Panasonic Viera TH-L32XM6H, Viera TH-L39EM6H, Viera TH-L50EM6H, TH-L32B6H, TH-L39B6H Operating Instructions Manual
Model No.
TH-L32XM6H
TH-L39EM6H
TH-L50EM6H
Operating Instructions
LED TV
English
Thank you for purchasing this Panasonic product.
Please read these instructions carefully before operating
this product and retain them for future reference.
The images shown in this manual are for illustrative
purposes only.
Some illustrations are presented as conceptual images
and may be different from the actual products.
Illustrations shown may be different between models
and countries.
Transport only in upright position
CGP
TQB4GC1049-1
TH-32_39_52XM_EM6H_EN.indd 1TH-32_39_52XM_EM6H_EN.indd 1 2/1/2013 2:19:20 PM2/1/2013 2:19:20 PM
2
Manufactured under license
from Dolby Laboratories.
Dolby and the double-D
symbol are trademarks of
Dolby Laboratories.
Manufactured under license under U.S. Patent
Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S.
and worldwide patents issued & pending. DTS,
the Symbol, & DTS and the Symbol together are
registered trademarks & DTS 2.0+Digital Out is a
trademark of DTS, Inc. Product includes software.
© DTS, Inc. All Rights Reserved.
HDMI, the HDMI Logo, and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United
States and other countries.
HDAVI Control™ is a trademark of Panasonic
Corporation.
RealMedia, RealVideo and
RealAudio are trademarks
or registered trademarks of
RealNetworks, Inc.
These statements are under the Licence Agreement
with RealNetworks, Inc.
4.4.2.1 Terms of use must prohibit the user from
modifying, translating, reverse engineering,
decompiling, disassembling or using other means
to discover the Source Code or otherwise replicate
the functionality of the Client Code, except to the
extent that this restriction is expressly prohibited by
applicable law.
4.4.2.2 Terms of use must effectively disclaim on
behalf of Real all warranties and conditions other than
those set forth in this Agreement, express and
implied, including implied warranties or conditions of
merchantability and fitness for a particular purpose;
and effectively exclude all liability for indirect, special,
incidental and consequential damages, including but
not limited to lost profits or replacement systems.
This product is licensed under the AVC patent
portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance
with the AVC Standard (“AVC Video”) and/or (ii)
decode AVC Video that was encoded by a consumer
engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed to
provide AVC Video. No license is granted or shall be
implied for any other use.
Additional information may be obtained from MPEG
LA, LLC.
See http://www.mpegla.com.
S
a
To he
injury
,
■ M
a
W
a
If yo
u
imm
e
plug
.
M
a
be
t
Thi
s
50/
6
Ins
e
Ens
Dis
c
Do
n
Do
n
•D
o
o
n
•D
o
hi
•D
o
o
n
w
h
•D
o
s
o
•D
o
•D
o
•E
n
Do
n
with
■ Ta
k
W
a
Do
n
nev
e
live
the
y
use
r
Do
n
or e
x
mu
s
or s
p
fille
d
mu
s
abo
v
Do
n
air
v
Do
n
equ
i
to p
e
han
g
Do
n
pan
e
Do
n
or u
ens
u
han
g
This product incorporates the following software:
(1) the software developed independently by or for
Panasonic Corporation,
(2) the software owned by third party and licensed to
Panasonic Corporation,
(3) open sourced software
The software categorized as (3) is distributed in
the hope that it will be useful, but WITHOUT ANY
WARRANTY, without even the implied warranty
of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. Please refer to the
detailed terms and conditions thereof shown in the
“Software License” menu on this product.
Panasonic does not guarantee operation and
performance of peripheral devices made by other
manufacturers; and we disclaim any liability or
damage arising from operation and/or performance
from usage of such other maker’s peripheral devices.
Even if no special notation has been made of company
or product trademarks, these trademarks have been
fully respected.
Notice for Digital terrestrial broadcasting
functions
Function related to Digital broadcasting will work in
the areas where the digital terrestrial broadcasting
services are received. Consult your local Panasonic
Dealer with coverage areas.
Not all the features are available depending on the
country, area, broadcaster and service provider.
