Panasonic Viera TX-26LXD600A, Viera TX-32LXD600A Operating Instructions Manual

IDTV
123 456 789
0
TEXT
DVB
Analogue
INFO
EXIT
TV/AV
SD REC
STTL INDEX HOLD
ASPECT MUTE
MENU
MULTI PIP
POWER
RGYB
Operating Instructions
WIDE LCD TV
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
TQBC2118-1
Printed in Japan MBS0706S1076
TX-26LXD600A TX-32LXD600A
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identifi cation in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Model No.
Matsushita Electric Industrial Co., Ltd.
Web Site : http://panasonic.net/
© 2006 Matsushita Electric Industrial Co., Ltd. All Rights Reserved.
WARRANTY - Australia only
1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or it’s Authorised Service Centre will perform necessary service on the product without charge for parts or labour if, in the opinion of Panasonic, the product is found to be faulty within the warranty period.
2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors or Dealers and only where the products are used and serviced within Australia or it’s territories. Warranty cover only applies to service carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when warranty service is requested.
3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers normal domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems, thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised alterations), exposure to abnormally corrosive conditions or any foreign object or matter having entered the product.
4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:
(a) Video or Audio Tapes (d) Cabinet Parts (g) Microwave Oven cook plates. (b) Video or Audio Heads and Stylii resulting (e) User replaceable Batteries (h) Kneader mounting shaft unit from wear and tear in normal use (f) Thermal Paper, Toner/Ink Cartridges, (bread bakery) (c) Shaver Heads or Cutters Drums, Developer, Film (Ink/Ribbon), Film Cartridge, Printer Heads
5. If warranty service is required you should:
• Telephone Panasonic’s Customer Care Centre on 132600 or visit our website and use the Service Centre Locator for the name/address of
the nearest Authorised Service Centre.
• Send or bring the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase date.
Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you.
• Note that home or pick-up/delivery service is available for the following products in the major metropolitan areas of Australia or the normal
operating areas of the nearest Authorised Service Centres: (a) Picture tube (CRT) based Television Receivers (screen (b) Convection/Combination Microwave Ovens sizes greater than 66cm); Rear Projection TV’s; Plasma/LCD (c) Whiteboard (except portable type) televisions / displays (screen size greater than 103 cm)
6. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or re-installation of a
product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of and do not extend to, and exclude, any
damage or loss occurring by reason of, during, associated with, or related to such installation, de-installation, re-installation or transit. Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however, coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator. Unless otherwise specified to the consumer the benefits conferred by this express warranty are additional to all other conditions, warranties, guarantees, rights and remedies expressed or implied by the Trade Practices Act 1974 and similar consumer protection provisions contained in legislation of the States and Territories and all other obligations and liabilities on the part of the manufacturer or supplier and nothing contained herein shall restrict or modify such rights, remedies, obligations or liabilities. November 2005
THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)
SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES
Panasonic Australia Pty. LimitedPanasonic Australia Pty. Limited
ACN 001 592 187 ABN 83 001 592 187
Locked Bag 505, Frenchs Forest, NSW 2086
www.panasonic.com.au
If you require assistance regarding warranty conditions or any other enquiries,
please visit the Panasonic AustraliaPanasonic Australia website
www.panasonic.com.auwww.panasonic.com.au or by phone on 132 600
If phoning in, please ensure you have your operating instructions available.
PRO-031-F01 Issue: 3.0 23-11-2005
2
3
Viewing Advanced FAQs, etc.Quick Start Guide
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
media excitement
Contents
Safety Precautions ······································ 4 (Warning / Caution)
Notes ··························································· 5
Maintenance ··············································· 5
Be Sure to Read
Advanced Features
How to Use Menu Functions ····················· 18 (picture, sound quality, etc.)
Advanced DVB Settings (DVB) ················· 20
Editing and Setting Channels (DVB) ········· 22
Editing and Setting Channels (Analogue)
··· 24
Owner ID
···················································· 26
Displaying PC Screen on TV ·····················27
Watching SD Card (Videos and photos) ···28
Recording a Programme on SD Card ·······30
External Equipment ··································· 32 (Control with HDMI / Connections)
Basic Features
Watching TV ·············································· 10
Using TV Guide (DVB) ······························ 12
Watching Videos and DVDs ······················ 14
Viewing Teletext ········································ 16
Enjoy your TV!
