Panasonic Viera TX-32LZ85L, Viera TX-37LZ85L, TX-37LZ80L, TX-32LZ80L Operating Instructions Manual
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.
Operating Instructions
LCD Television
Model No.
TX-32LZ85L
TX-37LZ85L
2
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
3
Viewing Advanced FAQs, etc.
Quick Start Guide
media excitement
Enjoy rich multi-media
Camcorder
Amplifi er with
Speaker system
VCR
DVD player
DVD Recorder
Personal
computer
Set top box
SD memory Card
Contents
Be Sure to Read
•
Safety Precautions ······································4
(Warning / Caution)
•
Notes ··························································· 5
•
Maintenance ··············································· 5
Quick Start Guide
•
Accessories / Options ········· 6
•
Identifying Controls ·············· 7
•
Basic Connection ·················· 8
•
Auto Setup ······························ 10
Enjoy your TV!
Basic Features
•
Watching TV ·············································· 12
•
Viewing Teletext ········································ 14
•
Watching Videos and DVDs ······················ 16
Advanced Features
•
How to Use Menu Functions ·····················18
(picture, sound quality, etc.)
•
Editing Programmes ································· 22
•
Tuning Programmes ·································· 24
•
Control Programme Audience ·················· 26
•
Restore Settings ······································ 27
•
Input Labels ·············································· 28
•
Displaying PC Screen on TV ····················· 29
•
Viewing from SD Card (Photos) ················30
•
Link Functions ··········································32
(Q-Link / VIERA Link)
•
External Equipment ··································· 38
FAQs, etc.
•
Technical Information ································ 40
•
FAQs ·························································44
•
Licence ······················································ 46
•
Specifi cations ············································ 47
Up to 60,000 hours LCD Panel Lifetime
The LCD display panel used in the 2008 VIERA TV
range is rated for up to 60,000 hours.
∗
∗
This measurement is based on the time taken for the brightness of
the panel to reduce to half of it’s maximum level.
The time taken to reach this level may vary depending on the
image content and the environment where the TV is used.
Malfunctions are not taken into account.
4
Safety Precautions
Warning & Caution
Do not place the TV on
sloped or unstable
surfaces
•
The TV may fall off or tip over.
Handling the mains plug
and lead
•
Ensure that the mains plug is easily
accessible at all times. The On / Off switch
on this model does not fully disconnect the
TV from the mains supply. Remove the
mains plug from the wall socket when the
TV is not used for a prolonged period of
time.
Do not expose to direct
sunlight and other
sources of heat
•
Avoid exposing the TV to direct sunlight
and other sources of heat. To prevent fi re
never place any type of candle or naked
fl ame on top or near the TV.
Do not expose your ears to excessive
volume from the headphones
•
Irreversible damage can be caused.
Do not remove the cover
•
Do not remove the rear cover as live parts are accessible when it
is removed. There are no user serviceable parts inside.
Power source
•
This TV is designed to operate on 220-240 V, 50 / 60 Hz AC.
AC 220-240 V
50 / 60 Hz
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This TV is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fi tted in this
mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and
that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark on the body of the fuse.
If the mains plug contains a removable fuse cover, you must ensure that it is refi tted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local Panasonic dealer.
If the fi tted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be
removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock if the
cut off mains plug is inserted into any 13 amp socket.
If a new mains plug is to be fi tted, please observe the wiring code as shown below.
If in any doubt, please consult a qualifi ed electrician.
IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Blue: Neutral Brown: Live
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your mains plug, proceed as follows.
The wire which is coloured BLUE must be connected to the terminal in the mains plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the mains plug which is
marked with the letter L or coloured RED.
Under no circumstances should either of these wires be connected to the Earth terminal of the
three pin mains plug, marked with the letter E or the earth symbol .
How to replace the fuse.
For plug type shown in example 1:
Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refi t
securely into the mains plug (see example 1).
