Panasonic WV-CF314LE, WV-CF304LE Installation Manual
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
This illustration represents WV-CF314LE.
Installation Guide
Color CCTV Camera
Model No:
WV-CF314LE
WV-CF304LE
2
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
CAUTION
RISK OF ELECTRIC
SHOCK DO NOT OPEN
The lightning flash with arrowhead
symbol, within an equilateral triangle, is intended to alert the user to
the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute
a risk of electric shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence of
important operating and maintenance (servicing) instructions in
the literature accompanying the
appliance.
WARNING:
•To prevent fireorelectricshockhazard, do not
expose this apparatus to rain or moisture.
•Theapparatusshouldnotbeexposedtodripping
or splashing and that no objects filled with
liquids, such as vases, should be placed on the
apparatus.
•Allworkrelatedtotheinstallationofthisproduct
should be made by qualified service personnel or
system installers.
•Topreventinjury,thisapparatusmustbesecurely
attached to the floor/wall/ceiling in accordance
with the installation instructions.
•Theinstallationshallbecarriedoutinaccordance
with all applicable installation rules.
•Thisproducthasnopowerswitch.
When turning off the power, turn off a Power
Supply or remove a power cable.
•The connections should comply withlocal
electrical code.
We declare under our sole responsibility that the
product to which this declaration relates is in
conformity with the standards or other normative
documents following the provisions of Directive
2004/108/EC.
Wij verklaren als enige aansprakelijke, dat het
product waaropdezeverklaringbetrekkingheeft,
voldoet aan de volgende norm of ander normatief
dokument, overeenkomstig de bepalingen van
Richtlijn 2004/108/EC.
Wir erklären in alleiniger Verantwortung, daß das
Produkt,aufdassichdieseErklärungbezieht,mitder
folgenden Norm oder normativen Dokument
übereinstimmt. Gemäß den Bestimmungen der
Richtlinie 2004/108/EC.
Vi erklærer os eneansvarlige for, at dette produkt, som
denne deklaration omhandler, er i overensstemmelse
med standard eller andre normative dokumenter i
følge bestemmelserne i direktiv 2004/108/EC.
Nous déclarons sous notre propre responsabilité que
le produit auquel se réfère la présente déclaration est
conforme á la norme spécifiée ou à tout autre
document normatif conformément aux dispositions
de la directive 2004/108/CE.
Nosotros declaramos bajo nuestra única
responsabilidad que el producto a que hace
referencia esta declaración está conforme con la
norma u otro documento normativo siguiendo las
estipulaciones de la directiva 2004/108/CE.
Noi dichiariamo sotto nostra esclusiva responsabilità
che il prodotto a cui si riferisce la presente
dichiarazione risulta conforme al seguentestandard
o altro documento normativo conforme alle
disposizionidelladirettiva2004/108/CE.
Vi deklarerar härmed vårt fulla ansvar för att den
produkt till vilken denna deklaration hänvisar är i
överensstämmelse med standarddokument eller
annat normativt dokument som framställs i direktiv
2004/108/EC.
Ilmoitamme yksinomaisella vastuullamme, että tuote,
jota tämä ilmoitus koskee, noudattaa seuraavaa
standardia tai muuta ohjeellista asiakirjaa, jotka
noudattavat direktiivin 2004/108/EC säädöksiä.
Vi erklærer oss alene ansvarlige for at produktet som
denne erklæringen gjelder for, er i overensstemmelse med
følgende norm eller andre normgivende dokumenter som
følger bestemmelsene i direktiv 2004/108/EC.