Technical Information ································ 36
FAQs ·························································41
SD Card: On screen messages ················45
Licence ······················································ 46
Specifi cations ············································ 47
WARRANTY ··············································48
FAQs, etc.
Accessories / Options
·········· 6
Identifying Controls
··············· 7
Connection
································ 8
Auto Tuning
······························· 9
Quick Start Guide
Enjoy rich multi-media
Receive terrestrial digital services using an integrated (Digital Video Broadcasting) tuner Sharp pictures with HDMI terminal Create home theatre and DVD recorder link-ups with
"Control with HDMI" without complicated settings!
Camcorder
Amplifi er with Speaker system
VCR
DVD player
DVD recorder
Personal
computer
Set top box
SD memory card
4 5
Safety Precautions
Using an unauthorized stand or other fi xtures may make the TV shaky, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use optional stands / mounts (p. 6).
Use only the dedicated stands /
mounting equipment
Handling the mains plug and lead
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fi re.) Ensure that the mains plug is easily accessible. Do not touch the mains plug with a wet hand. (This may cause electrical shock.) Do not damage the mains lead. (A damaged lead may cause fi re or electrical shock.)
Do not move the TV with the lead plugged in the socket outlet. Do not place a heavy object on the lead or place the lead near a high-temperature object. Do not twist the lead, bend it excessively, or stretch it. Do not pull on the lead. Hold onto the mains plug body when disconnecting lead. Do not use a damaged mains plug or socket outlet.
Warning
Do not place the TV on an unstable
surface
Maintenance
Display panel
Cabinet
Mains plug
Daily care: Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or water containing a small amount of neutral detergent. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Daily care: Wipe the surface clean using a soft dry cloth. Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
The surface of the display panel has been specially treated and may be easily damaged. Do not tap or scratch the surface with your fi ngernail or other hard object.
Use care not to subject the surface to bug repellent, solvent, thinner, or other volatile substances (this may degrade surface quality).
Caution
Use care not to subject the TV's surfaces to detergent. (A liquid inside the TV could lead to product failure.)
Use care not to subject surfaces to bug repellent, solvent, thinner, or other volatile substances (this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
Keep liquids away from the TV
To prevent damage which may result in fi re or shock hazard, do not expose this appliance to dripping or splashing. Do not place containers with water (fl ower vase, cups, cosmetics, etc.) above the TV. (including on shelves above, etc.)
Do not remove covers NEVER modify the TV yourself
(High-voltage components may cause serious electrical shock.)
Have the TV checked, adjusted, or repaired at your local Panasonic dealer.
Do not place foreign objects inside the TV
Do not let metal or fl ammable objects drop into the TV through the air vents (fi re or electrical shock may result).
Do not expose to direct sunlight and other sources of heat
Avoid exposing the TV to direct sunlight and other sources of heat. To prevent fi re never place any type of candle or naked fl ame on top or near the TV.
If you fi nd any abnormality, remove the mains plug immediately!
AC 220-240 V 50 / 60 Hz
Blocked ventilation by curtains, etc. may cause overheating, fi re or electrical shock.
Allow suffi cient space around the
TV for radiated heat
10
10
6
10 10
(Cleaning an energized TV may cause electrical shock.)
When cleaning the TV, remove the
mains plug
When TV will not be used for a
long time, remove the mains plug
(cm)
Caution
Do not block the rear air vents
Notes
This TV will still consume some power even in the Off mode, as long as the mains plug is still connected to a live socket outlet.
Electronic equipment In particular, do not place video equipment near the TV (electromagnetic interference may distort images / sound). Equipment with an infrared sensor This TV also emits infrared rays (this may affect
operation of other equipment).
