Panasonic Viera TX-26LXD60A, Viera TX-32LXD60A Operating Instructions Manual

IDTV
REC
VCR DVD
VCR
TEXT
N
MODE
TV/AVGUIDE
STTL INDEX HOLD
123
456
789
C
0
PROGRAMME
DIRECT TV REC
DVB
Analogue
ASPECT
MENU
OK
Operating Instructions
Digital LCD Television
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
U.K. Standard
Model No. TX-26LXD60A
TX-32LXD60A
2
Turn your living room into a home theatre!
Experience an amazing level of multi-media excitement
Receive terrestrial digital services using an integrated (Digital Video Broadcasting) tuner
(Display DVB programmes with TV Guide (p. 12) / Timer recording (p. 34) / Register and instantly call up favourite programmes with Profi le Edit (p. 26))
Sharp pictures with HDMI terminal Control DVD recorder / VCR via TV with Q-Link connection
(p. 36)
Create DVD recorder link-ups with "Control with HDMI" without complicated settings!
3
Viewing Advanced FAQs, etc.Quick Start Guide
Contents
Safety Precautions ······································ 4
(Warning & Caution)
Notes ··························································· 5
Maintenance················································ 5
Be Sure to Read
Basic Features
Watching TV ·············································· 11
Using TV Guide (DVB) ······························ 12
Viewing Teletext ········································14
Watching VCR, DVD and Satellites ··········17
Advanced Features
How to Use Menu Functions ····················· 18
(picture, sound quality, etc.)
DVB Settings (DVB) ·································· 24
(pay-TV, subtitles, etc.)
Profi le Edit / Child Lock (DVB) ·················· 26
DVB Tuning Menu (DVB) ·························· 28
Common Interface Module (DVB) ············· 29
Editing and Setting Channels (Analogue)
···· 30
Restore Settings········································ 32
Owner ID ··················································· 33
Recording Controls ···································34
Q-Link Functions ······································· 36
HDMI Functions ········································37
External Equipment ··································· 40
Enjoy your TV!
Technical Information ································42
FAQs ·························································44
On screen messages ································ 46
Index ························································· 47
Specifi cations ············································ 47
Licence ······················································ 48
FAQs, etc.
Accessories/Options
············ 6
Identifying Controls
·············· 7
Basic Connection
·················· 8
Auto Setup
······························ 10
Enjoy rich multi-media
Camcorder
VCR
DVD player
DVD recorder
Satellite receiver
Quick Start Guide
4
Safety Precautions
AC 220-240 V 50 Hz
Warnings & Precautions
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the mains plug which is marked with the letter E or by the Earth symbol
or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal in the mains plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the mains plug which is marked with the letter L or coloured RED. How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your mains plug, proceed as follows.
WARNING: – THIS APPARATUS MUST BE EARTHED. IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Green-and-Yellow: Earth Blue: Neutral Brown: Live
If a new mains plug is to be fi tted, please observe the wiring code as shown below. If in any doubt, please consult a qualifi ed electrician.
If the fi tted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock if the cut off mains plug is inserted into any 13 amp socket.
If the mains plug contains a removable fuse cover, you must ensure that it is refi tted when the fuse is replaced. If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained. A replacement fuse cover may be purchased from your local Panasonic Dealer.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fi tted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark on the body of the fuse.
Handling the mains plug
Ensure that the mains plug is easily accessible at all times. The On/Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket when the TV set is not used for a prolonged period of time. Remove the mains plug from the wall socket before connecting or disconnecting any leads.
Note
If the set is not switched off when the TV station stops transmitting, it will automatically go to standby mode after 30 minutes. This function will operate only in Analogue TV model.
Do not expose to direct sunlight and other sources of heat
Avoid exposing the TV set to direct sunlight and other sources of heat. To prevent fi re never place any type of candle or naked fl ame on top or near the TV set.
Power source
This TV set is designed to operate on 220-240V, 50 Hz AC.
5
Do not remove the cover
Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.
Do not expose to rain or excessive moisture
To prevent damage which might result in electric shock or fi re, do not expose this TV set to rain or excessive moisture.
This TV must not be exposed to dripping or
splashing water and objects fi lled with liquid, such as vases, must not be placed on top of or above the TV.