3
Contents
Important safety instructions ........................................................................................................... 4
Limitation of liability
......................................................................................................................... 5
Disclaimer of warranty
.................................................................................................................... 5
Preface
........................................................................................................................................... 6
About notations
............................................................................................................................. 6
Features
......................................................................................................................................... 6
About the user manuals
.................................................................................................................. 7
Trademarks and registered trademarks
........................................................................................... 7
Precautions
.................................................................................................................................... 8
Precautions for installation
............................................................................................................ 10
Major operating controls and their functions
................................................................................. 12
Preparations
................................................................................................................................. 14
Remove the dome cover
............................................................................................................ 14
About the side cable access hole
.............................................................................................. 15
Installation method of camera
.................................................................................................... 15
Using a gang junction box (locally procured)
........................................................................... 15
Installing the camera directly on a wall or ceiling
....................................................................... 16
Connections
............................................................................................................................... 16
Connect the video output
........................................................................................................ 16
Connect the power supply
....................................................................................................... 16
Installation
................................................................................................................................... 18
Installation of camera
................................................................................................................ 18
Adjustment
................................................................................................................................... 19
Attaching the dome cover
............................................................................................................. 22
Setup menu
.................................................................................................................................. 23
List of setup menu
..................................................................................................................... 23
Basic operation
............................................................................................................................ 24
Screen transition diagram
CF314L
................................................................................................. 26
Screen transition diagram
CF304L
................................................................................................. 27
Troubleshooting
........................................................................................................................... 28
Specifications
.............................................................................................................................. 29
Standard accessories
.................................................................................................................. 30
4
Important safety instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's
instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce heat.
9) Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the apparatus.
10) Only use attachments/accessories specified by the manufacturer.
11) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use caution when moving the cart/ apparatus
combination to avoid injury from tip-over.
12) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has
been damaged in any way, such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
S3125A
5
Limitation of liability
THIS PUBLICATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY, FITNESS FOR ANY PARTICULAR PURPOSE, OR NON-INFRINGEMENT OF
THE THIRD PARTY'S RIGHT.
THIS PUBLICATION COULD INCLUDE TECHNICAL INACCURACIES OR TYPOGRAPHICAL
ERRORS. CHANGES ARE ADDED TO THE INFORMATION HEREIN, AT ANY TIME, FOR THE
IMPROVEMENTS OF THIS PUBLICATION AND/OR THE CORRESPONDING PRODUCT (S).
Disclaimer of warranty
IN NO EVENT SHALL Panasonic System Networks Co., Ltd. BE LIABLE TO ANY PARTY OR ANY
PERSON, EXCEPT FOR REPLACEMENT OR REASONABLE MAINTENANCE OF THE PRODUCT,
FOR THE CASES, INCLUDING BUT NOT LIMITED TO BELOW:
(1) ANY DAMAGE AND LOSS, INCLUDING WITHOUT LIMITATION, DIRECT OR INDIRECT,
SPECIAL, CONSEQUENTIAL OR EXEMPLARY, ARISING OUT OF OR RELATING TO THE
PRODUCT;
(2) PERSONAL INJURY OR ANY DAMAGE CAUSED BY INAPPROPRIATE USE OR NEGLIGENT
OPERATION OF THE USER;
(3) UNAUTHORIZED DISASSEMBLE, REPAIR OR MODIFICATION OF THE PRODUCT BY THE
USER;
(4) INCONVENIENCE OR ANY LOSS ARISING WHEN IMAGES ARE NOT DISPLAYED, DUE TO
ANY REASON OR CAUSE INCLUDING ANY FAILURE OR PROBLEM OF THE PRODUCT;
(5) ANY PROBLEM, CONSEQUENTIAL INCONVENIENCE, OR LOSS OR DAMAGE, ARISING
OUT OF THE SYSTEM COMBINED BY THE DEVICES OF THIRD PARTY;
(6) ANY CLAIM OR ACTION FOR DAMAGES, BROUGHT BY ANY PERSON OR ORGANIZATION
BEING A PHOTOGENIC SUBJECT, DUE TO VIOLATION OF PRIVACY WITH THE RESULT OF
THAT SURVEILLANCE-CAMERA'S PICTURE, INCLUDING SAVED DATA, FOR SOME
REASON, BECOMES PUBLIC OR IS USED FOR ANY PURPOSE.
6
Preface
About notations
Features
Introduction of newly developed high-resolution CCD
The introduction of the newly developed CCD with 976 horizontal pixels has led to a horizontal resolution of as high as 650 TV lines.
