Panasonic Viera TX-37LZ800A Operating Instructions Manual
TQB4GC0009
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
English
Model No.
TX-37LZ800A
Operating Instructions
LCD TV
2
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
3
Viewing Advanced FAQs, etc.Quick Start Guide
media excitement
Enjoy rich multi-media
Camcorder
Amplifi er with
Speaker system
VCR
DVD player
DVD Recorder
Personal
computer
Set top box
Contents
•
Safety Precautions ······································ 4
(Warning / Caution)
•
Notes ··························································· 5
•
Maintenance ··············································· 5
Be Sure to Read
Advanced Features
•
How to Use Menu Functions ····················· 18
(picture, sound quality, etc.)
•
Editing Programmes
··································· 22
•
Tuning Programmes
··································· 24
•
Control Programme Audience ···················26
•
Restore Settings ······································ 27
•
Input Labels ·············································· 28
•
Displaying PC Screen on TV ····················· 29
•
Viewing from SD Card (Photos) ················ 30
•
VIERA Link “HDAVI ControlTM” ··················· 32
•
External Equipment ··································· 36
Basic Features
•
Watching TV ·············································· 12
•
Watching Videos and DVDs ······················ 14
•
Viewing Teletext ········································ 16
Enjoy your TV!
•
Technical Information ································ 38
•
FAQs ·························································43
•
Licence ······················································ 45
•
WARRANTY ·············································· 45
•
Specifi cations ············································ 46
FAQs, etc.
Accessories / Options
·········· 6
Identifying Controls
··············· 7
Basic Connection
··················· 8
Auto Tuning
······························· 9
Language Setting
················· 10
Quick Start Guide
SD memory card
4
Safety Precautions
If you fi nd any
abnormality,
remove the
mains plug immediately!
Keep liquids away from the TV
To prevent damage which may result in fi re or
shock hazard, do not expose this appliance to
dripping or splashing.
Do not place containers with water (fl ower vase,
cups, cosmetics, etc.) above the TV. (including on
shelves above, etc.)
Do not remove covers
NEVER modify the TV yourself
(High-voltage components may cause serious
electrical shock.)
Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
AC 230 V
50 Hz
Do not place foreign objects
inside the TV
Do not let metal or fl ammable objects drop into the
TV through the air vents (fi re or electrical shock
may result).
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fi re.)
Ensure that the mains plug is easily accessible.
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fi re or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet.
Do not place a heavy object on the lead or place the lead near a high-temperature object.
Do not twist the lead, bend it excessively, or stretch it.
Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.
Do not use a damaged mains plug or socket outlet.
Warning
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fi re never place any
type of candle or naked fl ame on top or near the TV.
Do not allow children to
handle SD card
As with a small object, SD card can be swallowed
by young children. Please remove SD card
immediately after use.
Do not place the TV on sloped
or unstable surfaces
The TV may fall off or tip over.
Use only the dedicated stands
/ mounting equipment
Using an unauthorized stand or other fi xtures may
make the TV shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
Power source
This TV is designed to operate on 230 V, 50 Hz
AC.
5
(Cleaning an energized TV may cause electrical shock.)
When cleaning the TV, remove the
mains plug
Caution
Notes
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
Maintenance
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or diluted neutral
detergent by 100 times of water. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Caution
•
The surface of the display panel has been specially treated and may be easily damaged.
Do not tap or scratch the surface with your fi ngernail or other hard object.
•
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances
(this may degrade surface quality).
Cabinet
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Caution
•
Use care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
•
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
•
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
Blocked ventilation by curtains, etc. may
cause overheating, fi re or electrical shock.
Do not block the rear air vents
When TV will not be used for a
long time, remove the mains plug
This TV will still consume some power even
in the Off mode, as long as the mains plug is
still connected to a live socket outlet.
Electronic equipment
In particular, do not place video equipment near the
TV (electromagnetic interference may distort images
/ sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Keep the TV away from these equipment
Adjust the LCD panel to your desired angle
Ensure that the pedestal does not hang over the
edge of the base even if the TV swivels to the full
rotation range.
Do not place any objects or hands within the full
rotation range.
15° 15°
b
a
(View from the top)
If no signal is received and no operation is
performed in TV mode for 30 minutes, the TV will
automatically go to standby mode.
Auto power standby function
Transport only in upright position
Irreversible damage can be caused.
