Panasonic viera TH-P54V20A Operating Instruction

Panasonic Warranty

1. The product is warranted for 12 months from the date of purchase. Subject to the conditions of this warranty Panasonic or its
Authorised Service Centre will perform necessary service on the product without charge for parts or labour if, in the opinion of
Panasonic, the product is found to be faulty within the warranty period.

2. This warranty only applies to Panasonic products purchased in Australia and sold by Panasonic Australia or its Authorised Distributors
or Dealers and only where the products are used and serviced within Australia or it's territories. Warranty cover only applies to service
carried out by a Panasonic Authorised Service Centre and only if valid proof of purchase is presented when warranty service is
requested.

3. This warranty only applies if the product has been installed and used in accordance with the manufacturer’s recommendations (as
noted in the operating instructions) under normal use and reasonable care (in the opinion of Panasonic). The warranty covers
normal domestic use only and does not cover damage, malfunction or failure resulting from use of incorrect voltages, incorrect
installation, accident, misuse, neglect, build-up of dirt or dust, abuse, maladjustment of customer controls, mains supply problems,
thunderstorm activity, infestation by insects or vermin, tampering or repair by unauthorised persons (including unauthorised
alterations), introduction of sand, humidity or liquids, commercial use such as hotel, office, restaurant, or other business or rental
use of the product, exposure to abnormally corrosive conditions or any foreign object or matter having entered the product.

4. This warranty does not cover the following items unless the fault or defect existed at the time of purchase:

(a) Cabinet Part(s) (e) DVD Video, Blu-ray, or Recordable Discs
(b) Video or Audio Tapes (f) Video / Audio Heads from wear and tear in normal use
(c) SD cards or USB devices (g) Information stored on Hard Disk Drive, USB stick or SD card
(d) User replaceable Batteries (h) DTV reception issues caused by TV Aerial / Cabling / Wall socket(s) etc

5. Some products may be supplied with Ethernet connection hardware. The warranty is limited on such products and will not cover

(a) Internet and or DLNA connection / setup related problems
(b) Access fees and or charges incurred for internet connection
(c) The use of incompatible software or software not specifically stipulated in the product operations manual; and

(d) Any indirect or consequential costs associated with the incorrect use or misuse of the hardware, its connection to the internet

or any other device.

6. If warranty service is required you should:

• Telephone Panasonic’s Customer Care Centre on 132600 or visit our website and use the Service Centre Locator for the

name/address of the nearest Authorised Service Centre.

•

Send or bring the product to a Panasonic Authorised Service Centre together with your proof of purchase receipt as a proof of purchase
date. Please note that freight and insurance to and / or from your nearest Authorised Service Centre must be arranged by you.

7. The warranties hereby conferred do not extend to, and exclude, any costs associated with the installation, de-installation or
re-installation of a product, including costs related to the mounting, de-mounting or remounting of any screen, (and any other
ancillary activities), delivery, handling, freighting, transportation or insurance of the product or any part thereof or replacement of
and do not extend to, and exclude, any damage or loss occurring by reason of, during, associated with, or related to such
installation, de-installation, re-installation or transit.

Panasonic Authorised Service Centres are located in major metropolitan areas and most regional centres of Australia, however,
coverage will vary dependant on product. For advice on exact Authorised Service Centre locations for your product, please telephone
our Customer Care Centre on 132600 or visit our website and use the Service Centre Locator.

Unless otherwise specified to the consumer the benefits conferred by this express warranty are additional to all other conditions,
warranties, guarantees, rights and remedies expressed or implied by the Trade Practices Act 1974 and similar consumer protection
provisions contained in legislation of the States and Territories and all other obligations and liabilities on the part of the manufacturer
or supplier and nothing contained herein shall restrict or modify such rights, remedies, obligations or liabilities.

Feb 2010

THIS WARRANTY CARD AND THE PURCHASE DOCKET (OR SIMILAR PROOF OF PURCHASE)

SHOULD BE RETAINED BY THE CUSTOMER AT ALL TIMES

If you require assistance regarding warranty conditions or any other enquiries,

please contact our Customer Care Centre via the Panasonic website www.panasonic.com.au or

by phone on 132 600. If phoning in, please ensure you have your operating instructions available.

Locked Bag 505, Frenchs Forest, NSW 2086

PRO-031-F11 Issue: 2.0 18-02-2010

Customer’s Record

The model number and serial number of this product may be found on its rear panel. You should note
the model number and the serial number in the space provided below and retain this book, plus your
purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft
or loss, and for Warranty Service purposes.

Model Number Serial Number

Web Site: http://panasonic.net

© Panasonic Corporation 2010

Panasonic Australia Pty. Limited

ACN 001 592 187 ABN 83 001 592 187

RQA0245

Printed in Japan

M0510-1050

Plasma Television

TH-P54V20A

Thank you for purchasing this Panasonic product. Please read these
instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.

English

TQBC2541-1

Experience an amazing level of
multimedia excitement

Receive digital terrestrial services using an integrated Digital TV tuner
Sharp pictures with HDMI terminal
Create home theatre and DVD recorder link-ups with “VIERA Link”
without complicated settings!

Enjoy rich multimedia

VCR

Amplifier with

Speaker System

DVD Recorder

Notice about Digital TV Functions

The MPEG-4 AVC feature was designed to specifications as we know them today. This



specification may be subject to future changes beyond our control that may not guarantee the
decoding of such services.

DVD player

SD Card

USB HDD

Camcorder

Personal
computer

Set top box

February 2010

The recording and playback of content on this or any other device may require permission from the
owner of the copyright or other such rights in that content. Panasonic has no authority to and does
not grant you that permission and explicitly disclaims any right, ability or intention to obtain such
permission on your behalf. It is your responsibility to ensure that your use of this or any other device
complies with applicable copyright legislation in your country. Please refer to that legislation for more
information on the relevant laws and regulations involved or contact the owner of the rights in the
content you wish to record or playback.

This product is licensed under the AVC patent portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or
(ii) decode AVC Video that was encoded by a consumer engaged in a personal and non-commercial
activity and/or was obtained from a video provider licensed to provide AVC Video. No license is
granted or shall be implied for any other use. Additional information may be obtained from MPEG

2

LA, LLC. See http://www.mpegla.com.