Do not block the rear ventilation openings
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains.
Cabinet and display panel care
Remove the mains plug from the wall socket.
The cabinet and display panel can be cleaned
with a soft cloth moistened with mild detergent and water. Do not use solutions containing benzol or petroleum.
TV sets can produce static electricity, care must
be taken whenever touching the TV screen.
Use only the dedicated stands / mounting equipment
Using an unauthorized stand or other fi xtures may make the unit unstable, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use optional stands / mounts (p. 6).
Do not place the TV on sloped or unstable surfaces
The TV may fall off or tip over.
Display panel
Cabinet
Mains plug
Daily care:
Gently wipe the surface clean of dirt by using a soft cloth. Detail: Wipe the surface clean using a soft cloth dampened with clean water or water containing a small amount of neutral detergent. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Daily care: Wipe the surface clean using a soft dry cloth. Detail: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
The surface of the display panel has been specially treated and may be easily damaged. Do not tap or scratch the surface with your fi ngernail or other hard object.
Use care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances (this may degrade surface quality).
Caution
Use care not to subject the TV unit's surfaces to detergent. (A liquid inside the TV unit could lead to product failure.)
Use care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances (this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
Maintenance
Allow suffi cient space around the unit for radiated heat
10
10
6
10
7
(cm)
Electronic equipment Certain equipment may cause interference to sound and picture if placed near to this TV.
Equipment with an infrared sensor This TV also emits infrared rays (this may affect ope-
ration of other equipment).
Keep the TV away from this equipment
Adjust the LCD panel to your desired
angle
(View from the top)
6
+
-
-
+
123
456
789
0
OK
C
IDTV
N
MODE
Attaching the clamper
To tighten:
Keep the
knob pressed
Rear of the TV
To loosen:
Bundle the cables
Installing remote's batteries
Batteries for the Remote Control Transmitter
(2)
R6 (UM3)
Accessories/Options
Clamper
1
Pull open
Hook
2
Note the correct polarity (+ or -)
Close
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control unit.
Do not mix old and new batteries. Do not mix different battery types (such as alkaline and manganese batteries). Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
Remote Control Transmitter
EUR7651050A
Operating Instructions
Pan European Guarantee Card
1 Year Guarantee Registration
CRM (Customer Relationship Management)
Do not bundle the RF cable and mains lead together (could cause distorted image).
Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s assembly manual to fi x cables.
Standard accessories
Check that you have the accessories and items shown
Optional accessories
Wall-hanging bracket
TY-WK32LX20W
WARNING!
Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer.
Any damage resulting from not having
a professional installer mount your unit will void your warranty.
Always be sure to ask a qualifi ed technician to carry out set-up.
Incorrect fi tting may cause equipment
to fall, resulting in injury and product damage.
How to remove the TV Stand
Step 1: Remove the 2 fi xing
screws and hinge cover
Please contact your nearest Panasonic dealer to purchase the recommended wall-hanging bracket. For additional details, please refer to the wall-hanging bracket installation manual.
Step 2: Remove the 8 fi xing screws and the TV stand
SCREWS
7
Quick Start Guide
IDTV
REC
VCR DVD
VCR
TEXT
N
MODE
EXIT
TV/AVGUIDE
STTL INDEX HOLD
123
456
789
C
0
PROGRAMME
DIRECT TV REC
DVB
Analogue
ASPECT
MENU
OK
Function select
Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On.
Contrast Automatic Tracking System sensor
(senses brightness to adjust picture quality in "Auto" viewing mode) (p. 16)
DVB LED
Power LED
(Red light indicates Standby mode. When using the remote control, indicates the TV has received a command.)
Remote control signal receiver
Switches TV/AV
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Tuning mode (analogue mode) (p. 20)
(
Active for Timer Programming or Standby for Direct TV Recording :orange (fl ash) Timer Programming On :orange
(
)
Headphones jack (p. 30)
AV3 terminals (p. 30)
Store setting
(p. 20)
Used to store tuning and other function settings
(
)
On / Off switch
AV3
S-V
V
L
R
(
Identifying Controls
Standby On / Off switch
(Switches TV On or Off standby)
Switches DVB (digital broadcasting) / Analogue mode
(p. 11)
Changes picture aspect ratio
(p. 11)
Normalises (p. 20)
(Resets all settings to their default levels)
Selects programmes in sequence
Direct channel access Use together with numeric buttons to access analogue TV channels by entering UHF broadcast channel number.