Do not expose your ears to excessive
volume from the headphones
When using the pedestal, keep the space between
the bottom of the TV and the fl oor surface.
In case of using Wall-hanging bracket, follow the manual of it.
a: 464 mm / b: 381 mm
Set the mark at the centre as illustrated,
to have the swivel positioned at the
centre of the rotation angle.
Allow suffi cient space around the
TV for radiated heat
10
10
10
10
(cm)
Minimum distance
6
TV
VOLCH
Accessories / Options
Batteries for the Remote
Control Transmitter
(2)
•
R6 (AA)
Remote Control
Transmitter
•
N2QAYB000120
Standard accessories
Check that you have the accessories and items shown
Installing remote’s batteries
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
Caution
•
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fi re or the like.
Optional accessories
Wall-hanging
bracket
TY-WK32LR2W
WARNING!
•
Failure to use a Panasonic bracket or choosing to mount the unit
yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount
your unit will void your warranty.
•
Always be sure to ask a qualifi ed technician to carry out set-up.
Incorrect fi tting may cause equipment to fall, resulting in injury and
product damage.
•
Do not mount the unit directly below ceiling lights (such as
spotlights, fl oodlights or halogen lights) which typically give off high
heat. Doing so may warp or damage plastic cabinet parts.
How to remove the TV Stand
Remove four screws.
Rear of the TV
Please contact your nearest Panasonic dealer to purchase the
recommended wall-hanging bracket. For additional details, please
refer to the wall-hanging bracket installation manual.
Operating Instructions
Cleaning cloth
7
Quick Start Guide
OPTION
MULTI PIP
POWER
SD CARD
EXIT
ASPECT
RETURN
INPUT
SURROUND
REC
POWER
RECALL MUTE
CH VOL
F.P.
GRYB
S
VIDEO
VIDEO
AUDIO
AV IN
3
AV4 I N
L
R
Changes the
input mode
Identifying Controls
•
Identifying Controls
•
Accessories / Options
Cursor buttons to make selections and
adjustments
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Multi window (p. 13)
Selects programmes in sequence
When in Standby mode, switches TV On.
Teletext (p. 16)
OK button to confi rm selections and choices
Press after selecting programme positions to
quickly change programme.
VCR / DVD operations (p. 15)
Volume
Programme Information
(p. 13)
Teletext Index (p. 17)
Coloured buttons used for the
selection, navigation and operation of
various functions
EXIT (Returns to TV screen)
Surround (p. 20)
Programme / channel change buttons (0-9)
and Teletext page buttons.
(p. 12 and p. 16)
When in Standby mode, switches TV On.
Access VIERA Link Menu (p. 33)
Changes aspect ratio (p. 13)
Option menu
Sets the preferred settings of viewing
and sound options easily (p. 12)
Main Menu (p. 18)
Press to access VIERA Link, Picture, Sound
and Setup menus
Viewing a favourite teletext channel (p. 17)
Stereo / Bilingual Sound Selection (p. 40)
Changes the input mode
TV -
changes TV mode
(p. 14)
AV - changes AV input mode (p. 14)
Viewing SD Card (p. 30)
Returns to the previous menu
Still picture (p. 12)
Teletext Hold (p. 17)
C.A.T.S. (Contrast Automatic Tracking
System) sensor
•
Senses brightness to adjust picture quality in
“Eco” mode in Picture Menu (p. 20)
Mains power On / Off switch
•
Switch On to turn on the TV or
turn the TV to standby mode by
the remote control
Increases or decreases the
programme position by one. When a
function is already displayed, press
to increase or decrease the selected
function. When in Standby mode,
switches TV On.
Function select
•
Volume / Contrast / Brightness / Colour / Sharpness /
Tint (NTSC mode) / Bass / Treble / Balance / Auto Tuning (p. 25)
SD Card slot (p. 31)
Headphones
jack (p. 36)
Power LED
•
Standby: red
On: green
•
When using the remote control, indicates the TV has received a command.
Swing door
to open
AV4 terminals
(p. 36)
Remote control
signal receiver
8
RF IN
RF OUT
AUDIO
OUT
VIDEO
OUT
Basic Connection
Mains lead
Mains lead
DVD Recorder or VCR
RF
cable
Aerial AerialRear of the TV Rear of the TV
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
RF cable
RF cable
TV only TV, DVD Recorder or VCR
AC 230 V,
50 Hz
Note
•
Do not put the Coaxial cable close to the mains lead to avoid noise.