For plug type shown in example 2:
Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse,
then press the fuse cover down securely (see example 2).
Example 1
Example 2
5
Notes
Maintenance
15°
a
b
15°
(View from the top)
Set the mark at the centre as illustrated,
to have the swivel positioned at the
centre of the rotation angle.
•
TX-32LZ85L
a: 407 mm / b: 303 mm
•
TX-37LZ85L
a: 463.5 mm / b: 380 mm
Use only the
dedicated pedestals /
mounting equipment
•
Using an unapproved pedestal or
other fi xtures may make the TV
unstable, risking injury. Be sure to
ask your local Panasonic dealer to
perform setup.
•
Use approved pedestals / mounts
(p. 6).
Do not allow children
to handle SD Card
•
As with a small object, SD Card
can be swallowed by young
children. Please remove SD Card
immediately after use.
■ Auto power standby function
•
If no signal is received and no operation is performed in TV mode for
30 minutes, the TV will automatically go to standby mode.
■ Keep the TV away from these types of equipment
•
Electronic equipment
In particular, do not place video equipment near the TV
(electromagnetic interference may distort images / sound).
•
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect operation of other
equipment).
■ Transport only in upright position
■ Adjust the LCD panel to your desired angle
•
Ensure that the pedestal does not hang over the edge of the base
even if the TV swivels to the full rotation range.
•
Do not place any objects or hands within the full rotation range.
Mains plug
Allow suffi cient space
around the TV for
radiated heat
Minimum distance
10
10
10 10
(cm)
•
When using the pedestal, keep the
space between the bottom of the
TV and the fl oor surface.
•
In case of using Wall-hanging
bracket, follow the manual of it.
Do not expose to rain
or excessive moisture
•
To prevent damage which might
result in electric shock or fi re, do not
expose this TV to rain or excessive
moisture.
This TV must not be exposed to
dripping or splashing water and
objects fi lled with liquid, such as
vases, must not be placed on top of
or above the TV.
Do not block the rear
ventilation openings
•
Ventilation should not be impeded
by covering the ventilation openings
with items such as newspapers,
tablecloths and curtains.
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and
dust may lead to fi re or electrical shock.)
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with
clean water or diluted neutral detergent (1 part detergent to 100 parts water).
Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Caution
•
The surface of the display panel has been specially treated and may be
easily damaged.
Do not tap or scratch the surface with your fi ngernail or other hard object.
•
Take care not to subject the surface to insect repellent, solvent, thinner,
or other volatile substances (this may degrade surface quality).
Cabinet, Pedestal
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water
containing a small amount of neutral detergent. Then, wring the cloth and
wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
•
Take care not to subject the TV’s surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
•
Take care not to subject surfaces to insect repellent, solvent, thinner, or
other volatile substances (this may deteriorate the surface by peeling
the paint).
•
Do not allow the cabinet and pedestal to make contact with a rubber or
PVC substance for a long time.
6
Accessories / Options
•
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
Installing remote’s batteries
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or breakup batteries.
Batteries must not be exposed to
excessive heat such as sunshine, fi re or
the like.
Standard accessories
Check that you have the accessories and items shown
Remote Control
•
N2QAYB000241
TV
Batteries for the
Remote Control (2)
•
R6 (UM3)
Clamper Cleaning cloth
Operating Instructions Pan European Guarantee Card
Optional accessories
Wall-hanging bracket
•
TY-WK32LR2W
WARNING!
•
Failure to use a Panasonic bracket or choosing to mount the
unit yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer
mount your unit will void your warranty.
•
Always be sure to ask a qualifi ed technician to carry out set-up.
Incorrect fi tting may cause equipment to fall, resulting in injury
and product damage.
•
Do not mount the unit directly below ceiling lights (such as
spotlights, fl oodlights or halogen lights) which typically give off
high heat. Doing so may warp or damage plastic cabinet parts.
