Panasonic Viera TX-26LXD600, Viera TX-32LXD600 Operating Instructions Manual
IDTV
6
Operating Instructions
LCD Television
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
U.K. Standard
Printed in Czech Republic
Model No. TX-26LXD600
TX-32LXD600
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Licence
Trademark
Credits
•
DVB is a trademark of the DVB Digital Video Broadcasting Project (1991 to 1996).
•
VGA is a trademark of International Business Machines Corporation.
•
Macintosh is a registered trademark of Apple Computer, USA.
•
S-VGA is a registered trademark of the Video Electronics Standard Association. Even if no special
notation has been made of company or product trademarks, these trademarks have been fully respected.
•
SD Logo is a trademark.
•
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks or registered trademarks
of HDMI Licensing LLC.
•
HDAVI ControlTM is a trademark of Matsushita Electric Industrial Co., Ltd.
•
TruSurround XT, SRS and symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
Information on Disposal for Users of W aste Electrical & Electronic Equipment
(private households)
T his s ymbol on t he produ cts and / or a cc ompan y ing do c umen ts means t ha t u s ed ele ct rical an d
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternativel y , in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Di s posing o f t hi s produc t c orrec t ly will help t o s ave v aluable resources and pre v en t any po t en t ial nega t iv e
effects
on
human health and the environment which could otherwise arise from inappropriate
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for
further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method
of disposal.
2
3
Viewing Advanced FAQs, etc.Quick Start Guide
Contents
Turn your living room into a home theatre!
Experience an amazing level of multi-media excitement
•
Safety Precautions ······································ 4
(Warning & Caution)
•
Notes ··························································· 5
•
Maintenance ··············································· 5
Be Sure to Read
Basic Features
•
Watching TV ·············································· 12
•
Using TV Guide (DVB) ······························ 14
•
Watching VCR, DVD and Satellites ··········16
•
Viewing Teletext ········································18
Advanced Features
•
How to Use Menu Functions ·····················21
(picture, sound quality, etc.)
•
DVB Settings (DVB) ·································· 26
(pay-TV, subtitles, etc.)
•
Profile Edit / Child Lock (DVB) ··················28
•
DVB Tuning Menu (DVB) ··························30
•
Displaying PC Screen on TV ····················· 31
•
Editing and Setting Channels (Analogue)
···· 32
•
Restore Settings ······································· 34
•
Owner ID ··················································· 35
•
Recording Controls ···································36
•
Viewing from card
(MPEG4 Videos and photos) ····················· 38
•
Recording to card ······································ 40
•
Q-Link Functions ······································· 42
•
HDMI Functions ········································43
•
External Equipment ··································· 46
Enjoy your TV!
•
Technical Information ································ 48
•
FAQs ·························································51
•
On screen messages ································53
•
On screen messages (SD Card) ···············54
•
Index ························································· 55
•
Specifications ············································ 55
•
Licence ······················································ 56
FAQs, etc.
Accessories/Options
············ 6
Identifying Controls
·············· 7
Basic Connection
·················· 8
Auto Setup
······························ 10
Enjoy rich multi-media
Quick Start Guide
Receive terrestrial digital services using an integrated (Digital Video Broadcasting) tuner
(Display DVB programmes with TV Guide (p. 14) / Timer recording (p. 36) /
Register and instantly call up favourite programmes with Profile Edit (p. 28))
Sharp pictures with HDMI terminal
Control DVD recorder / VCR via TV with Q-Link connection
(p. 42)
Create home theatre and DVD recorder link-ups with
"Control with HDMI" without complicated settings!
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
TX-26LXD600 Declaration of Conformity No 3854, 15th November 2005
TX-32LXD600 Declaration of Conformity No 3853, 15th November 2005
Camcorder
Amplifier with
Speaker system
VCR
DVD player
DVD recorder
Personal
computer
Satellite receiver
SD memory card
4 5
Example 1
Example 2
Safety Precautions
AC 220-240 V
50 / 60 Hz
Electronic equipment
In particular, do not place video equipment near the
TV (electromagnetic interference may distort images
/ sound).
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect
operation of other equipment).
Keep the TV away from these equipment
Warning & Caution
Notes
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
The wire which is coloured BLUE must be connected to the terminal in the mains plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the mains plug which is
marked with the letter L or coloured RED.
Under no circumstances should either of these wires be connected to the Earth terminal of the
three pin mains plug, marked with the letter E or the earth symbol
.
How to replace the fuse.