Standard accessories

Check that you have the accessories and
items shown

Remote Control

N2QAYB000496



Batteries for the

Remote Control (2)
R6 (AA)



Ferrite core (2)

J0KG00000014



p. 67

SD CARD

Pedestal p. 6

Mains Lead

p. 8

Fall-prevention

parts

Operating
Instructions with
Warranty statement

p. 7

Contents

Be sure to Read

Safety Precautions  ···································· 4

(Warning / Important Installation Notices)

Quick Start Guide

Accessories / Options  ······························· 6

Basic Connection

 ······································ 8

Identifying Controls

 ································· 10

Auto Tuning

 ············································· 12

Basic Features

Watching TV  ············································ 14

Using TV Guide (Digital TV mode)

 ·········· 17

Viewing Teletext

 ······································ 18

Watching External inputs

 ························ 20

Guide

Quick Start

BasicAdvanced

Use the Ferrite cores
to comply with the
EMC standard.

This product contains possibly dangerous parts
(such as plastic bags), which can be breathed in
or swallowed by young children accidentally. Keep
these parts out of reach of young children.

Inserting and removing remote’s batteries

1

Pull open

Hook

Close

2

Note the correct
polarity (+ or -)

Incorrect installation may cause battery



leakage and corrosion, resulting in damage
to the remote control.
Do not mix old and new batteries.



Do not mix different battery types (such as



alkaline and manganese batteries).
Do not use rechargeable (Ni-Cd) batteries.



Do not burn or breakup batteries.



Batteries must not be exposed to excessive
heat such as sunshine, fire or the like.
Do not disassemble or modify the remote



control.

Advanced Features

How to Use VIERA TOOLS  ····················· 22

How to Use Menu Functions

 ··················· 23

Tuning and Editing Channels

 ·················· 30

Advanced Picture Settings

 ······················ 34

Child Lock

 ··············································· 36

Input Labels

 ············································ 37

Shipping Condition (Reset settings)

 ········ 38


Updating the TV Software (Digital TV mode)
USB HDD Recording

 ······························ 40

Using Media Player

 ································· 44


Using Network Services (DLNA / VIERA CAST)
VIERA Link Functions

 ····························· 61

VIERA Link “HDAVI Control



External Equipment

 ································· 66

TM

” ················ 64

····· 39

Technical

Technical Information  ······························ 68

Maintenance

 ··········································· 74

FAQs

 ······················································· 75

Licence

 ···················································· 78

Specifications

 ·········································· 79

WARRANTY

 ············································ 80

···· 52

Technical

3

Safety Precautions

Warning

Handling the mains plug and lead

Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat



and cause fire.)
Ensure that the mains plug is easily accessible.



Ensure the earth pin on the mains plug is securely connected to prevent electrical shock.



Do not touch the mains plug with a wet hand. (This may cause electrical shock.)



Do not use any mains lead other than that provided with this TV. (This may cause fire or



electrical shock.)
Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)



• Do not move the TV with the lead plugged in the socket outlet.

• Do not place a heavy object on the lead or place the lead near a high-temperature object.

• Do not twist the lead, bend it excessively, or stretch it.

• Do not pull on the lead. Hold onto the mains plug body when disconnecting lead.

• Do not use a damaged mains plug or socket outlet.

AC 220 - 240 V

If you find any
abnormality, remove
the mains plug
immediately!

50 / 60 Hz

4

Power source / Installation

This TV is designed for:

• AC 220 - 240 V, 50 / 60 Hz

• Indoor use

Do not remove covers and NEVER modify
the TV yourself

Do not remove the rear cover as live parts



are accessible when it is removed. There
are no user serviceable parts inside. (High­voltage components may cause serious
electrical shock.)
Have the TV checked, adjusted, or repaired



at your local Panasonic dealer.

Do not expose to rain or excessive
moisture

To prevent damage which might result in



electric shock or fire, do not expose this TV
to rain or excessive moisture. This TV must
not be exposed to dripping or splashing
water and objects filled with liquid, such as
vases, must not be placed on top of or above
the TV.

Do not expose to direct sunlight and
other sources of heat

Avoid exposing the TV to direct sunlight and
other sources of heat. To prevent fire never
place any type of candle or naked flame on
top or near the TV.

Do not insert foreign objects into the TV

Do not allow any objects to drop into the TV



through the air vents. (Fire or electrical shock
may result.)

Do not place the TV on sloped or
unstable surfaces

The TV may fall off or tip over.



Use only the dedicated pedestals /
mounting equipment

Using an unapproved pedestal or other



fixtures may make the TV unstable, risking
injury. Be sure to ask your local Panasonic
dealer to perform setup.
Use approved pedestals (p. 6) / wall-hanging



brackets (p. 7).

Do not allow children to handle SD Card

As with any small object, SD Cards can be



swallowed by young children. Please remove
SD Card immediately after use and store out
of reach of children.

Important Installation Notices

■

Install TV on a stable surface

If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to
falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

Using cabinets or stands recommended by the manufacturer of the television.



Only using furniture that can safely support the television.



Ensuring the television is not overhanging the edge of the supporting furniture.



Not placing the television on tall furniture (for example, cupboards or bookcases) without



anchoring both the furniture and the television to a suitable support.
Not standing the televisions on cloth or other materials placed between the television and



supporting furniture.
Educating children about the dangers of climbing on furniture to reach the television or its



controls.

■

When cleaning the TV, remove the mains plug

Cleaning an energized TV may cause electrical shock.



■

When the TV is not going to be used for a long period of time, remove the mains plug

This TV will still consume some power even in the Off mode, as long as the mains plug is still



connected to a live socket outlet.

■

Transport only in upright position

Transporting the TV with its display panel facing upward or downward may cause damage to the



internal circuitry.

■

Allow sufficient space around the TV for radiated heat

10

10

10

7

When using the pedestal, keep a space between the bottom



of the TV and the surface where the TV is set.
In case of using Wall-hanging bracket, follow the manual of it.



(cm)

Minimum distance

■

Do not block the rear air vents

Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or



electrical shock.

■

Do not apply strong force or impact to the display panel

This may cause damage resulting in injury.