This TV has the capability for Digital broadcasting
specifications. But future Digital broadcasting
services cannot be guaranteed.
Contents
Safety Precautions······································3
Setting Up the TV········································4
Connecting the TV ······································6
Initial Setup················································7
Operating the TV ········································8
Watching External Inputs ·····························9
Using TV Guide ··········································9
Using VIERA TOOLS ································· 10
Using Media Player ··································· 10
Using the Menu Functions ························· 12
Link Functions (VIERA Link) ······················17
Additional Information······························· 19
Troubleshooting ······································· 21
Maintenance ············································ 21
Specifications ·········································· 22
TH-32_39_52XM_EM6H_EN.indd 2TH-32_39_52XM_EM6H_EN.indd 2 2/1/2013 2:19:20 PM2/1/2013 2:19:20 PM
Safety Precautions
3
Safety Precautions
To help avoid risk of electrical shock, fire, damage or
injury, please follow the warnings and cautions below:
■ Mains plug and lead
Warning
If you detect anything unusual,
immediately remove the mains
plug.
Mains plug types vary
between countries.
This TV is designed to operate on AC 220 - 240 V,
50/60 Hz
Insert the mains plug fully into the socket outlet.
Ensure that the mains plug is easily accessible.
Disconnect the mains plug when cleaning the TV.
Do not touch the mains plug with wet hands.
Do not damage the mains lead.
• Do not place a heavy object
on the lead.
• Do not place the lead near a
high temperature object.
• Do not pull on the lead. Hold
onto the mains plug body
when disconnecting the plug.
• Do not move the TV with the lead plugged into a
socket outlet.
• Do not twist the lead, bend it excessively or stretch it.
• Do not use a damaged mains plug or socket outlet.
• Ensure the TV does not crush the mains lead.
Do not use any mains lead other than that provided
with this TV.
■ Take care
Warning
Do not remove covers and
never modify the TV yourself as
live parts are accessible when
they are removed. There are no
user serviceable parts inside.
Do not expose the TV to rain
or excessive moisture. This TV
must not be exposed to dripping
or splashing water and objects
filled with liquid, such as vases,
must not be placed on top of or
above the TV.
Do not insert foreign objects into the TV through the
air vents.
Do not use an unapproved pedestal / mounting
equipment. Be sure to ask your local Panasonic dealer
to perform the setup or installation of approved wallhanging brackets.
Do not apply strong force or impact to the display
panel.
Do not place the TV on sloped
or unstable surfaces, and
ensure that the TV does not
hang over the edge of the base.
This TV is designed for table-top use.
Do not expose the TV to direct
sunlight and other sources of
heat.
To prevent the
spread of fire, keep
candles or other
open flames away
from this product at
all times
■ Dangerous part / Small object
Warning
This product contains possibly dangerous parts such
as plastic bags, that can be breathed in or swallowed
by young children accidentally. Keep these parts out of
reach of young children.
■ Pedestal
Warning
Do not disassemble or modify the pedestal.
Caution
Do not use any pedestal other than the one provided
with this TV.
Do not use the pedestal if it becomes warped or
physically damaged. If this occurs, contact your
nearest Panasonic dealer immediately.
During setup, make sure that all screws are securely
tightened.
Ensure that the TV does not suffer any impact during
installation of the pedestal.
Ensure that children do not climb onto the pedestal.
Install or remove the TV from the pedestal with at least
two people.
Install or remove the TV by the specified procedure.
■ Ventilation
Caution
Allow sufficient space around the TV in order to help
prevent excessive heat, which could lead to early failure
of some electronic components.
Minimum distance (cm)
10
10
10
10
Ventilation should not be
impeded by covering the
ventilation openings with
items such as newspapers,
tablecloths and curtains.
Whether you are using a pedestal or not, always
ensure the vents at the bottom of the TV are not
blocked and there is sufficient space to enable
adequate ventilation.
r
to
e
es.
pany
n
in
g
nic
e
g
3
4
6
7
8
9
9
0
0
2
7
9
1
1
2
TH-32_39_52XM_EM6H_EN.indd 3TH-32_39_52XM_EM6H_EN.indd 3 2/1/2013 2:19:20 PM2/1/2013 2:19:20 PM
Safety Precautions | Setting Up the TV
4
■ Moving the TV
Caution
Before moving the TV, disconnect all cables.