High sensitivity achieved because of noise reduction function
Sensitivity at the following minimum illuminations has been accomplished for color images because
of the introduction of low noise circuit design:
CF314L
: Lens (built in): F1.3: 0.08 lx (color), 0 lx (black-and-white, IR LED on)
CF304L
: Lens (built in): F2.0: 0.15 lx (color), 0 lx (black-and-white, IR LED on)
Day/Night conversion function equipped
No setup change is required at night because the image automatically changes from the color
mode to the black-and-white mode at low illuminance.
Clear images can be captured even at night or at low illuminance because of automatic switching
of IR filters as well as automatic turning on of IR LED.
Automatic back focus adjustment function equipped
CF314L
Auto focus is achieved at installation of the camera or through menu operation.
Infrared mode function
According to the distance of objects, illumination intensity of the infrared LED lights will automatically change to avoid white phenomenon when close targets are captured.
The following notations are used when describing the functions limited for specific models. The
functions without the notations are supported by all models.
CF314L
: The functions with this notation are available when using the model WV-CF314LE.
CF304L
: The functions with this notation are available when using the model WV-CF304LE.
This product is a 1/3-type CCD color CCTV camera. Clear images can be captured although at the
illuminance of 0 lx (black-and-white and IR LED on). Connection of this product to a video monitor
allows users to use this product as a monitoring camera.
• WV-CF314LE: with color / black-and-white mode switch function and automatic back focus
adjustment function
• WV-CF304LE: with color / black-and-white mode switch function
7
About the user manuals
The operating instructions of the camera consist of 2 sets: this book and operating instructions
(PDF).
This book explains how to install the camera.
Refer to the "Operation Instructions (PDF)" on the provided CD-ROM for descriptions of how to
perform the unit settings. Adobe
®
Reader® is required to read PDF. When the Adobe® Reader®
is not installed on the PC, download the latest Adobe
®
Reader® from the Adobe web site and
install it.
Trademarks and registered trademarks
Adobe, Acrobat Reader and Reader are either registered trademarks or trademarks of Adobe
Systems Incorporated in the United States and/or other countries.
Motion detection function (VMD) equipped
The motion of an object is detectable. The acts of covering the camera with a cloth, a cap or other
acts and changing the camera direction during surveillance can be detected.
Note:
• The VMD function is not the dedicated function to prevent thefts, fires, etc. We are not
responsible for any accidents or damages caused by applying the function for the above
purposes.
8
Precautions
Refer installation work to the dealer.
Installation work requires technique and
experiences. Otherwise injury or damage to
this product may result.
Be sure to consult the dealer.
Do not insert any foreign objects.
This could permanetly damage this product.
Turn the power off immediately and contact
qualified service personnel for service.
Do not attempt to disassemble or modify
this product.
Failure to observe this may cause fire or
electric shock.
Consult the dealer for the repair or inspections.
Stop operation immediately when
something is wrong with this product.
When smoke goes up from this product or the
smell of smoke comes from this product,
continued use will result in fire, injury, or
damage to the product.
Turn the power off immediately and contact
qualified service personnel for service.
Select an installation area that can
support the total weight.
Selecting an inappropriate installation surface
may cause the product to fall down or topple
over, resulting in injury.
Installation work shall be started after sufficient
reinforcement.
Periodic inspections shall be conducted.
Rust on the metal parts or screws may cause
the product to fall down resulting in injury or
accidents.
Consult the dealer for the inspections.
This product shall be installed in a
vibration-free place.
Failure to observe this may cause screws and
bolts to be loosened and consequently to fall
resulting in injury.
Install this product in a location high
enough to avoid people and objects from
bumping the product.
Failure to observe this may cause a drop
resulting in injury or accidents.
Do not strike or give a strong shock to this
product.
Failure to observe this may cause injury or fire.
Turn the power off when do wiring of this
product.
Failure to observe this may cause electric
shock. A short circuit or wrong wiring may
cause fire.
Do not use this product in an atmosphere
of flammable gases.
Failure to observe this may cause injury by
explosion.
Avoid installing this product in locations
where it is subject to damage by salt or
corrosive gas.
Otherwise the mounting fixtures will
deteriorate, causing the product to fall down
and leading to accidents.
Tighten screws and mounting fixtures to
the specified torque.
Failure to observe this may cause a drop
resulting in injury or accidents.
[Precautions for use]
This product is designed to be used
indoors.
This product is not operable outdoors.