(p. 11)
Programme / channel change buttons (0-9) and Teletext page buttons.
(p. 11 and p. 14)
When in Standby mode, switches TV On.
Subtitles (p. 11)
(To view subtitles)
Teletext (p. 14)
MENU Press to access the Picture, Sound and Setup menus
(p. 20 and p. 22)
Cursor buttons to make selections and adjustments
TV Guide
(p. 12)
VCR / DVD operations (p. 17)
Sound mute On / Off
Volume
Programme Information
(p. 11)
Teletext Index (p. 16)
Still Picture (p. 11)
Coloured buttons used for the selection, navigation and operation of various functions.
EXIT
(Returns to TV screen)
Switch between viewing TV or AV input.
(p. 17)
DIRECT TV Recording
To immediately record programme in VCR / DVD recorder with Q-Link connection (p. 36)
Identifying Controls
Accessories/Options
OK button to confi rm selections and choices. Press after selecting programme positions 1 - 99 (0 - 9 in Analogue mode) to avoid delay.
8
AV1 AV2
COMPONENT
RF OUT
RF IN
AV1 AV2
COMPONENT
Basic Connection
Mains lead
Mains lead
SCART cable (fully wired)
DVD Recorder or VCR
RF cable
Aerial Aerial
Rear of the TV
Rear of the TV
SCART:
21 pin connection used for video, audio and switching signals (Also known as Euro SCART and Peritel) RF: Radio Frequency - Signal received from terrestrial aerial. RGB / S-Video / Video:
Choose between these three video formats depending on personal preference and equipment requirement.
(RGB - Red, Green and Blue) VCR: Video Cassette Recorder
External equipment and cables shown are not supplied with this TV. Please ensure that the TV is disconnected from the mains socket before attaching or disconnecting any leads.
Ex.
1
Connecting aerial (TV only)
Ex.
2
Connecting DVD Recorder (VCR) (TV, DVD Recorder and VCR
)
Note
Connect to AV1 or AV2 for a DVD Recorder / VCR supporting Q-Link (p. 36).
Connect to AV1 for a Satellite receiver.
If connecting the TV and Satellite receiver with SCART cable, you can watch satellite broadcast by RGB input signal.
RF cable
RF cable
9
Quick Start Guide
RF OUT
RF IN
RF OUT
RF IN
RF IN
AV1 AV2
COMPONENT
DVD Recorder
or VCR
SCART cable (fully wired)
RF cable
Aerial
Mains lead
Rear of the TV
Satellite receiver
Basic Connection
SCART cable (fully wired)
Ex.
3
Connecting DVD Recorder (VCR) and Satellite receiver (
TV, DVD Recorder, VCR and satellite
)
AC 220-240 V 50 Hz
SCART cable (fully wired)
RF cable
RF cable
RF cable
10
MENU
OK
OK
OK
EXIT
VCR
EXITMENU
123
456
789
0
OK
0123456789
You now have the opportunit y to enter your details an d help the police crack crim e.
See instruction book.
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
Exit
Select character
Change character
Store Owner ID
Please Wait !
DVB Auto Setup
Prog. Channel Service Name NetID. TS ID. Quality
This will take about 3 mins.
4
5
6
7
8
30
30
30
30
30
12302
12302
12302
12302
12302
4158
4158
4158
4158
4158
9
9
9
9
9
BBC NEWS 24
BBCI
CBBC Channel
BBC Radio Wales
BBC Radio Cymru
6821
Exit
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
0123456789
You now have the opportunit y to enter your details an d help the police crack crim e. See instruction book.
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
Exit
Select character
Change character
Store Owner ID
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
Usable characters and numbers
1
(example: Owner ID)
On-screen operation guide will help you.
Auto Setup
Following the on-screen operation guide, enter your own choice of PIN number, name, etc.
For detailed procedures
"Owner ID" (p. 33)
Make a note of the PIN number in case you forget it.
Search and store TV channels automatically. These steps are not necessary if the setup has been completed your local dealer.