Move the TV with at least two
people. Support as shown to
avoid injury by the TV tipping
or falling.
■ When not in use for a long time
Caution
This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected to a
live socket outlet.
Remove the mains plug from the wall socket when the
TV is not in use for a prolonged period of time.
■ Use conditions
Caution
This appliance is intended for use in tropical climates.
■ Battery for the Remote Control
Caution
Incorrect installation may cause battery leakage,
corrosion and explosion.
Replace only with the same or equivalent type.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and
manganese batteries).
Do not use rechargeable batteries (Ni-Cd, etc.).
Do not burn or break up batteries.
Do not expose batteries to excessive heat such as
sunshine, fire or the like.
Make sure you dispose of batteries correctly.
Setting Up the TV
Standard accessories
Accessories may not be placed all together. Take care
not to throw them away unintentionally.
Operating Instructions
Remote Control
N2QAYB000817
Batteries (R6) × 2
(p. 5)
Mains Lead
(p. 6)
Pedestal
Assembly screws
(M5 × 16) × 4
32” & 39” class: (M4 × 12) × 4
50” class: (M4 × 15) × 4
Bracket
Base
Attaching the pedestal
1 Assemble the pedestal
Front
2 A
t
C
a
Sec
u
Th
e
en
o
Re
m
Be s
u
when
TV.
1 Re
m
2 Pu
l
3 Re
m
In
s
Note
pola
r
TH-32_39_52XM_EM6H_EN.indd 4TH-32_39_52XM_EM6H_EN.indd 4 2/1/2013 2:19:21 PM2/1/2013 2:19:21 PM
Setting Up the TV
5
re
2 Attach the TV to the pedestal
Carry out the work on a horizontal and level surface.
Secure the base to prevent the TV from falling over.
The place where the base is secured should be thick
enough and made of hard material.
Commercially available screw
(not supplied)
Diameter: 3 mm
Length: 25 - 30 mm
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1 Remove the assembly screws from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screws from the bracket.
Inserting remote’s batteries
Note the correct
polarity (+ or -)
Press the hook and
lift the cover
Wall mounting the TV (optional)
Please contact your local Panasonic dealer to purchase
the recommended wall-hanging bracket.
a
b
Rear of the TV
Screw for fixing the TV onto the
wall-hanging bracket (not supplied)
Depth of
screw
(View from the side)
■ Holes for wall-hanging bracket installation
Models a b
TH-L32XM6H 200 mm 100 mm
TH-L39EM6H 200 mm 200 mm
TH-L50EM6H 400 mm 400 mm
■ Screw specification
Models Type
Depth of screw
Minimum Maximum
TH-L32XM6H M6 23 mm 24 mm
TH-L39EM6H M6 19 mm 20 mm
TH-L50EM6H M6 21 mm 23 mm
Warning
When optional accessories such as wall brackets etc.
are used, always read and follow the manufacturer
installation and usage instructions.
Do not mount the unit directly below ceiling lights (such
as spotlights or halogen lights) which typically give
off high heat. Doing so may warp or damage plastic
cabinet parts.
When installing wall brackets you must ensure the wall
bracket is not electrically grounded to metal wall studs.
Always ensure that there are no electrical cables,
pipes etc. in the wall before you begin the wall bracket
installation.
To prevent fall and injury, remove the TV from its fixed
wall position when it is no longer in use.
TH-32_39_52XM_EM6H_EN.indd 5TH-32_39_52XM_EM6H_EN.indd 5 2/1/2013 2:19:21 PM2/1/2013 2:19:21 PM
Connecting the TV
6
Connecting the TV
Please ensure the TV is disconnected from the mains
socket / power point before attaching or disconnecting
any RF / AV leads.
External equipment and cables are for illustratives
purposes only and not supplied with this TV.
Check the type of terminals and cable plugs are
correct when connecting.
When using an HDMI cable, use the fully wired one.
Keep the TV away from electronic equipment (video
equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or
operation of other equipment may be interfered.
Also read the manual of the equipment being
connected.