This product has no power switch.
When turning off the power, turn off a circuit
breaker.
9
To keep on using with stable performance
Parts of this product may deteriorate and it
may shorten the lifetime of this product when
using in locations subject to high temperatures
and high humidity. (Recommended operating
temperature: +35 °C or lower)
Do not expose this product to direct heat
sources such as a heater.
Handle this product with care.
Do not drop this product, nor apply shock or
vibration to the product. Failure to observe this
may cause trouble. If a strong shock or vibration
is applied to the front cover, it may cause
damage or allow water to enter this product.
Do not touch the dome cover with your
bare hands.
A dirty dome cover causes deterioration of
picture quality.
Noise on monitor
This product is equipped with a super sensitive
CCD. Therefore, noise may appear on the
monitor. This phenomenon is not trouble.
Discoloration on the CCD color filter
When continuously shooting a bright light
source such as a spotlight, the color filter of
the CCD may have deteriorated and it may
cause discoloration. Even when changing the
fixed shooting direction after continuously
shooting a spotlight for a certain period, the
discoloration may remain.
Do not aim this product at strong light sources.
A light source such as a spot light causes a
blooming (light bleeding) or a smear (vertical lines).
Cleaning this product body
Be sure to turn off the power before cleaning.
Failure to observe this may cause injury. Do not
use strong abrasive detergent when cleaning
this product. Otherwise, it may cause
discoloration. When using a chemical cloth for
cleaning, read the caution provided with the
chemical cloth product.
Cleaning the lens
Use a lens cleaning paper (used to clean
camera lenses or lenses of spectacles). When
using solvent, use an alcohols solvent and do
not use a thinner or a glass cleaner.
Synchronous mode setting
Image synchronous mode of this camera
indicates internal synchronization (INT) only. Set
the multiplexed vertical drive (VD2) as OFF
when the camera is connected to the system
controller of the company.
Blooming
Smear Bright subject
10
Precautions for installation
Panasonic assumes no responsibility for
injuries or property damage resulting from
failures arising out of improper installation
or operation inconsistent with this
documentation.
This product is designed to be used
indoors.
This product is not operable outdoors.
Do not expose the product to direct sunlight
for hours and do not install the product near a
heater or an air conditioner. Otherwise, it may
cause deformation, discoloration and
malfunction. Keep the product away from
water and moisture.
Installing place
Contact your dealer for assistance if you are
unsure of an appropriate place in your
particular environment.
• Make sure that the installation area is
strong enough to hold the product, such
as a concrete ceiling.
• Install the camera in the foundation area of
the architecture or where sufficient
strength is assured.
• If a ceiling board such as plaster board is
too weak to support the total weight, the
area shall be sufficiently reinforced.
Avoid installing this product in the following locations.
• Location where it may get wet from rain or
water splash.
• Locations where a chemical agent is used
such as a swimming pool.
• Locations subject to steam and oil smoke
such as a kitchen.
• Locations near flammable gas or vapor.
• Locations where radiation or x-ray
emissions are produced.
• Locations where corrosive gas is
produced, Locations where it may be
damaged by briny air such as seashores.
• Locations where the temperature is not
within –10 °C to +50 °C.
• Locations subject to vibrations (This
product is not designed for on-vehicle
use.)
• Locations subject to condensation as the
result of severe changes in temperature (In
case of installing the product in such
locations, the dome cover may become
foggy or condensation may be caused on
the cover.)
Avoid moist or dusty places to install this
product.
Otherwise, lifetime of the internal parts may be
shortened.
Avoid installing this product in a place
with a high level of noise.
Installation near an air conditioner, an air
cleaner, a vending machine, or the like causes
noise.
Avoid installing and connecting during a
lightning storm. Otherwise, an electric
shock or fire may be caused.
Be sure to remove this product if it is not
in use.
Do not damage the power plug or cable.
Keep the camera cable away from the
lighting cable.
Failure to observe this may cause noise.
Radio interference
When the camera is used near TV/radio
antenna, strong electric field or magnetic field
(near a motor or a transformer), images may be
distorted and noise sound may be produced.
In such a case, run the camera cable through
specialized steel conduit tubes.
Loading...