■

Do not expose your ears to excessive volume from the headphones

Irreversible damage can be caused.



■ The TV is heavy. Handle the TV by 2 or more people.

Support as shown to avoid injury by the TV tipping
or falling.

■

Auto power standby function

If no signal is received and no operation is performed in Analogue TV mode for 30 minutes, the



TV will automatically go to standby mode.

■

Keep the TV away from these types of equipment

Electronic equipment



In particular, do not place video equipment near the TV. Electromagnetic interference may distort
images / sound.
Equipment with an infrared sensor



This TV also emits infrared rays. This may affect operation of other equipment.

Do not display a still picture for a long time

This causes the image to remain on the plasma screen (“image retention”).
This is not considered a malfunction and is not covered by the warranty.
Typical still images

Programme number and other logos



Image displayed in “4:3” mode
Video game



Computer image



To prevent image retention, contrast is lowered automatically after a few minutes if no signals are
sent or no operations are performed. (p. 75)

5

Accessories / Options

Attaching the pedestal

Do not disassemble or modify the pedestal.

Otherwise the TV may fall over and become damaged, and personal injury may result.



Do not use the pedestal for any other TV or displays.

Otherwise the TV or the display may fall over and become damaged, and personal injury may result.



Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal while it is physically damaged, personal injury may result. Contact your



nearest Panasonic dealer immediately.

During set-up, make sure that all screws are securely tightened.

If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal



will not be strong enough to support the TV, and it might fall over and become damaged, and
personal injury may result.

Ensure that the TV does not fall over.

If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over



and personal injury may result.

Two or more people are required to install and remove the TV.

If two or more people are not present, the TV may be dropped, and personal injury may result.



Assembly screw (4)

(silver)

M5 × 25 M5 × 30

Assembling the pedestal

Use the four assembly screws to fasten the
left and right poles to the base securely.

Make sure that the screws are securely



tightened.
Forcing the assembly screws the wrong way



will strip the threads.
“L” or “R” mark is stamped on the bottom of



the pole.

Pole

Pole

Assembly screw (4)

(black)

Front

Pole Base

Securing the TV

Use the assembly screws to fasten securely.

Make sure that the screws are securely



tightened.
Carry out the work on a horizontal and level surface.

Arrow mark

Hole for pedestal
installation

6

[View from the bottom]

Preventing the TV from falling over

This TV could fall over if it is pushed, pulled or knocked down.
We therefore recommend the TV is secured to the furniture as illustrated.

This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee



protection in all cases.

Fall-prevention parts

Band (2)

Screw (2) Wood screw (2)

Clamp (2)

Securing to a furniture

Fix pedestal and furniture together with band.

This image is for illustrative purposes only.

Optional accessories

Please contact your nearest Panasonic dealer to purchase the recommended optional accessories.
For additional details, please refer to the manual of the optional accessories.

Wireless LAN Adaptor

DY-WL10E-K



To use the Wireless LAN Adaptor, your network needs to have a Wireless Access Point.



It is recommended to use the Wireless LAN Adaptor with the extension cable.
To avoid radio wave interface, keep the TV away from the devices such as other



wireless LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz
signals when using the Wireless LAN Adaptor. Otherwise malfunction may occur.
This optional accessory may not be available in your market region.



Additional information for Wireless LAN Adaptor and Wireless Access Point



may be found at the following web site. (English only)
http://panasonic.jp/support/global/cs/tv/

Guide

Quick Start

Accessories / Options

Communication Camera

TY-CC10W



This camera can be used on VIERA CAST (p. 60).



Please also read the manual of the camera.



Depending on the area, this optional accessory may not be available.



For details, consult your local Panasonic dealer.

Wall-hanging bracket

TY-WK5P1RW



Holes for wall-hanging
bracket installation

Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself have the risk



of personal injury and product damage. In order to maintain the unit’s performance and safety, be
absolutely sure to ask your dealer or a licensed contractor to secure the wall-hanging brackets. Any
damage caused by installing without a qualified installer will void your warranty.
Carefully read the instructions accompanying optional accessories, and be absolutely sure to take



steps to prevent the TV from falling off.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause



product damage.
Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or



pipes in the wall before hanging bracket.
To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.



Rear of the TV

500mm

300mm

Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)

Depth of screw:
minimum 15 mm,
maximum 30 mm

[View from the side]

7

Basic Connection

External equipment and cables shown are not supplied with this TV.
Please ensure that the TV is disconnected from the mains socket before attaching or disconnecting
any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket
outlet first.

Connecting aerial

TV only

Rear of the TV

AC 220 - 240 V,
50 / 60 Hz

Mains lead (supplied)

Push until both side
tabs click

To remove from the TV:



tabs

Press both tabs and pull on
mains connector to release

Make sure that
the mains lead is
securely fixed.

Aerial

RF cable

Do not put the RF cable close to the mains lead to avoid noise.



Do not place the RF cable under the TV.



To obtain optimum quality picture and sound, an aerial, the correct cable (75  coaxial) and the



correct terminating plug are required.
If a communal aerial system is used, you may require the correct connection cable and plug



between the wall aerial socket and the TV.
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct



aerial system for your particular area and the accessories required.
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and



the costs incurred, are the responsibility of you, the Customer.
VIERA Link connection



Read the manual of the equipment, too.



Other equipment connection  p. 66, 67, 76

p. 61

8

TV, DVD Recorder or VCR

Connecting DVD Recorder / VCR

Rear of the TV

AC 220 - 240 V,
50 / 60 Hz

Mains lead (supplied)

Guide

Quick Start

Aerial

Basic Connection

RCA cable

DVD Recorder or VCR

RF cable

RF cable

9

Identifying Controls

Remote control

14
15

1

2

3

4

5

6

7

8

9

10

11

12

13

1 Standby On / Off switch

Switches TV On or Off standby



2 Aspect (p. 16)

Changes aspect ratio from Aspect



Selection list
Also possible by pressing this button
repeatedly until you reach the desired aspect