•
Do not place the Coaxial cable under the TV.
•
To obtain optimum quality picture and sound, an Aerial, the correct cable (75 Ω coaxial) and the correct
terminating plug are required.
•
If a communal Aerial system is used, you may require the correct connection cable and plug between the wall
Aerial socket and the TV.
•
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct Aerial system for
your particular area and the accessories required.
•
Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.
AC 230 V,
50 Hz
9
Quick Start Guide
OPTION
SD CARD
INPUT
EXIT
RETURN
TV
POWER
Auto Tuning
2
Scan 1 120
CH4
EXIT
RETURN
Please select your viewing environment.
Home Shop
Chinese
OSD Language
English Français
Channel Plan
Asia/M.East
Hong Kong
China
NZ/Indonesia
CATV/Other
Channel Plan - CATV/Other -
South Africa
CIS/E.Europe
Indian CATV
Japan
American CATV
American System
Start Auto Tuning
•
Auto Tuning
•
Basic Connection
Plug the TV into mains socket and switch On
1
Auto Tuning
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
Auto Tuning is now complete and your TV is ready for viewing.
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
•
To edit programmes
Editing Programmes (p. 22)
Note
•
If tuning have failed “Auto Tuning” (p. 25).
•
To initialize all settings “Shipping Condition” (p. 27)
•
If you turned the TV Off during Standby mode last time, the TV will be in Standby
mode when you turn the TV On with Mains power On / Off switch.
4
•
Auto Tuning will start to
search for TV programmes
and store them.
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
2
Select your language
select
•
“Shop” and “Home” are equal
to “Dynamic” and “Standard”
respectively - “Menu” in
“Picture Menu” (p. 20)
5
Select the picture setting
select
set
3
Select your area
store
select
()
•
CATV/Other :
Press displayed
sub menu
10
RECALL MUTE
POWER
INPUT
OPTION
MULTI PIP
SD CARD
ASPECT
GRYB
F.P.
CH VOL
TV
EXIT
RETURN
Main Menu
VIERA Link
Picture
Setup
Sound
Chinese
OSD Language
English Français
Access
1/2
Service List Edit
Child Lock
Tuning Menu
Off Timer Off
OSD Language
Teletext TOP
Access
Teletext Character Set
Shipping Condition
Input Labels
Setup Menu
English
Access
Language Setting
You can change language for on-screen displays.
1
Display the menu
2
Select “Setup”
4
Select the language
access
select
store
change
3
Select “OSD Language”
access
select
11
Quick Start Guide
EXIT
RETURN
Select
EXIT
Change
RETURN
Menu Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
Speaker Distance to Wall
Over 30cm
Reset to Default
Sound Menu
Set
11
12
12
(example: Sound Menu)
■
ON SCREEN HELP Instructions box
Open the main menu
Return to the previous menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
Many features available on this TV can be accessed via the On Screen Display
menu.
■
How to use remote control
•
Language Setting
Using the
On Screen
Displays
Exit the menu system and return to the normal viewing screen
On-screen operation
guide will help you.
12
INPUT
SD CARD
RETURN
F.P.
MUTE
OPTION
MULTI PIP
POWER
EXIT
ASPECT
CH VOL
GRYB
RECALL
STTL
Bad Signal Encrypted
AD TXT Stereo 45
1 BBS
CH05 5.5MHz PAL Corontation Street
POWER
CH
RECALL
Watching TV
Select a programme
up
Volume
2
Turn power on
•
Mains power On / Off switch should be On. (p. 7)
•
If “Shop” is displayed on the top right of the screen,
reset settings in “Shipping Condition” (p. 27), and
select “Home” in “Auto Tuning” (p. 9).
down
or
1
Information banner appears
whenever you select a
programme
•
For details p. 13
•
To select the two or three-digit
programme number, e.g. 39
(in a short time)
■
Select a programme using Information banner (p. 13)
Possible to confi rm the programme name before selecting programmes.