For plug type shown in example 1:
Lift out the removable fuse compartment with a screwdriver and replace the fuse, then refit
securely into the mains plug (see example 1).
For plug type shown in example 2:
Lift open the fuse compartment, in the mains plug, with a screwdriver, and replace the fuse, then
press the fuse cover down securely (see example 2).
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your mains plug, proceed as follows.
IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Blue: Neutral Brown: Live
If a new mains plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be
removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock
if the cut off mains plug is inserted into any 13 amp socket.
If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local Panasonic Dealer.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is
fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 5 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark on the body of the fuse.
Handling the mains plug
Ensure that the mains plug is easily accessible at all
times. The On/Off switch on this model does not fully
disconnect the TV from the mains supply. Remove the
mains plug from the wall socket when the TV is not used
for a prolonged period of time.
Note
If the TV is not switched off when the TV station stops
transmitting, it will automatically go to standby mode
after 30 minutes. This function will operate only in
Analogue TV mode.
Do not expose to
direct sunlight and
other sources of heat
Avoid exposing the TV to direct
sunlight and other sources of heat. To
prevent fire never place any type of
candle or naked flame on top or near
the TV.
Power source
This TV is designed to operate on 220-240V,
50 / 60 Hz AC.
Display panel
Cabinet
Mains plug
Daily care: Gently wipe the surface clean of dirt by using
a soft cloth.
Major contamination: Wipe the surface clean using a soft
cloth dampened with clean water or water containing a
small amount of neutral detergent. Then, using a soft dry
cloth, evenly wipe the surface clean until it is dry.
Daily care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water
or water containing a small amount of neutral detergent.
Then, wring the cloth and wipe the surface clean with it.
Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals.
(Moisture and dust may lead to fire or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
•
The surface of the display panel has been specially
treated and may be easily damaged.
Do not tap or scratch the surface with your fingernail or
other hard object.
•
Use care not to subject the surface to insect repellent,
solvent, thinner, or other volatile substances
(this may degrade surface quality).
Caution
•
Use care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
•
Use care not to subject surfaces to insect repellent,
solvent, thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
•
Do not allow the cabinet to make contact with a rubber
or PVC substance for a long time.
Maintenance
Allow sufficient space around
the TV for radiated heat
10
10
6
10 10
(cm)
Do not remove the cover
Do not remove the rear cover as live parts are
accessible when it is removed. There are no
user serviceable parts inside.
Do not expose to rain or
excessive moisture
To prevent damage which might result in electric
shock or fire, do not expose this TV to rain or
excessive moisture.
This TV must not be exposed to dripping or
splashing water and objects filled with liquid,
such as vases, must not be placed on top of or
above the TV.
Do not block the rear
ventilation openings
Ventilation should not be impeded by covering
the ventilation openings with items such as
newspapers, tablecloths and curtains.
Cabinet and display panel care
Remove the mains plug from the wall socket.
The cabinet and display panel can be cleaned
with a soft cloth moistened with mild detergent
and water. Do not use solutions containing
benzol or petroleum.
TV can produce static electricity, care must be
taken whenever touching the TV screen.
Use only the dedicated
stands / mounting equipment
Using an unauthorized stand or other fixtures may
make the TV shaky, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
Use optional stands / mounts (p. 6).
Do not place the TV on
sloped or unstable surfaces
The TV may fall off or tip over.
Adjust the LCD panel to your desired
angle
(View from the top)
6
7
Quick Start Guide
IDTV
Installing remote's batteries
Batteries for the Remote
Control Transmitter
(2)
•
R6 (UM3)
Identifying ControlsAccessories/Options
Clamper
•
TMME203
(1)
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
To tighten:
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such
as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd)
batteries.
•
Do not burn or breakup batteries.
Remote Control
Transmitter
•
N2QAYB000047
Attaching the clampers
•
Do not bundle the RF cable and mains lead together (could cause distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option’s assembly
manual to fix cables.
Function select
Increases or decreases the programme position by one. When
a function is already displayed, press to increase or decrease
the selected function. When in Standby mode, switches TV On.