•
Take care when fi xing wall brackets to the wall. Always ensure
that there are no electrical cables or pipes in the wall before
hanging bracket.
centre
150 mm
150 mm
50 mm
50 mm
150 mm
50 mm
■ How to remove the Pedestal
Remove four screws.
•
TX-32LZ85L
•
TX-37LZ85L
Rear of the TV
Please contact your nearest Panasonic dealer to purchase the
recommended wall-hanging bracket. For additional details, please
refer to the wall-hanging bracket installation manual.
Holes for wall-hanging bracket
installation
Please note the holes for
TX-32LZ85L are off-centred
to the left by 50 mm, as
shown on the diagram.
Using the clamper
To tighten:
Keep the
knob pressed
Rear of the TV
To loosen:
•
Do not bundle the RF cable and mains lead together (could cause
distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option’s assembly
manual to fi x cables.
7
Quick Start Guide
OPTION
SD CARD
EXIT
ASPECT
RETURN
INPUT
DIRECT TV REC
F.P.
N
Cursor buttons
•
Makes selections and adjustments
Standby On / Off switch
•
Switches TV On or Off standby
Sound Mute
•
Switches sound mute On or Off
Surround (p. 20)
•
Switches Surround sound
Programme Up / Down
•
Selects programme in sequence
Teletext (p. 14)
•
Switches to teletext mode
OK
•
Confi rms selections and choices
•
Press after selecting programme positions
to quickly change programme
VCR / DVD Panasonic equipment
operations (p. 17)
Volume Up / Down
Programme Information (p. 13)
•
Displays programme information
Index (p. 15)
•
Returns to the teletext index page
(teletext mode)
Coloured buttons
•
Used for the selection, navigation and
operation of various functions
Exit
•
Returns to the normal viewing screen
Direct TV Recording (p. 33 and p. 35)
•
Records programme immediately in
DVD Recorder / VCR with Q-Link or
VIERA Link connection
Numeric buttons
•
Changes programme and teletext pages
•
When in Standby mode, switches TV On
VIERA Link Menu (p. 35)
•
Press to access VIERA Link Menu directly
Aspect (p. 13)
•
Changes aspect ratio from Aspect Selection list
•
Also possible by pressing this button
repeatedly until you reach the desired aspect
Option Menu (p. 12)
•
Easy setting for viewing and sound options
Main Menu (p. 18)
•
Press to access VIERA Link, Picture,
Sound and Setup Menus
Favourite Page (p. 15)
•
Calls up the teletext page stored in blue button
Input mode selection
•
TV - switches to TV mode (p. 16)
•
AV - switches to AV input mode from Input
Selection list (p. 16)
SD Card (p. 30)
•
Switches to SD Card viewing mode
Return
•
Returns to the previous menu
Hold
•
Freeze / unfreeze picture (p. 12)
•
Holds the current teletext page (teletext
mode) (p. 15)
Normalize (p. 18)
•
Resets picture and sound settings to their
default levels
TV
Remote Control
•
Identifying Controls
•
Accessories / Options
Identifying Controls
C.A.T.S. (Contrast Automatic Tracking System) sensor
•
Senses brightness to adjust picture quality in “Eco” mode in Picture Menu (p. 20)
Mains power On / Off switch
•
Switch On to turn on the TV
or turn the TV to standby mode
by the remote control
Remote control signal receiver
Increases or decreases the programme
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When
in Standby mode, switches TV On.
Function select
•
Volume / Contrast / Brightness / Colour / Sharpness /
Tint (NTSC mode) / Bass / Treble / Balance / Auto Setup (p. 25)
SD Card slot (p. 31)
Power LED
•
Standby: red
On: green
•
When using the remote control, indicates
the TV has received a command.
