Panasonic VL-DM200BX User Manual

PRESS TALK

VL-DM200

Operating Instructions

Model No. VL-DM200BX

Wireless Door Monitor

Thank you for purchasing a Panasonic product.

Please read this manual before using the unit and save for future reference.

The unit can be paired to the VL-SDM200BX (Base Unit: VL-MDM200BX).

Before using the unit, it must be charged and paired to the Base Unit ( This manual only covers the information necessary for pairing and initial use of the unit. For detailed information about operations, see Operating Instructions for Wireless Door Camera (VL-SDM200BX).

page 9, 10).

Table of Contents

Introduction

Product information .............................................

Accessory information ........................................3

Important Information

For your safety ....................................................5

Important safety instructions ...............................7

For best performance .........................................7

Other information ................................................8

Getting Started

Charging the Wireless Monitor ...........................9

Pairing to the Base Unit ....................................10

Canceling the Wireless Monitor ........................11

General Information

Specifications ....................................................12

Introduction

Product information

The unit is an additional Wireless Monitor designed to be used with the Panasonic Wireless Door Camera (described in this manual as VL-SDM200BX). In order to use the unit, it must be paired to the Base Unit of the VL-SDM200BX. R Devices in this manual are described in the following way.

Wireless Door Camera

VL-SDM200BX

Wireless Camera Base Unit Wireless Monitor

The unit

Accessory information

Supplied accessories

Charger

… ´ 1

AC adaptor

… ´ 1

Battery pack … ´ 1

Operating Instructions … ´ 1

*1 Cradle Charger is described in this manual as Charger.

Only used for charging (doesn’t have functions like the Base Unit).

Only connect the Charger to Power sources in areas that do not display

*2 Used for the Charger.

(Out of range).

Introduction

Additional/replacement accessories

Battery pack for Wireless Monitor: CGA-LB102

– *1 As of February, 2013.

Note:

esign and specifications are subject to change without notice.

R D R The illustrations in these instructions may vary slightly from the actual product.

License:

R Portions of this software are based in part on the work of the Independent JPEG Group.

Trademarks:

R All other trademarks identified herein are property of their respective owners.

Important Information

For your safety

o prevent severe injury and loss of life/property, read this section carefully before using the product to

ensure proper and safe operation of your product.

WARNING

Power connection

R U

se only the power source marked on the unit. If you are not sure of the type of power supplied to your

home, consult your dealer or local power company.

R Use only the specified AC adaptor. R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor into the power outlet. Failure to do so may cause electric shock and/

or excessive heat resulting in a fire.

R Regularly remove any dust, etc. from the AC adaptor by pulling it from the power outlet, then wiping

with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.

R If the unit emits smoke or an abnormal smell, or makes an unusual noise, immediately unplug the AC

adaptor from the power outlet and remove the battery pack. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center.

R Never touch the plug with wet hands. Danger of electric shock exists.

Installation

R D

o not use the unit in areas that are exposed to rain, moisture, steam, or oily smoke, or areas that

have excessive dust. This may cause fire or electric shock.

R Do not install or use this product near automatically controlled devices such as automatic doors and

fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.

R Do not perform any actions (such as damaging, altering, exposing to heat sources, or placing heavy

objects on the AC adaptor) that may damage the AC adaptor. Using the unit with a damaged AC adaptor may cause electric shock, short circuits, or fire. Contact an authorized service center for repairs.

Operating safeguards

R T

o reduce the risk of electric shock, do not disassemble this unit. Refer servicing to an authorized service center when service is required. Opening covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.

R Do not touch the Charger or the AC adaptor during an electrical storm. There may be a remote risk of

electric shock from lightning.

R Never put metal objects inside the unit. This may cause fire or electric shock. If metal objects enter the

unit, immediately unplug the AC adaptor from the power outlet and refer servicing to an authorized service center.

R Never spill any liquids on the unit or get the unit wet in any way. This may cause fire, electric shock, or

injury. If the unit becomes wet, immediately unplug the AC adaptor from the power outlet and refer servicing to an authorized service center.

R Never spill any liquids on the AC adaptor, or get the AC adaptor wet in any way. This may cause fire,

electric shock, or injury. If the AC adaptor becomes wet, immediately unplug the AC adaptor from the power outlet and refer servicing to an authorized service center.

R Unplug this unit from power outlets and refer servicing to an authorized service center when the

following conditions occur: – If the AC adaptor is damaged or frayed. – If metal objects have been dropped inside the Charger.

+ 11 hidden pages