Ŷ
When inputting owner ID
Auto Setup is now complete and your TV is ready for viewing.
Ŷ
When inputting owner ID later
EXIT
You can now use the remote control to turn On the unit or turn the unit to standby mode. (Power LED: On)
2
If you input the ID later
"Owner ID" (p. 33)
If a compatible recording equipment with Q-Link or similar technologies (p. 36) is connected, analogue channel information is automatically downloaded to the equipment.
Auto Setup will start to search for TV channels and store them.
To check programme list at-a-glance
TV Guide (DVB) (p. 12) Programme Guide (Analogue) (p. 13)
To edit analogue channels
"Programme edit" (p. 31)
The sorted programme order depends upon the TV signal, the broadcasting system and reception conditions.
Ŷ
ON SCREEN HELP Instructions box
used to open the main menus and to return to the previous menu
used to exit the menu system and return to the normal viewing screen
used to move the cursor and select menus
used to access menus, adjust levels or to select from a range of options
used to store settings after adjustments have been made or options have been set
Many features available on this TV can be accessed via the On Screen Display menu.
Note
If tuning and downloading data have failed, perform
"Auto
Setup" (
p. 31).
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On with MAINS power On / Off switch.
Using the On Screen Displays
Ŷ
How to use remote control
11
ViewingQuick Start Guide
VCR
MODE
EXIT
GUIDE
STTL HOLD
123
456
789
C
0
DVB
Analogue
ASPECT
OK
Watching TV
Auto Setup
Ŷ
In DVB
To select programmes using TV Guide (p. 12)
Ŷ
In Analogue
To select a channel using programme guide (p. 13)
To select a channel inputting the channel number, e.g. 39.
C
ĺ
3
ĺ
9
VCR
123
456
789
0
MODE
DVB
A
nalogue
Corontation Street 20:00~20:55
Change Category
For info press
1 BBC ONE WALES
20:30
Multi-Audio
Encrypted
TXT
Subtitle
Now
Profile 1
Watching TV
Select a channel
up
Volume
3
2
DVB Analogue
1
1 CH_ _
Note
To watch pay-TV (p. 25)
Select DVB (Digital Video Broadcasting) or Analogue
Information
banner
Turn power on
BCC 1
HOLD
Freeze / unfreeze picture
Hold
Display subtitles
STTL
Display / hide subtitles (if available)
To change the language for DVB "Preferred subtitles" (p. 25) (If available)
Ŷ
Other useful functions (Operate after )
MAINS power On / Off switch should be On. Picture will appear.
(Press for about 1 second)
down
Display information banner
Display programme information
Ŷ
In DVB:
Ŷ
In Analogue:
Displays analogue information for a few seconds.
To set display timeout (p. 25)
To hide
EXIT
Change aspect ratio
or
14 : 9
A
SPECT
Each press changes the mode.
While the bar is displayed
red
green
Auto aspect / 16:9 / 14:9 / 4:3 / Zoom1 / Zoom2 / Zoom3
Corontation Street 20:00~20:55
Change Category
For info press
1 BBC ONE WALES
20:30
Multi-Audio
Encrypted
TXT
Subtitle
Now
Profile 1
Channel
Programme
Broadcast time
Current time
During scrambled broadcasting
Category
Features available
To change the category
blue
Information of another channel
OK
Information on next programme
OK
To watch the programme
listed in the banner
OK
Extra information
(To normal banner )
Appears also when changing channel.