3 Main Menu (p. 23)

Press to access Picture, Sound and Setup



Menus

4 Channel / Programme Information (p. 15)

Displays channel and programme



10

information

SD CARD

16
17

18

19

20

21

22

23
24

25

26

27

5 VIERA TOOLS (p. 22)

Displays some special feature icons and



accesses easily

6 VIERA Link (p. 61)

Accesses VIERA Link Menu



7 OK

Confirms selections and choices



Press after selecting channel positions to



quickly change programme

8 Option Menu (p. 15)

Easy setting for sound options



9 Teletext (p. 18)

Switches to teletext mode



10 Subtitles (p. 14)

Displays subtitles



11 Numeric buttons

Changes channel and teletext pages



When in Standby mode, switches TV On



12 Sound Mute

Switches sound mute On or Off



13 Volume Up / Down
14 Media Player (p. 44)

Switches to SD Card and USB device



viewing / listening mode

15 Input mode selection

TV - switches Digital TV / Analogue TV



mode (p. 14)

AV - switches to AV input mode from Input



Selection list (p. 20)

16 Stereo / Bilingual Sound Selection (p. 68)

Changes the sound track when more than



two choices are available
(Digital TV mode) (p. 15)

17 VIERA CAST (p. 60)

Displays VIERA CAST home screen



18 Exit

Returns to the normal viewing screen



19 Guide (p. 17)

Displays TV Guide



20 Cursor buttons

Makes selections and adjustments



21 Return

Returns to the previous menu / page



22 Coloured buttons

Used for the selection, navigation and



operation of various functions

23 Hold

Freeze / unfreeze picture (p. 14)



Holds the current teletext page



(teletext mode) (p. 18)

24 Index (p. 18)

Returns to the teletext index page



(teletext mode)

25 Surround (p. 26)

Switches surround sound setting



26 Channel Up / Down

Selects channel in sequence



27 Connected equipment operations (p. 21)

1 32

1 Remote control signal receiver

Do not place any objects between the TV



remote control signal receiver and remote
control.

2 C.A.T.S. (Contrast Automatic Tracking

System) sensor

Senses brightness to adjust picture quality



when “Eco Mode” in the Picture Menu is
set to “On” (p. 25)

4

5

6

7

8

9

10

11

12

TV

3 Power LED

Standby: red On: green



When using the remote control, indicates



the TV has received a command.

4 USB1 / 2 port
5 Function Select

Volume / Contrast / Brightness /



Colour / Sharpness / Tint (NTSC mode) /
Bass (“Music” or “Speech” mode in
the Sound Menu) / Treble (“Music” or
“Speech” mode in the Sound Menu) /
Balance / “Digital TV Auto Tuning” or
“Analogue TV Auto Tuning” (p. 25 - 27)

6 Increases or decreases the channel

position by one. When a function is already
displayed, press to increase or decrease the
selected function. When in standby mode,
switches TV on.

7 Changes the input mode
8 SD card slot
9 HDMI4 terminal
10 Headphone jack
11 AV4 terminals
12 Mains power On / Off switch

Switch On to turn on the TV or turn the TV



to Standby mode by the remote control.

Guide

Quick Start

Identifying Controls

Using the On Screen Displays

Many features available on this TV can be accessed via the On Screen Display menu.

Example (Sound Menu):

Sound Menu

Mode Music

Bass
Treble
Balance
Headphone Volume

Volume Correction
Speaker Distance to Wall Over 30cm
MPX

Select

EXIT
Change
RETURN

OffSurround

Stereo

Page up

Page down

1/2

0
0
0

11

0

Operation guide will help you.

How to use remote control

MENU

Open the Main Menu

Move the cursor / select the menu
item

Move the cursor / adjust levels / select
from a range of options

RETURN

EXIT

Access the menu / store settings
after adjustments have been made or
options have been set

Return to the previous menu

Exit the menu system and return to the
normal viewing screen

11

Auto Tuning

Search and store TV channels automatically.

These steps are not necessary if the setup has been completed by your local dealer.



Plug the TV into mains socket and switch On

1

You can now use the remote control to turn On the TV or



switch the TV to standby mode. (Power LED: On)

Select your area

2

POWER

ASPECT

INFO

L

A

R

E

I

V

OPTION

TEXT

MUTE

POWER

k

n

i

ghi

SD CARD

MENU

R

E

I

V

STTL

REC

INPUT

TV

T

O

A

O

L

S

Y

INDEX

abc def

jkl

tuvpqrs

SURROUND

PROGRAMME

BD/DVD

AV

EXIT

G

U

I

D

RETURN

BR G

HOLD

mno

wxyz

TV

E

Select State / Territory

New South Wales / Australian Capital Territory

Select Auto Scan Type

3

Auto Scan Type

All Channels

Digital TV Channels only

Victoria

Queensland

South Australia
Western Australia
Northern Territory

Tasmania

Auto Tuning starts

Auto Tuning

Analogue TV Scan

This will take about 6 minutes.

62

92
33

Digital TV: 4 Analogue TV: 2

Setup the wireless LAN connection

4

Start wireless LAN connection setup?

Yes No

Please connect the wireless LAN adaptor to a USB terminal.

6HCDigital TV Scan
0HC

Searching

Digital TV
Digital TV
Digital TV
Digital TV
Analogue TV
Analogue TV

01 lennahC CBBC
01 selaW oidaR CBB26
01 4E26
01 kwN nootraC26

-

-

Auto Tuning will start to search for



69
75

TV channels and store them.

ytilauQepyTemaN lennahCRF Ch

The sorted channel order
depends upon the TV signal,
the broadcasting system and
reception conditions.

For details  p. 13

Select “Home”

5

Please select your viewing environment.

Home Shop

∗

select

set

access

select

select

set

select

∗Viewing environment mode

Home : Recommended mode for viewing at home. Select “Home” for optimal picture / power

consumption. “Viewing Mode” is set as “Normal” (p. 25).

Shop : Demonstration mode to explain main features of this TV (for in-store display).

“Viewing Mode” is set as “Dynamic” (p. 25).

To return to viewing environment selection mode if you selected “Shop”

Shop

You have selected shop mode

To change viewing environment mode later on, reset all settings by accessing Shipping Condition.



RETURN

“Shipping Condition” (p. 38)

12

Auto Tuning is complete

Automatic Demo

Off On

set

Please select your viewing environment.

Home Shop

RETURN

Setup the wireless LAN connection

Setup the wireless LAN connection to enable the network service functions.