MAINS Power
On / Off switch
Lift door to open
Backlight Automatic Tracking System sensor
(senses brightness to adjust picture quality in "Auto" viewing mode) (p. 23)
Remote control
signal receiver
STR (Normalisation store)
(Stores tuning and other
function settings)
TV/AV switch
•
Volume / Contrast / Brightness / Colour / Sharpness / Tint (NTSC mode) /
Bass / Treble / Balance / Manual tuning (analogue mode) (p. 32)
Normalises (p. 22)
(Resets all settings to their default levels)
Cursor buttons to make selections and
adjustments
Standard accessories
•
Identifying Controls
•
Accessories/Options
Check that you have the accessories and items shown
Operating Instructions
Pan European Guarantee Card
Keep the
knob pressed
DVB LED
•
Active for Timer Programming or
Standby for Direct TV Recording :orange (flash)
Timer Programming On :orange
Headphones jack (p. 46)
AV4 terminals (p. 46)
Power LED
•
Standby: red
On: green
When using the remote control, indicates
the TV has received a command.
Optional accessories
SD CARD slot (p. 38)
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Changes picture aspect ratio (p. 13)
TV Guide (p. 14)
Selects programmes in sequence
Subtitles (p. 13) (To view subtitles)
Teletext (p. 18)
OK button to confirm selections and
choices.
Press after selecting programme
positions 1 - 99 (0 - 9 in Analogue mode)
to avoid delay.
VCR / DVD operations (p. 17)
Volume
Programme Information (p. 13)
Teletext Index (p. 20)
Still Picture (p. 13)
Coloured buttons used for the
selection, navigation and operation of
various functions.
EXIT (Returns to TV screen)
Switch between viewing TV or AV input.
(p. 16)
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection
(p. 42)
MENU
Press to access the Picture, Sound and
Setup menus
(p. 22 and p. 24)
Direct channel access
Use together with numeric buttons to
access analogue TV channels by entering
UHF broadcast channel number.
(p. 12)
SD menu (p. 38 and p. 40)
SD Recording (p. 40)
Switches Timer recording On/Off (p. 36)
Switches DVB (digital broadcasting) /
Analogue mode
(p. 12)
Programme / channel change buttons (0-9)
and Teletext page buttons.
(p. 12 and p. 18)
When in Standby mode, switches TV On.
Rear of the TV
Wall-hanging
bracket
TY-WK32LX20W
MULTI WINDOW (p. 13)
To loosen:
•
TMME248
(2)
1. Insert the clamper in a
hole to attach
Fix the HDMI cable
2. Open the holder
3. Insert the HDMI cable
and close the holder
securely
4. Slide the holder and fix
the HDMI cable securely
To loosen:
Bundle the
cables
hole
holder
Keep the
knob pressed
1 Year Guarantee Registration
CRM (Customer Relationship Management)
WARNING!
•
Failure to use a Panasonic bracket or choosing to mount the unit
yourself will be done at the risk of the consumer.
Any damage resulting from not having a professional installer mount
your unit will void your warranty.
•
Always be sure to ask a qualified technician to carry out set-up.
Incorrect fitting may cause equipment to fall, resulting in injury and
product damage.
How to remove the TV Stand
Remove four screws.
Rear of the TV
Please contact your nearest Panasonic dealer to purchase the
recommended wall-hanging bracket. For additional details, please
refer to the wall-hanging bracket installation manual.
8
9
Quick Start Guide
COMPONENT
RGB
VIDEO
S VIDEO
VIDEO
S VIDEO
RGB
VIDEO
AV3
(Q-Link)
AV2
(Q-Link)
AV1
RF OUT
RF IN
RF OUT
RF IN
RF IN
COMPONENT
RGB
VIDEO
S VIDEO
VIDEO
S VIDEO
RGB
VIDEO
AV3
(Q-Link)
AV2
(Q-Link)
AV1
COMPONENT
RGB
VIDEO
S VIDEO
VIDEO
S VIDEO
RGB
VIDEO
AV3
(Q-Link)
AV2
(Q-Link)
AV1
RF OUT
RF IN
Basic Connection
DVD Recorder
or VCR
SCART cable
(fully wired)
RF cable
Aerial
Mains lead
Mains lead Mains lead
SCART cable
(fully wired)
DVD Recorder or VCR
RF
cable
Aerial AerialRear of the TV Rear of the TV
SCART:
21 pin connection used for video, audio and switching signals (Also known as Euro SCART and Peritel)
RF: Radio Frequency - Signal received from terrestrial aerial.
RGB / S-Video / Video:
Choose between these three video formats depending on personal preference and equipment requirement.
(RGB - Red, Green and Blue)
VCR: Video Cassette Recorder
DVD: Digital Versatile Disc
Rear of the TV
Satellite receiver
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
•
Basic Connection
SCART cable
(fully wired)
Ex.
1
Connecting aerial
(TV only)
Ex.