Display Information banner
if it is not displayed
While the banner is displayed,
select the programme
•
Possible to set display
timeout in “Banner Display
Timeout” (p. 21).
select programme
watch
Freeze / unfreeze picture
Hold
■
Other useful functions
Display the
selectable
settings for
the current
programme
O
PTION
Check or change the current
programme status instantly
•
To change
CH Colour Set
Adjusts the colour density
Picture Menu (p. 20)
Teletext Character Set
Sets the teletext language
Setup Menu (p. 21)
Volume Correction
Adjusts volume of individual programme or
input mode
Note
•
Also possible to change the settings in Menu list (p. 20 and p. 21).
select
change
Off Timer
Main Menu
VIERA Link
Picture
Setup
Sound
1/2
Service List Edit
Child Lock
Tuning Menu
Off Timer
OSD Language
Teletext TOP
Teletext Character Set
Shipping Condition
Input Labels
Setup Menu
Off
English
Display the
menu
Select “Setup”
access
select
Select “Off Timer” and set the time
•
To cancel Set to “Off” or turn the TV off.
•
To display the remaining time Information banner (p. 13)
•
When the remaining time is within 3 minutes, the remaining time will fl ash on screen.
Turn the TV off automatically after a fi xed period
set
select
13
Viewing
•
Watching TV
Watch TV,
DVD, etc.
in multi
window
DVD
Focus PAP Change
AV1
AV1
Focus PAP Change
DVD
AV1DVD
Focus PIP Change
MULTI PIP
B
Y
View in multi window (p. 40)
Main screen
Colour bar
Sub screen
•
To exit multi window (return to the single-screen view with main screen)
MULTI PIP
•
To change the layout, images, fi rst show the colour bar
RECALL
To change the layout G
Y
To swap
B
To change the focus to sub window
R
To change the input mode of sub screen
•
Remote control operations
apply to the main screen.
Enjoy viewing two images at once, such as a TV programme and a DVD.
Picture-in-Picture mode (PIP)
Picture-and-Picture mode (PAP)
G
Operations in multi window
Swap sub screen
for main screen
Change the input mode by the
remote control (p. 14)
Swap again
B
B
■
Other useful functions
Change
aspect
ratio
A
SPECT
Change the aspect ratio (p. 39)
Enjoy viewing the picture at its optimum size and aspect.
•
To change the mode
•
To change the mode using the ASPECT button only
A
SPECT
(Press repeatedly until you reach the desired mode)
Display Aspect
Selection list
A
SPECT
During the list is displayed,
select the mode
Select
Change
EXIT
RETURN
Aspect Selection
16:9
Just
4:3 Full
4:3
Zoom1
Zoom2
Zoom3
Aspect Selection list
select
store
Note
•
Only “16:9” and “4:3” are available in PC mode.
•
Aspect mode can be memorized separately for each input mode.
Display
information
banner
STTL
Bad Signal Encrypted
AD TXT Stereo
1 BBS
45
CH05 5.5MHz PAL Corontation Street
RECALL
Display programme information
•
To set display timeout
“Banner Display Timeout” (p. 21)
•
Appears also when changing programme.
•
Programme information is referred to
teletext signal.
•
To select another programme
•
To hide
EXIT
Programme
Stereo sound
Off timer
Features available
Sound mute
Sound system
Colour system
Teletext
Programme
14
OPTION
MULTI PIP
SD CARD
EXIT
ASPECT
RETURN
GRYB
F.P.
RECALL MUTE
VOL
SURROUND
CH
POWER
INPUT
REC
POWER
Watching Videos and DVDs
1
2
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
To connect the equipment (p. 8)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Select the input mode connected to the equipment
Note
•
If the external equipment has an aspect adjustment function, set to “16:9”.
•
For details, see the manual of the equipment or ask your local dealer.
■
To return to TV
Display the Input select menu
Displays the selected mode
•
You can also select the input using the AV button on the remote
control or the top panel of the TV.
Press the button repeatedly until the desired input is selected.
•
You can label or skip each input modes “Input Labels” (p. 28)
Input Selection
AV1
AV2
AV3
AV4
PC
HDMI1
HDMI3
HDMI2
TV
3
View
select
watch
15
Viewing
•
Watching Videos and DVDs
VCR / DVD switch
∗
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
POWER
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
Panasonic equipment connected to the TV can be directly operated with the remote control.
Note
•
Confi rm if the remote control works correctly after changing the code.
•
The codes will be reset to default values if batteries are replaced.
•
“DVD” means DVD player, DVD recorders and Recorder home theatre.
•
Some operations may not be possible on some equipment models.
∗
Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position
Press and hold
POWER
during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below
Press
“VCR” position
Equipment Code
VCR 10 (default)
DVD 11
“DVD” position
Equipment Code
DVD 70 (default)
Player home theatre
71
Loading...