To setup the wireless LAN connection, the wireless LAN Adaptor (optional accessory) is required.



For the information about the Wireless LAN adaptor “Optional accessories” (p. 7)
Confirm the encryption key, settings and positions of your access point before starting setup. For



details, read the manual of the access point.
Please note that this TV does not support wireless public access points.



Start wireless LAN connection setup?

Yes No

Please connect the wireless LAN adaptor to a USB terminal.

Connect the Wireless LAN Adaptor to the USB 1 or 2 port

Internet

environment

You can setup the
wireless LAN connection later

“Network Setup” (p. 54)

To skip this step



EXIT

or select “No”

Connection Type

Please select network connection type.

WPS (Push button)

Search for access point

Access point

select “Yes”

access

Select the connection type

access

select

Wireless LAN Adaptor
(optional accessory)

If your access point supports WPS



(Push button), then select this option.
If not, select “Search for access point”.

WPS (Push button)

WPS(Push button)

1) Please press the ‘WPS’ button on the access
point until its light flashes.

2) When the light is flashing select ‘Connect’ on TV.

If you are unsure, please check the instruction
manual of the access point.

Search for access point

Available Access Points

SSIDNo. Wireless type Encrypt Reception

Access Point A 11n (2.4GHz)

1

Access Point B

2

Access Point C 11n (5GHz)

3

Encryption Key Setting

Connection will be made with the following settings:­SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP

Please input the encryption key.

Encryption key

Connect

11n (5GHz)

Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN Adaptor
and the access point.

Ensure that your access point supports WPS for this method.



WPS: Wi-Fi Protected Setup



TM

Access points found automatically are listed.
Select your desired access point.

access

select

To search access points again



Y

For the information of the
highlighted access point

INFO

Access the encryption key
input mode

If the selected access point is not encrypted, the confirmation screen



will be displayed. It is recommended to select the encrypted access
point.

Guide

Quick Start

Auto Tuning

Access Point Settings

Encryption key

A B C D E F G H I J K L M N
U V W X Y Z 0 1 2 3 4 5 6
a b c d e f g h i j k l m n
u v w x y z ( ) + - . * _

Access Point Settings

Encryption key is set to:-

XXXXXXXX

Select ‘Yes’ to confirm.

Select ‘No’ to change.

Yes No

O P Q R S T
7 8 9 ! : #
o p q r s t

Enter the encryption key of the access point.
Set characters one by one

Select “Yes”

Wireless LAN connection setup is completed

If the connection is failed, check the encryption key, settings or positions of your access point.



For details, read the manual of the access point.
If connection to the access point is successful, we recommend you perform the “Connection Test”



to confirm connection to the internet has been made. The “Connection Test” can be found in the
Network Setup menu (p. 56).

select

Store

RETURN

set

You can set characters by using numeric buttons (p. 23).



select

set

To re-enter the encryption key, select “No”.



13

Watching TV

POWER

ASPECT

INFO

k

n

i

L

A

R

E

I

V

OPTION

TEXT

ghi

MUTE

When the TV is



SD CARD

MENU

R

E

I

V

G Y

STTL

INPUT

TV

T

O

A

O

L

S

INDEX

abc def

jkl

tuvpqrs

SURROUND

AV

EXIT

G

U

I

D

RETURN

BR

HOLD

mno

wxyz

E

switched to standby,
there will be a clicking
sound after a short
delay. This is normal.

Turn power on

1

POWER

Mains power On / Off switch should be



On (p. 11).

Select Digital TV or Analogue TV mode

2

TV

Also possible to select the mode pressing the TV button



repeatedly on the remote control or side panel of the TV. (p. 11).

Digital TV

1 BBC ONE WALES

Coronation Street
11:00 pm - 11:55 pm

Rating: PG

Select a channel

3

Now

up

or

down

11:35 pm

All Digital Channels

Select favourites

Software update

ghi

abc def

jkl

tuvpqrs

The selected mode is displayed.

Information banner appears whenever you
select a channel

For details

45

mno

wxyz



To select the two or three-digit channel



number, e.g. 39

If one or two-digit channel number



p. 15

wxyz

def

quickly changes the channel

To select from the Channel List 

All Digital Channels

6

Cartoon Nwk

7

BBC Radio Wales

8

BBC Radio Cymru

1

BBC ONE Wales

2

BBC THREE

3

BBCi

4

CBBC Channel

Select

EXIT

View

RETURN

Page up

Page down

select a channel

watch

(in a short time)

Select a channel using information banner (p. 15)

Possible to confirm the programme name
before selecting channels.

Display information banner
if it is not displayed

INFO

Possible to set display timeout in
“Banner Display Timeout” (p. 28).

Other useful functions

HOLD STTL

Freeze / unfreeze picture Display / hide subtitles (if available)

Off Timer

Turn the TV off automatically after a fixed period of time (Off / 15 / 30 / 45 / 60 / 75 / 90 minutes)

14

MENU

To cancel  Set to off or turn the TV off.
To display the remaining time  Information banner
When the remaining time is within 3 minutes, the remaining time will flash on screen.



Setup Menu

Off Timer

USB HDD Setup
Child Lock
Digital TV Tuning Menu
Display Settings
VIERA Link Settings

Select “Off Timer” and set the time

Select a channel using TV Guide (Digital TV mode) (p. 17)

Possible to confirm the TV Guide (EPG) before
selecting channels.