Swing door to open
Changes the
input mode
HDMI3
terminal (p. 38)
Headphones jack (p. 38)
AV3 terminals
(p. 38)
8
AV2AV1
PC
COMPONENT
AUDIO
IN
AUDIO
OUT
DIGITAL
AUDIO
OUT
Y
P
B
P
R
LRL
R
RGB
VIDEO
RGB
AV1
AV2
VIDEO
S VIDEO
AV2AV1
PC
COMPONENT
AUDIO
IN
AUDIO
OUT
DIGITAL
AUDIO
OUT
Y
P
B
P
R
LRL
R
RGB
VIDEO
RGB
AV1
AV2
VIDEO
S VIDEO
RF OUT
RF IN
Rear of the TV Rear of the TV
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
TV only TV, DVD Recorder or VCR
Note
•
Connect to AV1 / AV2 for a DVD Recorder / VCR supporting Q-Link (p. 33).
•
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3) by using
HDMI cable (p. 38).
•
Q-Link connection p. 32
•
VIERA Link connection p. 32
•
Read the manual of the equipment too.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
Basic Connection
Mains lead
Mains lead
SCART cable
(fully wired)
DVD Recorder or VCR
RF cable
Aerial Aerial
RF cable
RF cable
AC 220-240 V
50 / 60 Hz
AC 220-240 V
50 / 60 Hz
9
Quick Start Guide
AV2AV1
PC
COMPONENT
AUDIO
IN
AUDIO
OUT
DIGITAL
AUDIO
OUT
Y
P
B
P
R
LRL
R
RGB
VIDEO
RGB
AV1
AV2
VIDEO
S VIDEO
RF OUT
RF IN
RF IN
RF OUT
RF IN
•
Basic Connection
Rear of the TV
TV, DVD Recorder / VCR and Set top box
Example 3
Connecting DVD Recorder / VCR and Set top box
DVD Recorder
or VCR
Aerial
Mains lead
Set top box
AC 220-240 V
50 / 60 Hz
RF cable
RF cable
SCART cable
(fully wired)
SCART cable
(fully wired)
RF cable
RF cable
Fully wired HDMI
compliant cable
10
OPTION
SD CARD
INPUT
EXIT
RETURN
TV
Auto Setup
This will take about 3 minutes.
EXIT
RETURN
CH 29
Channel Service Name
CH 33
Analogue: 2
Searching
Scan 2 99 21 41
Sending Preset Data
Please wait!
Remote control unavailable
0% 100%
Country
Portugal
Spain
Italy
France
Austria
Germany
Switzerland
Hungary
Czech
E.Eu
Ireland
Poland
Netherlands
Belgium
Finland
Norway
Sweden
Denmark
Greece
OSD Language
Nederlands
Português
Español
Italiano
Français
English
Deutsch
Latviešu
Slovenščina
Hrvatski
Lietuvių
eesti keel
Srpski
Românǎ
Български
Slovenčina
Magyar
čeština
Polski
Еλληνικά
Türkçe
Suomi
Norsk
Svenska
Dansk
Please select your viewing environment.
Home Shop
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
Auto Setup
Auto Setup is now complete and your TV is ready for viewing.
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
•
To edit programmes
“Editing Programmes” (p. 22)
4
Start Auto Setup
•
If Q-Link, VIERA Link or similar
technology (p. 32), compatible
recorder is connected, programme,
language, country / region settings
are automatically downloaded to
the recorder.
•
Auto Setup will start to search for
TV programmes and store them.
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
3
Select your country
select
2
Select the language
select
store
•
“Shop” and “Home” are equal
to “Dynamic” and “Normal”
respectively - “Viewing Mode” in
“Picture Menu” (p. 20)
5
Select the picture setting
select
set
Search and store TV programmes automatically.
These steps are not necessary if the setup has been completed by your local dealer.
•
Depending on the selected
countries, you may also be
required to select the region.
11
Quick Start Guide
Select
EXIT
Change
RETURN
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
Speaker Distance to Wall
Over 30cm
MPX Stereo
Sound Menu 1/2
Page up
Page down
On-screen operation guide
will help you.