To change the mode with colour buttons
Change the aspect ratio (p. 42)
Enjoy viewing the picture at its optimum size and aspect
1
12
MODE
DVB
A
nalogue
Exit
Info
Change display mode Select Programme
Select channel
Timer Programming
Category Prog. type
+24 Hr
DVB TV Guide
: Portrait
Wed 12/05/04 10:46
Wed 12th
Prog. type
Category
All Services
All Types
Page up
Page down
Category
All Services
19:30~20:00
20:00~20:30
20:30~21:00
21:00~22:00
22:00~22:30
22:30~23:00
23:00~23:10
23:10~00:00
Eastender
DlY SOS
The Bill
Red Cap
Live junction
POP 100 Cinema info
Sports
1 BBC1 2 BBC2 44 Channel4 444 SC4
All Services
Free TV
Pay TV
Radio
Information
Profile 1
Profile 2
Profile 3
Profile 4
Category
All Services
All Services
Free TV
Pay TV
Radio
Information
Profile 1
Profile 2
Profile 3
Profile 4
Category
All Services
Red Cap
The Bill
Good bye
Terminator
News
The Bill
So
Hell
The
21:00 21:30
Red Cap
The Bill
Good bye
Terminator
News
The Bill
So
Hell
The
21:00 21:30
All Types
Movies
News
Entertainment
Sport
Children’s
Education
Lifestyle
Drama
Prog. type
All Types
IDTV
EXIT
GUIDE
MENU
OK
MODE
DVB
Analogue
Exit
Info
Change display mode Select channel
Select Programme
Timer Programming
Category Prog. type
-24 Hr +24 Hr
DVB TV Guide
:Landscape
Thu 05/08/04 18:50
BBC1
BBC2
ITV1
Channel4
five
ITV2
SC4
1
2
21
44
122
142
144
Eastender
Hot Wars
Emmerdal.
10 O
'
clock News BBC
Panoroma
I'm A Celebrity
Rugby
Red Cap
The Bill
Good bye
Terminator
News
The Bill
So
Hell
The
Fri 6th
DIY SOS
Coronation Street
Sex And The City
15 To1
The Bill
Holiday Program
Pepsi Char.
Pop Idol
20:00-20:30
Time: 19:30 20:00
DIY SOS: We open in the Battersdys
Prog. type
Category
All Services
20:30 21:00 21:30
All Types
Page up
Page down
Category
All Services
OK
GUIDE
OK
Ŷ
To change the layout
GUIDE
(Landscape / Portrait)
Ŷ
To previous day
red
Ŷ
To next day
green
Ŷ
To view a programme list of the selected category
yellow
Ŷ
To view a programme list of the selected type
blue
Using TV Guide
Portrait (Displays by
broadcaster)
select
category
TV GuideʊElectronic Programme Guide (EPG) provides an on-screen listing of programmes currently broadcast and future broadcasts over the next seven days (depending on the broadcaster).
TV Guide date
Programme (TV Guide start page)
TV Guide time
Channel
View TV Guide (landscape or portrait)
select
type
Current date and time
(Category list)
(Type list)
To list favourite channels (p. 27)
Ŷ
To return to the start page
MENU
Ŷ
To return to TV
EXIT
(DVB mode)
view
view
If in Analogue mode
Select DVB
Landscape
(Displays by
broadcaster)
View "Portrait" to see one channel at a time View "Landscape" to see many channels
2
1
13
Viewing
MODE
DVB
A
nalogue
Note
When this TV unit is turned on for the fi rst time, or the unit is switched off for more than a week, it may take some time before the TV Guide is completely shown.
When recording programmes, you must make the proper settings on the external recording equipment connected to the unit. If a compatible recording equipment with Q-Link or similar technologies is connected to the unit (p. 8) and the "Q-Link" settings (p. 23) are completed, no setting of the equipment is required.
Also read the manual of the recording equipment.
Exit
Return to List
View Programme
DVB TV Guide
Thu 05/08/04 18:49
OK
Select the programme
select
Details
View details of the programme
To return to the start page
OK
select
Select the programme now on the air
(TV screen)
Watch the programme
watch
Exit Return
Select timer
Edit timer
Delete
DVB Timer Programming
Thu 05/08/04 18:49
13BBC1
ITV1
6/8 FR
7/8 SA
18:00
21:30
20:00
22:30
12060Off
Off
Pos.
Name Date Start End
min.
0 9
OK
DVB LED
Select the programme to be broadcast
Timer programming to record
(Timer Programming screen)
Ŷ
To check / change / cancel a timer programming event
"Timer Programming" (p. 34)
Orange DVB LED (Rapid blinking during recording)
set
Using TV Guide (DVB)
In Analogue – Analogue Programme Guide (Analogue mode)
The Analogue Programme Guide shows channel list only. (No programme info in Analogue mode)
If in DVB mode
Select Analogue
View a channel list
Select the channel and watch
Ŷ
To change pages
Analogue Programme Guide
Prog. Name Chan.