2
Connecting DVD Recorder (VCR)
(TV, DVD Recorder and VCR
)
Note
•
Connect to AV3 for a DVD Recorder / VCR supporting
Q-Link (p. 42).
•
Connect to AV1 for a Satellite receiver.
•
If connecting the TV and Satellite receiver with SCART
cable, you can watch satellite broadcast by RGB input
signal.
Ex.
3
Connecting DVD Recorder (VCR) and Satellite receiver
(
TV, DVD Recorder, VCR and satellite
)
AC 220-240 V
50 / 60 Hz
SCART cable
(fully wired)
RF cable
RF cable
RF cable
RF cable
RF cable
Cable cover
removal and fitting
1. Insert the claws (at 3 points) at
the bottom end.
2. Push until it clicks.
Removal Fitting
1. Push down hooks and pull the
cover slightly towards yourself to
disengage the claws (at 3 points).
2. Slowly pull out in the downward
direction.
10
11
Quick Start Guide
IDTV
012345678 9
Y ou now have the opportunit y
to enter your details an d
help the police crack crim e
see instruction boo k
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
Exit
Select character
Change character
Store Owner ID
Please W ait !
DVB Auto Setup
Prog. Channel Service Name NetID. TS ID. Quality
This will take about 3 mins.
4
5
6
7
8
30
30
30
30
30
12302
12302
12302
12302
12302
4158
4158
4158
4158
4158
9
9
9
9
9
BBC NEWS 24
BBCI
CBBC Channel
BBC Radio W ales
BBC Radio Cymru
68 21
Exit
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
012345678 9
Y ou now have the opportunit y
to enter your details an d
help the police crack crim e
see instruction boo k
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
Exit
Select character
Change character
Store Owner ID
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
Usable characters and numbers
1
(example: Owner ID)
On-screen operation
guide will help you.
Auto Setup
Following the on-screen operation
guide, enter your own choice of PIN
number, name, etc.
•
For detailed procedures
"Owner ID" (p. 35)
•
Make a note of the PIN number
in case you forget it.
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
■
When inputting owner ID
Auto Setup is now complete and your TV is ready for viewing.
■
When inputting owner ID later
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
2
•
If you input the ID later
"Owner ID" (p. 35)
•
If a compatible recording equipment
with Q-Link or similar technologies
(p. 42) is connected, analogue
channel information is automatically
downloaded to the equipment.
•
Auto Setup will start to search for
TV channels and store them.
•
To check programme list
at-a-glance
TV Guide (DVB) (p. 14)
Programme Guide (Analogue)
(p. 15)
•
To edit analogue channels
"Programme edit" (p. 33)
•
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
■
ON SCREEN HELP Instructions box
used to open the main menus and to return to the previous menu
used to exit the menu system and return to the normal viewing screen
used to move the cursor and select menus
used to access menus, adjust levels or to select from a range of options
used to store settings after adjustments have been made or options have been set
Many features available on this TV can be accessed via the On Screen Display
menu.
Note
•
If tuning and downloading data have failed, perform
"Auto Setup"
(
p. 33).
•
If you turned the TV Off during Standby mode last time, the TV will
be in Standby mode when you turn the TV On with MAINS power
On / Off switch.
■
How to use remote control
•
Auto Setup
Using the
On Screen
Displays
12
13
Viewing
14 : 9
Corontation Street
20:00~20:55
Change Category
For info press
1 BBC ONE WALES
20:30
Multi-Audio
Encrypted
TXT
Subtitle
Now
Profile 1
SwapSource
2
AV1
SwapSource
2
AV1
SwapSource
2
AV1
SwapSource
2
AV1
Corontation Street
20:00~20:55
Change Category
For info press
1 BBC ONE WALES
20:30
Multi-Audio
Encrypted
TXT
Subtitle
Now
Profile 1
red
red red
blue
■
In DVB
•
To select programmes using TV Guide (p. 14)
■
In Analogue
•
To select a channel using programme guide (p. 15)
•
To select a channel inputting the channel number, e.g. 39.
→ →
Watching TV
Select a channel
up
Volume
3
2
DVB
Analogue
1
1
CH_ _
Note
•
To watch pay-TV (p. 27)
Select DVB (Digital Video Broadcasting) or
Analogue
Information banner
Turn power on
BBC 1
Freeze / unfreeze picture
Hold
Display
subtitles
Display / hide subtitles (if available)
■
Other useful functions (Operate after )
MAINS power On / Off switch should be On.
Picture will appear.
(Press for about 1 second)
down
Display
information
banner
Display programme information
■
In DVB:
■
In Analogue:
Displays analogue information for a few seconds.