Keep the TV away from these equipment
Adjust the LCD panel to your desired
angle
(View from the top)
6
7
Quick Start Guide
123 456 789
0
DVB Analogue
IDTV
123 456 789
0
REC
NORMALIZE
POWER
VCR DVD
TEXT
DVB
Analogue
INFO
GUIDE
EXIT
TV/AV
SD REC
STTL INDEX HOLD
ASPECT MUTE
MENU
MULTI PIP
POWER
RGYB
L/MONO
AUDIO
VIDEOS VIDEO
AV4 IN
R
Batteries for the Remote Control Transmitter
(2)
R6 (AA)
Identifying ControlsAccessories / Options
Remote Control Transmitter
N2QAYB000039
Power lamp
Standard accessories
Identifying Controls
Accessories / Options
Check that you have the accessories and items shown
Standby: red On: green
( )
Operating Instructions
Switches TV to On or Standby
(On / Off switch in On position)
Sound mute On / Off
Changes aspect ratio (p. 10)
TV Guide (p. 12) (DVB)
Selects services in sequence
Teletext
(p. 16)
Select / OK
Changes the sound track, if programme has multiple audio tracks (DVB) Stereo / Bilingual Sound Selection
(p. 39) (Analogue)
Volume
Teletext Index (p. 17)
Still Picture (p. 10)
Coloured buttons
(used for various functions) (for example, see p. 12)
EXIT (Returns to TV screen)
Switches TV/AV
(To watch videos or DVDs) (p. 14)
VCR / DVD operations (p. 15)
MENU
Press to access the Picture, Sound and
Setup menus
( )
Switches DVB (digital broadcasting) / Analogue mode (p. 10)
SD menu (p. 28 and p. 31)
SD Recording (p. 30)
Multi Window (p. 10)
Switches SRS TruSurround XT On/Off
(p. 19)
Changes service (p. 10)
Guarantee
Installing remote's batteries
1
Pull open
Hook
2
Note the correct polarity (+ or -)
Close
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
Optional accessories
Wall-hanging bracket
TY-WK32LX20W
Caution
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced contractor to secure the wall-hanging brackets.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
Function select
Volume / Contrast / Brightness / Colour / Sharpness
/ NTSC-Tint (Tint) / Bass / Treble / Balance / Tuning mode (p. 24)
( )
Store setting (p. 24)
Used to store tuning and other function settings
( )
On / Off switch
Backlight Automatic Tracking System sensor
(senses brightness to adjust picture quality in "Auto" Viewing mode) (p. 18)
Remote control signal receiver
Swing up the door at "PULL".
Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On.
Switches TV/AV
Headphones jack (p. 34)
AV4 terminals (p. 34)
SD CARD slot (p. 29)
Normalizes (p. 18)
(Resets settings)
Programme Information (p. 10)
Subtitles
Showing subtitles (p. 10) Viewing a favourite teletext page (p. 17)
( )
8
9
Quick Start Guide
Exit
Adjust
Select
Return
Bass Treble Balance Headphone volume Mode SRS TruSurround XT
Sound menu
Music Off
MONITOR
OUT
AV1INAV2INAV3
IN
COMPONENT
MONO MONO MONO
Y
PB/CB
PR/CR
RF OUT
RF IN
AUDIO
OUT
VIDEO
OUT
Please Wait !
DVB Auto Tuning
Prog. RF Ch Service Name Net ID. TS ID. Quality
This will take about 3 mins.
2
3
4
7
9
2
3
4
7
9
12302
12302
12302
12302
12302
4158
4158
4158
4158
4158
9
9
9
9
9
ABC TV Sydney
SBS DIGITAL 1
FTV guide
7 Digital
NINE DIGITAL
696
Exit
012345678 9
Y ou now have the opportunit y to enter your details an d help the police crack crim e see instruction boo k
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
Exit
Select character
Change character
Store Owner ID
New South Wales / Australian Capital Territory Victoria
Select State / Territory
Queensland South Australia Western Australia
Tasmania
Northern Territory
Select
Start Tuning
Auto Tuning
Connection
Connection
External equipments and cables shown in this manual are not supplied with this TV. Please ensure that the unit is disconnected from the mains before attaching or disconnecting any leads.
Need help with operations?
(example: Sound menu)
On-screen operation guide will help you.
select
Note
Do not put the Coaxial cable close to the mains lead to avoid noise.
Do not place the Coaxial cable under the TV.
To obtain optimum quality picture and sound, an Aerial, the correct cable (75
Ω
coaxial) and the correct terminating
plug are required.
If a communal Aerial system is used, you may require the correct connection cable and plug between the wall Aerial socket and the TV.
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct Aerial system for your particular area and the accessories required.
Any matters regarding Aerial installation, upgrading of existing systems or accessories required, and the costs incurred, are the responsibility of you, the Customer.
75 Ω Coaxial cable
Rear of the TV
VHF / UHF aerial
Watching TV
To record TV programmes
DVD Recorder or VCR
Rear terminal portion (enlarged view)
Mains lead
(Connect after all the other connections.)
