
（At least equivalent to EIA/TIA568 category 5e）
Maximum transmission distance : 100m
Auto-Negotiation : Communication speed and full/half duplex are
automatically recognized.
The setting can be fixed to 10Mbps, 100Mbps,
or 1000Mbps and full duplex or half duplex.
Power saving mode ： Detects the connection status automatically
and saves power consumption to minimum.
Energy Efficient Ethernet (EEE) conforming to IEEE802.3az (LPI)：
When there is no data transmission at link up,
the energy-saving state automatically starts
so that power consumption can be reduced
SFP+ extension slot 25-28
SFF-8472（DMI：Diagnostic Monitoring Interface）
* Select either of RJ45 or SFP for use
Optional Accessories: 1000BASE-SX SFP Module(PN54021K-ID)
Switching method : Store and Forward
Switching capacity : 56Gbps
Packet transfer capability : Non-blocking
MAC Address table : Max 16K entry/unit
Buffer memory : 1.5M Bytes/unit
Flow control : half-duplex Back pressure
Aging timeout : 10 to 1,000,000 sec. (Default: 300 sec.)
Jumbo frame : 9KB
on each port.
1000BASE-LX SFP Module(PN54023K-ID)
Max 1,488,000pps/port（1000Mbps）
Max 148,800pps/port（100Mbps）
Max 14,880pps/port（10Mbps）
full-duplex IEEE802.3x
Date issued
Date revised
July. 4, 2016
Panasonic Life Solutions Networks Co., Ltd.
Oct. 1, 2020
Loading...