VCR :
1 : 2 : 3 : 4 : 5 : 6 : 7 : 8 :
9 : 10 : 11 : 12 :
CH21 CH44 CH51 CH41 CH47 CH23 CH26 CH58
-
-
-
-
-
BBC1 BBC2 ITV S4C
Prog. Name Chan.
13 : 14 : 15 : 16 : 17 : 18 : 19 : 20 : 21 : 22 : 23 : 24 :
-
-
-
-
-
-
-
-
-
-
-
-
Ŷ
Other useful functions (Operate after )
View details
select
(Analogue mode)
OK
select
watch
GUIDE
14
VCR
TEXT STTL INDEX HOLD
123
456
789
0
MENU
OK
MODE
DVB
Analogue
MODE
DVB
A
nalogue
Ŷ
To return to TV
TEXT
TEXT
Viewing Teletext
Switch to Teletext
How to use
In all cases, it is possible to navigate the pages using buttons on the remote control, but because the commands available must apply to all manufacturers of DVB equipment, some on screen commands may not correspond exactly to the remote control buttons. For example:
3
You can enjoy news, weather forecasts and subtitles, etc. (depending on the broadcaster)
Note
As soon as you switch to a DVB channel with links to a teletext service, software is downloaded in the background to enable the teletext function. This means that when switching to a DVB channel, you should wait for approximately 5 seconds before pressing the TEXT button - this will allow the software to download. If you press the TEXT button before download is complete, there will be a short delay before the text screen is displayed.
While navigating DVB teletext, you will fi nd there is a short delay when moving between pages while the page downloads. There is often a prompt shown somewhere on the page (for example "Loading") to let you know that this is happening.
DVB (digital broadcasting) mode
DVB teletext services
DVB teletext services differ greatly from analogue teletext. When you switch to a DVB teletext service, the images you see can contain graphics and text, laid out and controlled in a manner decided by the broadcaster.
You can check if the programme has teletext information.
17:51 28 Feb
Corontation Street 20:00~20:55
Change Category
For info press
1 BBC ONE WALES
20:30
Multi-Audio TXT
Subtitle
Now
Profile 1
Ŷ
To change the channel
When "select" or "go" is displayed
OK
When "Ż", "Ź", "Ÿ", "ź" symbol is displayed
OK
When the key words are displayed on colour bar
red
green
yellow
blue
When options with numbers are displayed
VCR
123
456
789
0
When "i" is displayed (information)
Displayed if programme has teletext information
1
If in Analogue mode
Select DVB
Information banner (p. 11)
2
If cannot be switched to Teletext, set Subtitles OFF. (p. 11)
15
Viewing
VCR
TEXT STTL INDEX HOLD
123
456
789
0
MENU
OK
MODE
DVB
Analogue
MENU
MENU
red
green
MODE
DVB
A
nalogue
FULL / TOP / BOTTOM
Reveal hidden data
(TOP) (BOTTOM) Normal (FULL)
Re-hide
red
Reveal hidden words e.g. quiz page answers
Viewing Teletext
Switch to Teletext
Select the page
3
Analogue mode
Ŷ
To adjust contrast
MENU
1
If in DVB mode
Select Analogue
<< 01 02 03 04 05 06 07 >>
TELETEXT
INFORMATION
17:51 28 Feb
Displays the index page (content varies depending on the broadcasters)
VCR
123
456
789
0
up
or
or
(Corresponds to the colour bar)
down
red
green
yellow
blue
(Press twice)
(Press twice)
Ŷ
Using Analogue teletext
What is FASTEXT mode (default)?
In FASTEXT mode, four differently coloured subjects are situated at the bottom of the display. To access more information about one of these subjects, press the appropriately coloured button. This facility enables fast access to information on the subjects shown.
What is List mode?
In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of these numbers can be altered and stored in the TV’s memory. ("Store Frequently viewed pages", p. 16)
Ŷ
To change mode "Teletext" in Setup menu (p. 23)
OK
Note
Contrast will be lowered in the still picture to prevent after-image.
Time / date
Current page number
Sub page number
Colour bar
As the blue bar is displayed
(Expand the BOTTOM half)
(Continued)
TEXT
2
Ŷ
To return to TV
TEXT
Press once to have picture and text. Press again to return to TV.
Loading...
+ 33 hidden pages