While the banner
is displayed,
select a channel

select

watch

Display TV Guide Select a channel

select

watch

Display subtitlesHold

Off

1/2

select

Other useful functions

Display information banner

INFO







Display information banner

Also appears when changing a channel



Channel position and name

Programme

Programme Start / Finish time

Example (Analogue TV mode)

1 BBC

CH 02 Prompt Street

Channel Status

To confirm another tuned channel name

To watch the programme listed in the banner

Information on the next programme
(Digital TV mode)

To select a favourite list (Digital TV mode)



To update the TV software



EXIT

To hide



R

Example (Digital TV mode)

1 BBC ONE WALES

Coronation Street
11:00 pm - 11:55 pm

Rating: PG

9:35 pm

All Analogue Channels

45

Features available /
Message meanings

Rating

Bad signal

B

Encrypted

Current time

11:3 5 pm

Now

Sound mute On
Rating information (p. 68)

(Digital TV mode)
Poor TV signal quality

(Digital TV mode)
Scrambled programme

(Digital TV mode)
Subtitle service available

(Digital TV mode)

Multiple image or audio
available (Digital TV mode)

All Digital Channels

Select favourites

Software update

45

Watching TV

Basic

, I ,

II

,

1 - 90

Extra information



(press again to hide the banner)
(Digital TV mode)

To set display timeout



INFO

“Banner Display Timeout” (p. 28)

Display the selectable settings for the current programme

OPTION

Check or change the current
programme status instantly

Audio Selection (Digital TV mode)

Allows you to select between alternative
language for sound tracks (if available)

Dual Audio (Digital TV mode)
Selects multiplex sound (if available)

USB Remove Safely

Takes this operation to remove the connected
USB device safely from the TV.

To change



change
select

MPX (Analogue TV mode)
Selects multiplex sound (if available)

Sound Menu (p. 26)

Volume Correction

Adjusts volume of individual programme or
input mode

Sound Menu (p. 26)

Teletext service available

Audio mode (p. 68)
(Analogue TV mode)

Off Timer remaining time

For settings



p. 14

15

Watching TV

Other useful functions

Change aspect ratio

Enjoy viewing the picture at its optimum size and aspect.

ASPECT

Display Aspect Selection list

Aspect Selection

16:9

14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3

Select

EXIT

Change

RETURN

To change the mode using the ASPECT button only

ASPECT

Press repeatedly until you reach the desired mode

Aspect Selection

16:9

14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3

store

select

While the list is displayed,
select the mode

16:9 14:9

Directly displays the
image at “16:9” without
distortion (anamorphic).

4:3

Displays the image
at the standard “4:3”
without distortion.

Zoom2

Only ”16:9” and “4:3 Full” are available in Digital TV mode.



Only “16:9” and “4:3” are available in PC input mode.



Aspect is fixed to “16:9” when “Viewing Mode” is set to “Game” in the Picture Menu.



Not available in teletext mode.



Aspect mode can be memorized separately for each SD (Standard definition) and HD (High



Displays a “16:9”
letterbox
(anamorphic) image
full-screen without
distortion.

4:3 Full Zoom1

Zoom3

Displays the
image at the standard
“14:9” without
distortion.

Displays a “4:3” image
enlarged horizontally
to fit the screen.

Digital TV mode



and HD signal only

Displays a “2.35:1” letterbox (anamorphic)
image full-screen without distortion.
At “16:9”, displays the image at its maximum
(with slight enlargement).

Just

Displays a “4:3” image
full-screen. Stretching
is only noticeable
at the left and right
edges.

Displays a “16:9”
letterbox or “4:3” image
without distortion.

definition) signals except in Digital TV mode.

Region Select

Adjust the standard time

Select the region where you live to adjust the
standard time.

The time contained in the broadcast signal is



UTC (Universal Time coordinated) formally
known as GMT (Greenwich Mean Time).

Daylight Saving Time

Adjust for Summer Time

Select time offset from the standard time for
Summer Time.

Normally select “Auto”.



If there is a gap between displayed time and



actual time, set this function.

Region Standard time

NSW / ACT
Victoria
Queensland +10:00
South Australia
Western Australia
Northern Territory
Tasmania +10:00 +11:00

These items can be set from “Other settings” in Setup Menu. (p. 29)

16



Daylight Saving Time: Auto

(During Summer Time)

+10:00 +11:00

+9:30 +10:30

+8:00
+9:30

(Based on GMT)

Using TV Guide (Digital TV mode)

Using TV Guide enables you to select a programme easily, view programme information, etc.
TV GuideElectronic Programme Guide (EPG) provides an on screen listing of the current and future
programmes over the next seven days depending on broadcasters.

POWER

ASPECT

INFO

L

A

R

E

I

V

OPTION

TEXT

MUTE

POWER

SD CARD

k

n

i

ghi

MENU

R

E

I

V

G Y

STTL

REC

INPUT

TV

T

O

A

O

L

S

INDEX

abc def

jkl

tuvpqrs

SURROUND

PROGRAMME

BD/DVD

AV

EXIT

G

U

RETURN

BR

HOLD

mno

wxyz

View TV Guide

Each time pressed, the layout will be changed. (Landscape / Portrait)

TV Guide time

TV Guide date

I

D

E

Example:

TV Guide: Landscape

Wed 10 Mar 2010

11 Home
11:00 am - 12:30 pm In Memory of Lydia Shum (R) (S)

Time:

11:00amampmpm11:30 12:00 12:30 1 :00 pm

Home

11

16

World

81

Jade

84

Pearl

Select channel

View

-24 hours

DIY SOS

Hot Wars

Coronation Street

Emerald

10 O’ clock News BBC Pepsi Char.

EXIT
Select programme
RETURN

+24 hours FavouritesProg-Type

Landscape (Displays by channel)

Current date and time

Programme

Wed 10 Mar 2010 11:27 am

All Digital ChannelsAll Types

Red Cap

The Bill

Good bye

Sports

Live junction

Drama

NEWS

The BillEast ender

Holiday Program

Info

Portrait / Landscape

GUIDE

Example:

TV Guide: Portrait

Wed 10 Mar 2010

11 Home

11:00 am - 12:30 pm

12:30 pm - 02:00 pm

02:00 pm - 02:30 pm

02:30 pm - 03:00 pm

03:00 pm - 03:30 pm

03:30 pm - 04:30 pm

04:30 pm - 05:00 pm

Select programme

View

-24 hours

16 World

East ender

DIY SOS

The Bill

Red Cap

Live junction

POP 100

Rugby

EXIT
Select channel
RETURN

+24 hours

All Types

Info

Portrait / Landscape

GUIDE

Prog-Type

84 Pearl81 Jade

Portrait (Displays by time)

Wed 10 Mar 2010 11:27 am

All Digital Channels

Page up

Page down

Favourites

Watching TV

Using TV Guide (Digital TV mode)

Channel position and name

Basic

To watch the programme

select

watch

TV

To view a channel list of the
selected favourite list

B

(favourite list)

Favourites

All Channels

All Channels

All Digital Channels

All Analogue Channels

Favourites1

Favourites2

Favourites3

Favourites4

select a

favourite
list

view

To list favourite channels p. 31

To return to TV

EXIT

To view details of the programme

Select the programme

select

INFO

Press again



to return to
TV Guide.

