Panasonic WV-BP332, WV-BP334 User Manual

(Lens : option)
Before attempting to connect or operate this product,
please read these instructions completely.
CCTV Cameras

WV-BP330/WV-BP332/WV-BP334

FRANÇAIS
WARNING:
TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
The serial number of this product may be found on the top of the unit. You should note the serial number of this unit in the space provided and retain this book as a permanent record of your purchase to aid identification in the event of theft.
Model No. Serial No.
Warning:
This equipment generates and uses radio frequency energy and if not installed and used properly, i.e., in strict accor­dance with the instruction manual, may cause harmful interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 of FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment.
For U.S.A
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SER­VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PER­SONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lightning flash with arrowhead sym­bol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilater­al triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompa-nying the appli­ance.
SA 1965
SA 1966

CONTENTS

PREFACE ........................................................................................................................................................................ 2
FEATURES ...................................................................................................................................................................... 2
PRECAUTIONS ............................................................................................................................................................... 3
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS ......................................................................................... 4
CONNECTIONS .............................................................................................................................................................. 8
FOCUS OR FLANGE-BACK ADJUSTMENT .................................................................................................................. 13
INSTALLATION OF CAMERA ........................................................................................................................................ 14
PREVENTION OF BLOOMING AND SMEAR ................................................................................................................ 15
SPECIFICATIONS .......................................................................................................................................................... 16
STANDARD ACCESSORIES ......................................................................................................................................... 17
-1-
-2-
1. The following functions are built-in. (1) Auto Light Control (ALC)/Electronic Light
Control (ELC)
(2) Back Light Compensation (ON: Photometric
weight is given to the center of the screen/OFF: Effective if the object is not in the center of the screen)
(3) Various External Sync Functions, including
Gen-Lock
2. Signal-to-noise ratio of 50 dB
3. Minimum illumination of 0.08 lux (0.008 foot-can-
dle) with F1.4 lenses
4. Horizontal resolution of 570 lines
5. Shooting of shoot indoor scenes with fixed iris lens
by use of Electronic Light Control (ELC) function
els (picture elements), and digital signal processing LSI’s. This model offers cutting-edge technology for advanced video surveillance.
PREF ACE
Panasonic’s WV-BP330 series digital cameras intro­duce a new level of high picture quality and high reso­lution through the use of a 1/3-inch frame interline transfer CCD image sensor having 768 horizontal pix-
FEATURES
6. Selectable auto iris control signal for the lens from a video signal or DC control signal
-3-
1. Do not attempt to disassemble the camera.
To prevent electric shock, do not remove screws or covers.
There are no user serviceable parts inside. Ask a qualified service person for servicing.
2. Handle the camera with care.
Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage.
3. Do not expose the camera to rain or moisture, or try to operate it in wet areas.
Turn the power off immediately and ask a qualified service person for servicing. Moisture can damage the camera and also create the danger of electric shock.
4. Do not use strong or abrasive detergents when cleaning the camera body.
Use a dry cloth to clean the camera when dirty. In case the dirt is hard to remove, use a mild detergent and wipe gently.
5. Clean the CCD faceplate with care.
Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton tipped applicator and ethanol.
6. Never face the camera towards the sun.
Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.
7. Do not operate the camera beyond the specified temperature, humidity or power source ratings.
Use the camera under conditions where tempera­ture is between –10°C - +50°C (14°F - 122°F), and humidity is below 90%. The input power source is 120V AC 60Hz for WV-BP330, 12V DC for WV­BP332, and 24V AC 60Hz for WV-BP334.
Caution:
To prevent fire or electric shock hazard, a UL listed wire (VW-1, style 1007) should be used for DC 12V or AC 24V Input Terminals.
PRECAUTIONS
-4-

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

<WV-BP330>

GEN-LOCK
VIDEO OUT
INT
LL
AGC ON
OFF
ALC
ELC
BLC ON
OFF
VIDEO
DC
Hi-Z
G/L 75
V. PHASE
VIDEO LEVEL
L
H
WV-
BP330

<WV-BP332>

<WV-BP334>

DC 12V IN
GEN-LOCK
AC 24V IN
12
GEN-LOCK
VIDEO OUT
GND
VIDEO OUT
AGC ON
OFF
ALC
ELC
BLC ON
OFF
VIDEO
DC
Hi-Z
G/L 75
VIDEO LEVEL
L
H
INT
LL
AGC ON
OFF
ALC
ELC
BLC ON
OFF
VIDEO
DC
Hi-Z
G/L 75
V. PHASE
VIDEO LEVEL
L
H
Loading...
+ 14 hidden pages