1. Insert the claws (at 3 points) at the bottom end.
2. Push until it clicks.
Removal Fitting
1. Push down hooks and pull the cover slightly towards yourself to disengage the claws (at 3 points).
2. Slowly pull out in the downward direction.
Cable cover removal and fi tting
Turn the TV On with the On / Off switch
Usable characters and numbers
1
Auto Tuning
Following the on-screen operation guide, enter your own choice of PIN number, name, etc.
For detailed procedures
"Owner ID" (p. 26)
Make a note of the PIN number in case you forget it.
Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer.
Input owner ID
DVB Auto Tuning is now complete and your TV is ready for viewing.
When inputting owner ID later
EXIT
From now on you can use the remote control to turn On the TV or turn the TV to standby mode.
4
If you input the ID later
"Owner ID" (p. 26)
Auto Tuning will start to search for digital TV services and store them.
To check service list at-a-glance
TV Guide (DVB) (p. 12)
To edit analogue channels
"Programme edit" (p. 24)
The sorted service order depends upon the TV signal, the broadcasting system and reception conditions.
Note
If tuning have failed, perform "Auto Tuning" (p. 22).
If it is not the fi rst time to perform Auto Tuning, all previous tuning data will be erased.
Select your state
2
Start Auto Tuning
3
This TV has been pre-tuned by the factory to the following Analogue TV channels.
If your location does not receive these channels, perform "Auto tuning" (p. 24).
start
or
Programme No. Channel No.
110 22 328 77 99
31 31
10
11
Viewing
123 456 789
0
POWER
HOLD
HOLD
HOLD
ASPECT
MULTI PIP
RGYB
STTL
STTL
STTL
DVB
Analogue
IDTV
INFO
Corontation Street 9:00 am - 11:00 am
Select FAV list
1 TEN Digital
10:30 am
Rating: PG
TEXT
STTL
Now
All Services
123 456 789
0
POWER
Corontation Street 9:00 am - 11:00 am
Select FAV list
1 TEN Digital
10:30 am
Rating: PG
TEXT
STTL
Now
All Services
Watching TV
1
Select a service
up
down
3
Turn power on
HOLD
Freeze / unfreeze picture
Hold
Other Useful Functions (Operate after )
On / Off switch on TV should be On.
(for about 1 second)
Watching TV
Change aspect ratio
or
Watch TV, DVD, etc. in multi window
Volume
16 : 9
ASPECT
Each press changes the mode. 16:9 / 14:9 / Just / 4:3 / 4:3 Full (HD signal only) / Zoom1 / Zoom2 / Zoom3
Change the aspect ratio (p. 37)
While the bar is displayed
R G
( )
2
DVB
Analogue
DVB Analogue
2
Select DVB (Digital Video Broadcasting) or Analogue
Information banner
To select more than two-digit service number
e.g. 39
3
9
e.g. 390 3 9
0
(in a short time)
Select a channel using Information banner (DVB)
Select a service using TV Guide (DVB)
"Using TV Guide" (p. 12)
INFO
select service
watch
Display subtitles
Display / hide subtitles (if available)
Display information banner
INFO
Display programme information
In DVB:
In Analogue:
Displays / hides status information. Displayed information: For example, Programme number, Channel number, Stereo mode, Aspect mode, Sound menu, Picture menu.
Service
Programme
Programme Start / Finish time
Current time
Displayed the rating information (p. 36)
Current favourites list
Displayed when programme contains Dolby Digital and MPEG audio sound
After you have defi ned a Fav List,
press
B
to change Fav List
To set display timeout
"Banner Display Timeout" (p. 20)
To hide
EXIT
Appears also when changing service.
Information of another service
Information on next programme To watch the programme listed in the banner Information banner operation
INFO
SwapSource
2
AV1
SwapSource
2
AV1
SwapSource
2
AV1
SwapSource
2
AV1
R
R RB
MULTI PIP
View in multi window (p. 37)
Main screen
Colour bar Sub
screen
To change the layout, etc. fi rst show the colour bar
MULTI PIP
To change the layout R
G
To swap
B
To change the source of sub screen
Y
To return to the normal single-screen view
MULTI PIP
Remote control operations apply to the main screen.
This is the same as turning the teletext on and selecting P801.
Corontation Street 9:00 am - 11:00 am
Select FAV list
1 TEN Digital
10:30 am
Rating: PG
TEXT
STTL
Now
All Services
Displayed if programme has teletext
Displayed if programme has subtitle
(in a short time)
1st press Display banner
2nd press Banner + programme synopsis
3rd press Exit
In DVB mode, aspect ratio is fi xed at 16:9.