Terminals
ANALOG AUDIO
via AV1
AV1
IN
AUDIO
OUT
DIGITAL
AUDIO
OUT
ANT
AUDIO
VIDEO
COMPONENT
R
RLL
PR/CRPB/CBY/VIDEO
USB
AV2
IN
VIDEO
L
AUDIO
R
(ARC)
2
1
3
5
6
7
4
VIDEO
AUDI
O
V
N
AUDI
O
VIDEOMPO
NENT
/C/CY/
VIDE
O
ARC
)
AUDI
O
U
T
1 Aerial terminal
2 DIGITAL AUDIO OUT
3 AUDIO OUT
4 AV1 IN
5 AV2 IN
6 USB port
7 HDMI 1 - 2
Connections
Aerial and mains lead
ANT
RF cable
Mains lead
(supplied)
Aerial
Keep RF (aerial) cable away from the mains lead to
avoid and minimise mains interference pickup.
Do not place the RF cable under the TV.
An aerial, correct cable (75 coaxial) and correct
terminating plug are required to obtain optimum quality
picture and sound.
If a communal aerial system is used, you may require
the correct connection cable and plug between the wall
aerial socket and the TV.
Your local Television Service Centre or dealer may be
able to assist you in obtaining the correct aerial system
for your particular area and the accessories required.
Any matters regarding aerial installation, upgrading
of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the
customer.
If the aerial is placed in the wrong location, interference
might happen.
DVD Recorder / VCR
DVD Recorder /
VCR
ANT
TV
HDMI cable
RF cable
RF cable
Set top box
TV
Set top box
HDMI cable
Satellite dish
AV / Game equipment
■ Using HDMI terminal
TV
HDMI cable
Equipment
You can also make similar connection via HDMI 2.
■ U
s
AV1
IN
R
TV
■ U
s
AV1
IN
R
TV
You
Sp
e
(ARC)
TV
Use
(Au
d
As
f
AU
D
To
e
mul
t
the
e
rea
d
In
Whe
n
up to
The
co
m
1 P
l
o
u
2 T
u
w
c
o
TH-32_39_52XM_EM6H_EN.indd 6TH-32_39_52XM_EM6H_EN.indd 6 2/1/2013 2:19:22 PM2/1/2013 2:19:22 PM
Connecting the TV | Initial Setup
7
o
ality
wall
be
stem
ed.
g
e
ence
er /
le
■ Using COMPONENT terminals
AV1
IN
AUDIO
VIDEO
COMPONENT
RL
PR/CRPB/CBY/VIDEO
Equipment
Audio cable
Component
video cable
TV
■ Using COMPOSITE terminals
AV1
IN
AUDIO
VIDEO
RL
Y/VIDEO
Equipment
Audio cable
Video cable
TV
You can also make similar connections via AV2 IN.
Speaker system
(ARC)
HDMI cable
Amplifier with
speaker system
TV
Use HDMI 2 for connecting an amplifier that has ARC
(Audio Return Channel) function.
As for an amplifier without ARC function, use DIGITAL
AUDIO OUT or AUDIO OUT.
To enjoy the sound from the external equipment in
multi-channel sound (e.g. Dolby Digital 5.1ch), connect
the equipment to the amplifier. For the connections,
read the manuals of the equipment and amplifier.
Initial Setup
When you first turn on the TV, a series of steps will popup to guide you to setup your TV.
These steps are not necessary if the setup has been
completed by your local dealer.
1 Plug the mains plug into the socket
outlet
AC 220 - 240 V,
50/60 Hz
2 Turn on the TV
with the remote
control
3 Select your language
OSD Language
English
OK
Store
Select
4 Select [Home]
Please select your viewing environment.
Home Shop
OK
Confirm
Select
[Shop] is for shop display.
To change the viewing environment later on, you
need to initialise all settings by accessing [Shipping
Condition] (p. 15).
5 Tick the mode to tune, then start Auto
Tuning
TV Signal Selection
Digital TV
Analogue TV
Start Auto Tuning
: tune (search for the available channels)
: skip tuning
OK
Tick
Select
OK
Confirm
Select [Start
Auto Tuning]
■ When you select the analogue TV signal, select
your area
Analogue TV Channel Plan
Asia/W.Europe
NZ/Indonesia
China
CIS/E.Europe
CATV/Other
Hong Kong
OK
Start Auto
Tuning
Select
When selecting [CATV/Other], press the OK button,
and then select the Channel Plan from Indian
CATV, South Africa, American System, American
CATV or Japan CATV.