R

To the previous day

G

To the next day

When this TV is turned on for the first time, or the TV is switched off for more than a week, it may



To view a channel list of the
selected type

Y

(Type list)

Prog. type

All Types

All Types

Movie

News

Entertainment

Sport

Children’s

Music

....

take some time before the TV Guide is completely shown.

select

type

view

17

Viewing Teletext

Teletext services are the text information provided by the broadcasters.
The features may vary depending on the broadcasters.

What is FASTEXT mode?

In FASTEXT mode, four differently coloured subjects are situated at the bottom of the screen. To
access more information about one of these subjects, press the appropriately coloured button. This
facility enables fast access to information on the subjects shown.

What is TOP mode? (In case of TOP text broadcasting)

TOP is a particular improvement of the standard teletext service that results in an easier search and
effective guide.

Fast overview of the teletext information available



Easy to use step-by-step selection of the topical subject



Page status information at the bottom of the screen



Available page up / down
To select among subject blocks

To select next subject within the subject block
(After the last subject, it moves to the next subject block.)

What is List mode?

In List mode, four differently coloured page numbers are situated at the bottom of the screen. Each of
these numbers can be altered and stored in the TV’s memory. (“Store frequently viewed pages”

To change mode “Teletext” in Setup Menu (p. 28)

ASPECT

MENU

INFO

R

E

I

V

OPTION

E

I

V

k

n

i

L

A

EXIT

T

O

A

O

R

L

S

G

U

I

D

E

RETURN

R

G

B

Switch to Teletext

1

TEXT

Displays Index



(content varies
depending on
the broadcasters)

Current
page
number

Y

Sub page number

<< 01 02 03 04 05 06 07 >>

TELETEXT

INFORMATION

17:51 28 Feb

p. 19)

Time /
date

G Y

HOLD

INDEX

STTL

TEXT

abc def

jkl

ghi

tuvpqrs

MUTE

SURROUND

Functions (Teletext mode)

Hold Reveal hidden data

HOLD

Stop automatic updating

(If you wish to hold the current page
without updating)

To resume

INDEX Call up Subtitle

INDEX

Return to the main index page

18

BR

mno

wxyz

Select the page (up to page 899)

2

abc def

jkl

ghi

tuvpqrs

To adjust contrast

MENU

(press three times) As the blue bar is displayed

To return to TV

HOLD

Colour bar

up

mno

or

wxyz

TEXT

or

down

EXIT

R G Y B

or

(Corresponds to the colour bar)

or

MENU

Reveal hidden words e.g. quiz

R

page answers

R

STTL

Display subtitles

Call up P801 (subtitle page) if available.



If you press this button during P801



To hide

is displayed, teletext mode will be
cancelled and return to TV.

Functions (Teletext mode)

View in multi window

Watch TV and Teletext in two windows at once

MENU

(press twice)

Operations can be made only in Teletext screen.



Select teletext only
or picture / teletext

FULL / TOP / BOTTOM

(BOTTOM)

MENU

G

(Expand the TOP half)

(TOP)

(Expand the BOTTOM half)

Store frequently viewed pages

Store frequently viewed pages in the colour bar (List mode only)

Corresponding
colour button

press and
hold

(As page is displayed)

The number changes to white.

To change stored pages

Colour button you
want to change

abc def

jkl

ghi

tuvpqrs

Enter new

mno

page number

wxyz

View sub page

View sub page (Only when teletext is more than one page)

Normal (FULL)

Viewing Teletext

Basic

press and hold

To view specific sub page

MENU

Sub pages:



B

The number of sub pages varies depending on the broadcasters.
It may take some time for searching, during which time you can watch TV.

Watch TV while waiting for update

View the TV picture while searching for a teletext page

Teletext automatically updates itself when new information becomes available.

MENU

Y

P108

Changes to TV screen temporarily (You cannot change the programme.)

The news page provides a function that indicates arrival of latest news (“News Flash”).



Appears at top of
the screen

example: P6

Appears
when
updating is
completed

mno

Enter the
4-digit number

Y

View the
updated page

19

Watching External inputs

Connect the external equipment (VCRs, DVD equipment, PC, etc.) and you can watch through the
input.

To connect the equipment



The Remote Control is capable of operating some functions of selected external equipment.
For details, see the manual of the equipment or ask your local dealer.

p. 66, 67

POWER

ASPECT

INFO

L

A

R

E

I

V

OPTION

TEXT

MUTE

POWER

k

n

i

ghi

SD CARD

MENU

R

E

I

V

STTL

REC

INPUT

TV

T

O

A

O

L

S

INDEX

abc def

jkl

tuvpqrs

SURROUND

PROGRAMME

AV

EXIT

G

U

I

RETURN

BR G Y

HOLD

mno

wxyz

Display the input selection menu

1

AV

Select the input mode of the connected equipment

D

E

2

You can also select the input using the AV button on the remote



control or the side panel of the TV (p. 11).
Press the button repeatedly until the desired input is selected.
You can label or skip each input mode



“Input Labels” (p. 37)

Skipped inputs will not be displayed when the AV button is pressed.

Example (AV2) Example (PC)

Input Selection

AV1

AV2

AV3
AV4
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Media Server

Input Selection

AV1
AV2
AV3
AV4

PC

HDMI1
HDMI2
HDMI3
HDMI4
TV
Media Server

watch

select

BD/DVD

TV

To return to TV

TV

View

3

The selected mode is displayed on the screen.
Example (AV2)

16:9

If the external equipment has an aspect adjustment function, set to



“16:9”.

Example (PC)

PC
640X480 / 60Hz
16:9

You can also listen to PC sound with the audio cable connected.



(To connect p. 66, 67)
You can setup some functions  PC Setup (p. 27) in Setup Menu
and Advanced Picture Settings (p. 34).
For HDMI-compatible PC (p. 69 - 70), possible to connect to HDMI



terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using HDMI cable.