Change
aspect
ratio
or
•
Each press changes the mode.
While the bar is displayed
red
green
Auto aspect / 16:9 / 14:9 / 4:3 / Zoom1 / Zoom2 / Zoom3
Channel
Programme
Broadcast time
Current time
During scrambled
broadcasting
Category
Features
available
To change the
category
blue
•
To change the mode with colour buttons
Change the aspect ratio (p. 48)
Enjoy viewing the picture at its optimum size and aspect
1
To set display timeout (p. 27)
To hide
Information of another channel
Information on next programme
To watch the programme listed in the banner
Extra information
(To normal banner )
Appears also when changing channel.
View in multi window (p. 50)
Watch TV,
DVD, etc.
in multi
window
Main
screen
Colour bar Sub
screen
•
To change the layout,
etc. first show the
colour bar
•
To change the layout
red
green
•
To swap
blue
•
To change the source
of sub screen
yellow
•
To return to the
normal single-screen
view
•
Remote control operations
apply to the main screen.
•
Watching TV
•
To change the language for DVB "Preferred subtitles" (p. 27) (If available)
14
15
Viewing
IDTV
Exit
Info
Change display mode
Select Programme
Select channel
T imer Programming
Categor y Prog. typ e
+24 H r
DVB TV Guid e
: Portrai t
W ed 12/05/04 10:4 6
W ed 12t h
Prog. typ e
Categor y
All Service s
All T ype s
Page u p
Page dow n
Categor y
All Service s
19:30~20:0 0
20:00~20:3 0
20:30~21:0 0
21:00~22:0 0
22:00~22:3 0
22:30~23:0 0
23:00~23:1 0
23:10~00:0 0
Eastender
DlY SOS
The Bill
Red Cap
Live junction
POP 100
Cinema info
Sports
1 BBC 1 2 BBC 2 44 Channel 4 444 SC 4
All Services
Free TV
Pay TV
Radio
Information
Profile 1
Profile 2
Profile 3
Profile 4
Category
All Services
All Services
Free TV
Pay TV
Radio
Information
Profile 1
Profile 2
Profile 3
Profile 4
Category
All Services
Red Cap
The Bill
Good bye
Terminator
News
The Bill
So
Hell
The
21:00 21:30
Red Cap
The Bill
Good bye
Terminator
News
The Bill
So
Hell
The
21:00 21:30
All Types
Movies
News
Entertainment
Sport
Children’s
Education
Lifestyle
Drama
Prog. type
All Types
Exit
Info
Change display mode
Select channel
Select Programme
T imer Programming
Categor y Prog. typ e
-24 H r +24 H r
DVB TV Guid e
:Landscap e
Thu 05/08/04 18:5 0
BBC1
BBC2
ITV1
Channel4
five
ITV2
SC4
1
2
21
44
122
142
144
Eastende r
Hot W ar s
Emmerdal .
10 O
'
clock News BB C
Panorom a
I'm A Celebrit y
Rugb y
Red Ca p
The Bil l
Good by e
T erminato r
New s
The Bil l
S o
Hel l
Th e
Fri 6t h
DI Y SO S
Coronation Stree t
Sex And The Cit y
15 T o 1
The Bil l
Holiday Progra m
Pepsi Cha r .
Pop Ido l
20:00-20:3 0
T ime : 19:3 0 20:0 0
DIY SOS: W e open in the Battersdy s
Prog. typ e
Categor y
All Service s
20:3 0 21:0 0 21:3 0
All T ype s
Page u p
Page dow n
Categor y
All Service s
Exit
Return to List
View Programme
DVB T V Guide
Thu 05/08/04 18:4 9
Exit
Return
Select timer
Edit timer
Delete
DVB Timer Programming
Thu 05/08/04 18:49
13BBC1
ITV1
6/8 FR
7/8 SA
18:00
21:30
20:00
22:30
12060Off
Off
Ext
Ext
Pos.
Name Date Start End
min. Media
0 9
Analogue Programme Guide
Prog. Name Chan.
VCR :
1 :
2 :
3 :
4 :
5 :
6 :
7 :
8 :
9 :
10 :
11 :
12 :
CH21
CH44
CH51
CH41
CH47
CH23
CH26
CH58
-
-
-
-
-
BBC1
BBC2
ITV
S4C
Prog. Name Chan.