Auto Tuning starts
Auto Tuning searches and stores TV channels.
The stored channels and sorted channel order vary
depending on the area, broadcasting system and
conditions of signal reception.
Setup is now complete and your TV is ready for
viewing.
TH-32_39_52XM_EM6H_EN.indd 7TH-32_39_52XM_EM6H_EN.indd 7 2/1/2013 2:19:22 PM2/1/2013 2:19:22 PM
Operating the TV
8
Ab
o
Whe
n
the o
p
to pe
r
Exa
m
Aspe
c
16:9
14:9
Just
Chan
g
Refe
r
To
s
O
K
To
c
O
K
To r
e
RETU
W
a
In
1 C
o
2 D
t
h
e
q
N
o
To
s
[AV
1
cur
s
You
[
I
Ski
p
butt
o
Operating the TV
Using the remote control
MENU
VIERA
TOOLS
TEXT STTL GUIDE
CH
EXIT
POWER
INFO
RETURN
OPTION
INPUT
RGY B
ASPECT
MUTE
STILL
LAST VIEW
VOL
OK
113
14
15
16
17
18
19
20
21
3
2
4
5
6
7
8
9
10
11
12
1
Switches the TV On / Standby
2
VIERA TOOLS (p. 10)
3
Displays [Main Menu] (p. 12)
4
This button is not used for this model.
5
Displays Information banner
6
OK
Confirms selections.
Press after selecting channel positions to quickly
change channel.
Displays the Channel List.
7
Displays [Option Menu]
Shortcuts to settings for some picture / sound
items.
Follow the operation guide to select / change the
settings.
8
Coloured buttons
Performs multiple operations which correspond
to the operation guide displayed on the menu
screen.
9
Volume Up / Down
10
Sound Mute On / Off
11
Numeric buttons
Changes channel.
Sets characters.
When in Standby mode, switches TV On.
12
Freezes / unfreezes picture
13
Input mode selection
TV - switches to Digital TV / Analogue TV.
AV - displays [Input Selection] screen (p. 9) or
press repeatedly to select the AV input mode.
14
TV Guide (p. 9)
15
Displays subtitles
16
Exits to the TV viewing screen
17
Cursor buttons
Makes selections or adjustments.
18
Returns to the previous menu / page
19
ASPECT
Displays the [Aspect Selection] screen. Follow the
operation guide to select the mode. [16:9] /
[14:9] / [Just] / [4:3] / [Zoom] / [4:3 Full] /
[Sidecut Just] / [Sidecut Zoom] (p. 19)
You can also press the button repeatedly to select
the mode.
20
Channel Up / Down
21
Returns to the last viewed channel
Using the TV controls
CH
INPUT
/
HOLD
for
MENU
VOL
OK
/
1
2
3
4
Indicators on the TV
56 7
1
Displays [Input Selection] screen
When [Input Selection] screen is displayed, select
the mode using buttons 2.
OK
Confirms selection while in the menu system.
Displays [Main Menu] when press and hold for
3 seconds
2
Channel Up / Down
Cursor Up / Down
Makes selections or adjustments when in the
menu system.
3
Volume Up / Down
Cursor Left / Right
Makes selections or adjustments when in the
menu system.
When pressing 1, 2, 3 buttons, the control panel
guide appears on the right side of the screen for
3 seconds to highlight the pressed button.
4
Mains power On / Off switch
Use to switch the mains power.
5 Remote control signal receiver
6
Ambient sensor
Senses brightness to adjust picture quality when
[Ambient Sensor] in the Picture Menu is set to
[On]. (p. 12)
7
Power LED
Red: Standby
Green: On
The LED blinks when the TV receives a
command from the remote control.
TH-32_39_52XM_EM6H_EN.indd 8TH-32_39_52XM_EM6H_EN.indd 8 2/1/2013 2:19:23 PM2/1/2013 2:19:23 PM
Loading...