12
13
Viewing
IDTV
RGYB
DVB
Analogue
INFO
All Services
Free TV
Pay TV
Profile
Profile
Profile
Category
All Services
All Services
Fav List 1
Fav List 2
Fav List 3
Fav List 4
Favourites
All Services
Current Affairs
Education/Information
Infotainment
Special
Comedy
Drama
Documentary
All Types
Movies
News
Entertainment
Sport
Children’s
Music
Arts/Culture
Program type
All Types
Exit
Info
Exit Select Programme
Select Service
View Programme
Program type Favourites
+24 Hr
DVB TV Guide
Wed 12/05/04 09:46 am
Wed 12th May
Favourites
Category
All Services
Page up
Page down
Program type
All Services
All Types
9:30 am - 10:00 am
10:00 am - 10:30 am
10:30 am - 11:00 am
11:00 am - 11:30 am
11:30 am -
1:00 pm
1:00 pm - 3:00 pm
3:00 pm - 3:10 pm
3:10 pm - 4:00 pm
Eastender
DlY SOS
The Bill
Red Cap
Live junction
POP 100 Cinema info
Sports
1 TEN Digital
2 ABC TV Sydney
3 SBS DIGITAL 1 4 FTV guide
DVB
Analogue
Service
To previous day
R
To next day
G
To view a programme list of the selected favourites list
B
To view a programme list of the selected type
Y
Using TV Guide
select
favourites list
TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of programmes currently broadcast and future broadcasts over the next seven days (depending on the broadcaster).
TV Guide date
Programme
View TV Guide
select
type
Current date and time
(Favourites list)
(Type list)
To list favourite services (p. 20)
To return to TV
EXIT
view
view
Select DVB mode
(Displays by time)
2
1
Using TV Guide (DVB)
(DVB mode only)
Note
When this TV is turned on for the fi rst time, or the TV is switched off for more than a week, it may take some time before the TV Guide is completely shown.
Watch the programme
select
Select the programme now on the air
(TV screen)
watch
Other useful functions (Operate after )
View details of the programme
Exit
Exit
Return to List
View Programme
DVB TV Guide
Thu 05/08/04 10:49 am
INFO
Select the programme
select
Details
To return to the start page
INFO
View details
14
15
Viewing
VCR DVD
VCR / DVD switch
Select VCR to operate Panasonic VCR or DVD equipment Select DVD to operate Panasonic DVD equipment or Player theatre
POWER
Standby
Set to Standby mode / Turn on
Play
Playback VCR / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, review (during playback) DVD: Skip to the previous track or title Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, cue (during playback) DVD: Skip to the next track or title Press and hold to search forward
Pause
Pause / Restart DVD: Press and hold for slow-motion play
Programme Up, Down
Select programme
REC
Record
Start recording
HDMI1/2
123 456 789
0
REC
POWER
VCR DVD
TV/AV
RGYB
B
R
GR Y G Y B
TV/AV
Watching Videos and DVDs
With the equipment turned On
Select the external input
1
It is possible to connect a variety of external equipment to the TV. Once the equipment is connected, use the following procedure to view the input. To connect the equipment (p. 34)
2
Select the connector
connected to the equipment
(AV mode screen)
Note
If the external equipment has an aspect adjustment function, set to "16:9".
For details, see the manual of the equipment or ask your local dealer.
To return to TV
TV/AV
example: AV1
R
PC B
Y
Displays the selected connector
Watching Videos and DVDs
AV1 AV2 AV3 AV4 PC
HDMI1/
HDMI2
When colour bar disappears Press any coloured buttons
You can also select the connector using the TV/AV button on the front panel of the TV.
Press the button repeatedly until you reach the connector to view.
Panasonic equipment connected to the TV can be directly operated with the remote control.
Note
After setting, execute operation confi rmation.
The respective VCR / DVD code is turned to the default when battery has been exchanged. Set it again.
Depending on the model, operation may not be possible.
The remote control will be available for various Panasonic equipment with the following settings.
VCR DVD
123 456 789
0
Switch to select VCR or DVD you want to change
Press and hold
POWER
while
operating
Enter the code below (two digit code)
Press
VCR
Equipment Code
VCR 10 (default) DVD 11
DVD
Equipment Code
DVD 70 (default)
Player theatre 71
Loading...
+ 16 hidden pages