13 :
14 :
15 :
16 :
17 :
18 :
19 :
20 :
21 :
22 :
23 :
24 :
-
-
-
-
-
-
-
-
-
-
-
-
red
green
yellow
blue
TV Guide
time
Channel
■
To change the layout
(Landscape / Portrait)
■
To previous day
■
To next day
■
To view a
programme list
of the selected
category
■
To view a
programme list
of the
selected type
Using TV Guide
Portrait (Displays by time)
select
category
TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of programmes currently
broadcast and future broadcasts over the next seven days (depending on the broadcaster).
TV Guide
date
Programme (TV Guide start page)
View TV Guide (landscape or portrait)
select
type
Current date and time
(Category list)
(Type list)
To list favourite
channels (p. 29)
■
To return to TV
(DVB mode)
view
view
If in Analogue mode
Select DVB
Landscape
(Displays by
broadcaster)
View "Portrait" to see one channel at a time
View "Landscape" to see many channels
2
1
Note
•
When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time
before the TV Guide is completely shown.
•
When recording programmes, you must make the proper settings on the external recording equipment connected
to the TV or insert a Card in the TV.
If a compatible recording equipment with Q-Link or similar technologies is connected to the TV (p. 8) and the
"Q-Link" settings (p. 25) are completed, no setting of the equipment is required.
•
Also read the manual of the recording equipment.
Select
the programme
select
Details
View details
of the
programme
To return
to the start page
select
Select the programme now on the air
(TV screen)
Watch the
programme
watch
DVB LED
Select the programme to be broadcast
and select the recording device
Timer
programming
to record
■
To check / change / cancel a timer
programming event
"Timer Programming" (p. 36)
•
Orange DVB LED
(Rapid blinking during recording)
•
Using TV Guide (DVB)
In Analogue – Analogue Programme Guide (Analogue mode)
The Analogue Programme Guide shows channel list only. (No programme info in Analogue mode)
If in DVB mode
Select Analogue
View a channel list
Select the channel and watch
■
To change pages
■
Other useful functions (Operate after )
View details
(Analogue mode)
(Timer Programming screen)
•
EXT : External device
•
SD : SD Card
Turn On the DVB LED
select
set
select
watch
■
To return to TV Guide
16
17
Viewing
Terminal
AV1 AV2 AV3 AV 4
Component
PC
HDMI1
HDMI2
Manual input
selection
AV1
AV2
AV2S
(S-video input)
AV3
AV3S
(S-video input)
AV4
AV4S
(S-video input)
ComponentPCHDMI1
HDMI2
Auto input
selection
EC1/RGB
AV1/RGB
(RGB input)
EC2
EC3/RGB
AV3/RGB
(RGB input)
――
―
EC/
HDMI1
HDMI2
HDMI1/2
green
red
yellow
green
yellow
blue
red
blue
Watching VCR, DVD and Satellites
2
3
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
Connect the Satellite receiver and you can watch satellite broadcasts.
To connect the equipment (p. 8 and p. 9)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Select the connector
connected to the equipment
AV1 AV2/
S-video
AV3/
S-video
AV4/
S-video
Component/
PC
(AV mode screen)
Note
•
If the external equipment has an aspect adjustment function, set to "16:9".
•
For details, see the manual of the equipment or ask your local dealer.
•
HDMI (p. 43)
■
To return to TV
•
example: AV1
red
PC
blue
yellow
(twice)
Select the external input
HDMI1/
HDMI2
Displays the selected connector
1
Turn the TV on
■
When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
Receives input signals automatically when playback starts or
satellite receiver is switched on
•
Input signals are automatically identified by the SCART (pin 8) terminal.
•
This function will be available for HDMI connection too (p. 43).
■
If input mode is not switched automatically
Perform and
•
When colour bar disappears Press any coloured buttons
•
You can also select the connector using the TV/AV button on the front panel of the TV.
Press the button repeatedly until you reach the connector to view.
•
Dependant on DVD/VCR setup
Screen display
•
Watching VCR, DVD and Satellites
VCR / DVD switch
∗
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
Panasonic equipment connected to the TV can be directly operated with the remote control.
Note
•
After setting, execute operation confirmation.
•
The respective VCR / DVD code is turned to the default when battery has been exchanged. Set it again.
•
Depending on the model, operation may not be possible.
∗
The remote control will be available for various Panasonic equipment with the following settings.
Switch to select VCR or DVD you want to change
Press and hold while
operating
Enter the code below
(two digit code)
Press
VCR
Equipment Code
VCR 10 (default)
DVD 11
DVD
Equipment Code
DVD 70 (default)
Player theatre 71
Loading...