•
Auto Setup
■ ON SCREEN HELP Instructions box
(example: Sound Menu)
Many features available on this TV can be accessed via the On Screen Display
menu.
■ How to use remote control
Using the
On Screen
Displays
MENU
Open the main menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the normal viewing screen
Note
•
If tuning has failed “Auto Setup” (p. 25)
•
If downloading has failed “Download” (p. 21)
•
To initialize all settings “Shipping Condition” (p. 27)
•
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
12
SD CARD
RETURN
INPUT
MULTI WINDOW
OPTION
EXIT
ASPECT
1 BBS
CH05 SC1 Coronation Street
All Services
BBCi
6
7
8
1
2
3
4
Select
Connect
EXIT
RETURN
Page up
Page down
Watching TV
■ Select a programme using Information banner (p. 13)
Possible to confi rm the programme name before selecting programmes.
Select a programme
up
Volume
2
Information banner appears
whenever you select a
programme
•
For details p. 13
Turn power on
(Press for about 1 second)
•
Mains power On / Off switch should be On. (p. 7)
down
or
1
•
To select the two or three-digit
programme number, e.g. 39
(in a short time)
Display Information banner
if it is not displayed
While the banner is displayed,
select the programme
•
Possible to set display
timeout in “Banner Display
Timeout” (p. 21).
Freeze / unfreeze picture
Hold
■ Other useful functions
Display the
selectable
settings for
the current
programme
O
PTION
Check or change the current
programme status instantly
•
To change
Teletext Character Set
Sets the teletext language
Setup Menu (p. 21)
MPX
Sound Menu (p. 20)
Volume Correction
Adjusts volume of individual programme or
input mode
Note
•
Also possible to change the settings in Menu list (p. 20 and p. 21).
select
change
select programme
watch
•
To select from the Programme List
select
programme
watch
Off Timer
Main Menu
VIERA Link
Picture
Sound
Setup
1/2
Service List Edit
Link Settings
Child Lock
Tuning Menu
Off Timer
OSD Language
Teletext TOP
Teletext Character Set West
Shipping Condition
Setup Menu
Off
MENU
Display the
menu
Select “Setup”
access
select
Select “Off Timer” and set the time
•
To cancel Set to “Off” or turn the TV off.
•
To display the remaining time Information banner (p. 13)
•
When the remaining time is within 3 minutes, the remaining time will fl ash on screen.
Turn the TV off automatically after a fi xed period
set
select
13
Viewing
•
Watching TV
■ Other useful functions
Display
Information
banner
Sound mute On
Teletext service available
Stereo, Mono
Audio mode
1 - 90
Off Timer remaining time
•
For settings p. 12
Display Information banner
•
Also appears when changing a programme
1 BBS
CH05 SC1 PAL
45Stereo
Coronation Street
Programme
Example:
Features available / Message meanings
•
To con fi rm another tuned
programme name
•
To watch the programme
listed in the banner
•
To hide
EXIT
•
To set display timeout
“Banner Display Timeout” (p. 21)
•
Event information is referred to teletext
signal.
Event
Sound System Colour System
Change
aspect
ratio
Auto 16:9
The best ratio is chosen and
the picture expanded to fi ll the
screen.
For details p. 40
Directly displays the image
at “16:9” without distortion
(anamorphic).
14:9 Just
Displays the image at the
standard “14:9” without
distortion.
Displays a “4:3” image
full-screen.
Stretching is only noticeable
at the left and right edges.
4:3 4:3 Full
Displays the image at the
standard “4:3” without
distortion.
Displays a “4:3” image
enlarged horizontally to fi t the
screen.
•
HD signal only
Zoom1 Zoom2
Displays a “16:9” letterbox or
“4:3” image without distortion.
Displays a “16:9” letterbox
(anamorphic) image
full-screen without distortion.
Zoom3
Displays a “2.35:1” letterbox (anamorphic)
image full-screen without distortion. At “16:9”,
displays the image at its maximum
(with slight enlargement).