20

Operating the equipment with the TV remote control

The equipment connected to the TV can be directly operated with the below buttons of this TV
remote control.

BD/DVD / TV switch∗

Switch to BD/DVD to operate Panasonic DVD Recorder, DVD Player,
Player theatre, Blu-ray Disc theatre or VCR

BD/DVD

TV

Switch to TV to operate USB HDD Recording, Media Player or
VIERA Link equipment

“USB HDD Recording” (p. 40)
“Media Player” (p. 44)
“VIERA Link Control” (p. 64)

POWER

PROGRAMME

Standby

Set to Standby mode / Turn on

Play

Playback videocassette / DVD

Stop

Stop the operation

Rewind / Skip / Search

VCR: Rewind, view the picture rapidly in reverse
DVD / video content: Skip to the previous track or title

(not available for the operation of USB HDD Recording)
Press and hold to search backward

Fast-forward / Skip / Search

VCR: Fast-forward, view the picture rapidly forward
DVD / video content: Skip to the next track or title

(not available for the operation of USB HDD Recording)
Press and hold to search forward

Pause

Pause / Resume
DVD: Press and hold to play at slow speed

Programme Up / Down

Select programme

Watching External inputs

Basic

REC

Record

Start recording

Setting your remote control to operate Panasonic VCR, DVD, etc.

∗

Switch to BD/DVD
Press and hold

Enter the appropriate
code
See table below

POWER

BD/DVD

during the following operations

abc def

jkl

ghi

mno

tuvpqrs

wxyz

Type of equipment Code

DVD Recorder / DVD Player 70 (default)

Player theatre / Blu-ray Disc theatre 71

VCR 72

Confirm if the remote control works correctly after changing the code.



The codes may be reset to default values if batteries are replaced.



Some operations may not be possible on some equipment models.



TV

Press

21

How to Use VIERA TOOLS

You can access some special features easily by using the VIERA TOOLS function.

POWER

ASPECT

INFO

L

A

R

E

I

V

OPTION

TEXT

MUTE

POWER

k

n

i

ghi

SD CARD

MENU

R

E

I

V

GR

STTL

REC

INPUT

TV

T

O

A

O

L

S

Y

INDEX

abc def

jkl

tuvpqrs

SURROUND

PROGRAMME

AV

EXIT

G

U

I

RETURN

B

HOLD

mno

wxyz

Display icons of the feature

1

Select a feature

2

D

E

select

access

VIERA Link Control

Follow the operation of each feature

3

VIERA Link Control



“VIERA Link Control” (p. 64)

When two or more compatible equipment are connected, a selection
screen will be displayed.
Please select the correct description and access.

Pause Live TV



Photo



“Pause Live TV” (p. 63)

“Photo mode” (p. 46)

BD/DVD

TV

To return to TV

EXIT

or

When two or more available devices are connected, a selection screen
will be displayed.
Please select the correct description and access.

Video



“Video mode” (p. 48)

When two or more available devices are connected, a selection screen
will be displayed.
Please select the correct description and access.

Music



“Music mode” (p. 51)

When two or more available devices are connected, a selection screen
will be displayed.
Please select the correct description and access.

VIERA CAST



Media Server



“VIERA CAST™” (p. 60)

“Using DLNA® features” (p. 57)

If the selected feature is not available, the demonstration to explain how to



use it can be displayed. Press the OK button to view the demonstration after

22

selecting the unavailable feature.

How to Use Menu Functions

Various menus allow you to make settings for the picture, sound, and other functions.

POWER

ASPECT

INFO

L

A

R

E

I

V

OPTION

TEXT

MUTE

POWER

SD CARD

k

n

i

ghi

MENU

R

E

I

V

G Y

STTL

REC

INPUT

TV

T

O

A

O

L

S

INDEX

abc def

jkl

tuvpqrs

SURROUND

PROGRAMME

BD/DVD

AV

EXIT

G

U

RETURN

BR

HOLD

mno

wxyz

Display the menu

1

MENU

Displays the functions that can be set



(varies according to the input signal)

Select the menu

I

D

E

3

4

TV

2

Main Menu

Picture

Sound

Setup

(example)

Select the item

Picture Menu

Viewing Mode

Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance
Vivid Colour
Reversal Film Effect

Normal

Normal

On
Off

Adjust or select

Picture Menu

Viewing Mode
Contrast
Brightness
Colour
Sharpness
Tint
Colour Balance

Vivid Colour
Reversal Film Effect

Normal

Normal

On
Off

1/2

90

0
50
50

0

1/2

90

0
50
50

0

(example)

(example)

access

select

select

change

store or access

( Required by some

functions)

How to Use VIERA TOOLS

How to Use Menu Functions

To return to TV at
any time

EXIT

To return to the
previous screen

RETURN

To change menu
pages

up

down

Choose from among alternatives

Number and positions of alternatives

Colour Balance Normal

Changed

Adjust using the slide bar

Sharpness

Moved

50

To reset the settings

To reset the picture settings only



“Reset Picture Defaults”

in Picture Menu (p. 26)

To reset the sound settings only



“Reset Sound Defaults”

in Sound Menu (p. 27)

Go to the next screen

Digital TV Tuning Menu Access

Displays the next screen

Enter characters by free input menu

User input

Name

A B C D E F G H I J K L M N
U V W X Y Z 0 1 2 3 4 5 6
a b c d e f g h i j k l m n
u v w x y z ( ) + - . * _

O P Q R S T

7 8 9 ! : #
o p q r s t

R

To delete a character 

To reset all settings



“Shipping Condition” (p. 38)

in Setup Menu

select

or

set

abc def

jkl

ghi

mno

tuvpqrs

wxyz

To delete all characters 

RETURN

Store

B

Every press changes the character by one. Leave it for a second to set the
character, or press OK or any numeric button within a second.
See the table below for the corresponding characters for each numeric button.

Numeric buttons Characters Numeric buttons Characters

_

1 . 1 ! : # + - *
2 a b c 2 A B C 7 p q r s 7 P Q R S
3 d e f 3 D E F 8 t u v 8 T U V
4 g h i 4 G H I 9 w x y z 9 W X Y Z
5 j k l 5 J K L 0 Space 0

( )

6 m n o 6 M N O

Advanced

23