Select
Change
EXIT
RETURN
Aspect selection
16:9
Just
14:9
4:3 Full
4:3
Zoom1
Zoom2
Zoom3
Auto
A
SPECT
Change the aspect ratio
Enjoy viewing the picture at its optimum size and aspect.
Aspect
Selection list
•
To change the mode using the ASPECT button only
A
SPECT
(Press repeatedly until you reach the desired mode)
Display Aspect
Selection list
A
SPECT
While the list is displayed,
select the mode
Note
•
Only “16:9” and “4:3” are available in PC mode.
•
Not available in teletext mode.
•
Aspect mode can be memorized separately for SD (Standard defi nition) and HD (High
defi nition) signals.
store
select
14
INPUT
OPTION
SD CARD
EXIT
RETURN
ASPECT
MULTI WINDOW
F.P.
<< 01 02 03 04 05 06 07 >>
TELETEXT
INFORMATION
17:51 28 Feb
MENU
MENU
red
green
Viewing Teletext
Switch to Teletext
1
Select the page
or
or
•
Displays Index
(content varies
depending on the
broadcasters)
Time / date
Current
page
number
Sub page number
Colour bar
■ To adjust contrast
MENU
(Press three times)
■ To return to TV
■ Using teletext conveniently
2
FULL /
TOP /
BOTTOM
Reveal
hidden
data
■ Re-hide
red
Reveal hidden words e.g. quiz page answers
(TOP) (BOTTOM)
(Expand the BOTTOM half)
Normal (FULL)
(Expand the TOP half)
As the blue bar is displayed
You can enjoy teletext broadcasting, including news, weather forecasts and subtitles, if this service is
provided by the broadcasters.
What is FLOF (FASTEXT) mode?
In FLOF mode, four differently coloured subjects are situated at the bottom of the screen. To access more
information about one of these subjects, press the appropriately coloured button. This facility enables fast access to
information on the subjects shown.
What is TOP mode? (in case of TOP text broadcasting)
TOP is a particular improvement of the standard teletext service that results in an easier search and effective guide.
•
Fast overview of the teletext information available
•
Easy to use step-by-step selection of the topical subject
•
Page status information at the bottom of the screen
Available page up / down
red
green
To select among subject blocks
blue
To select next subject within the subject block
(After the last subject, it moves to the next subject block.)
yellow
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these
numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”, p. 15)
■ To change mode “Teletext” in Setup Menu (p. 21)
up
down
red green yellow blue
(Corresponds to the colour bar)
15
Viewing
•
Viewing Teletext
INDEX
Return to the main index page
Stop automatic updating
(If you wish to hold the current page without updating)
■ To resume
HOLD
View in
multi
window
Watch TV and Teletext in two windows at once
MENU
•
Operations can be made only in Teletext screen.
(Press twice)
•
Select Picture and text
On or Off
Call up a
favourite
page
F. P.
•
Call up the page stored in “blue”.
•
Factory setting is “P103”.
View a favourite page stored
Store
frequently
viewed
pages
Store frequently viewed pages in the colour bar
(List mode only)
press
and
hold
As page is
displayed
The number changes to white.
Corresponding
colour button
■ To change stored pages
press
and
hold
Enter new page number
Colour button you
want to change
View sub
page
•
Sub pages:
The number of sub pages varies depending on the broadcasters (up to 79 pages).
It may take some time for searching, during which time you can watch TV.
Enter the
4-digit number
example: P6
Appears at top of
the screen
■ To view specifi c sub page
MENU
blue
View sub page (Only when teletext is more than one page)
Watch
TV while
waiting
for update
P108
MENU
yellow yellow
Appears
when
updating is
completed
(You cannot change the programme.)
•
The news page provides a function that indicates arrival of latest news (“News Flash”).
Changes to TV screen temporarily
View the
updated
page
View the TV picture while searching for a teletext page
Teletext automatically updates itself when new information becomes available.
Loading...