Panasonic VIERA TH-L32DT30A, VIERA TH-L37DT30A Operating Instructions Manual
M0211-0
Printed in Malaysia
Web Site : http://panasonic.net
© Panasonic Corporation 2011
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should
note the model number and the serial number in the space provided below and retain this book, plus
your purchase receipt, as a permanent record of your purchase to aid in identification in the event of
theft or loss, and for Warranty Service purposes.
Model Number Serial Number
Operating Instructions
LCD TV
English
Thank you for purchasing this Panasonic product.
Please read these instructions before operating your set and retain
them for future reference.
The images shown in this manual are for illustrative purposes only.
Model No.
TH-L32DT30A
TH-L37DT30A
TQB4GC0609
2
Enjoy rich multimedia
Enjoy viewing 3D images and experience
an amazing level of multimedia excitement
Receive digital terrestrial services using an integrated Digital TV tuner
Sharp pictures with HDMI terminal
Create home theatre and DVD recorder link-ups with “VIERA Link”
without complicated settings!
Camcorder
Amplifier with
Speaker system
VCR
DVD Player
Blu-ray Disc Player
USB HDD
DVD Recorder
Set top box
SD Card
Personal computer
3
Contents
Be Sure to Read
Safety Precautions ·····································4
(Warning / Important Installation Notices)
Notes ··························································5
Quick Start Guide
Accessories / Options ·································6
Basic Connection········································9
Identifying Controls ···································10
Auto Tuning ··············································12
Basic Features
Using “VIERA Connect” ····························16
Watching TV ·············································17
Using TV Guide (Digital TV mode) ···········21
Watching External Inputs ··························22
Viewing 3D images ···································24
How to Use VIERA TOOLS ······················30
How to Use the Menu Functions ··············31
Advanced Features
Tuning and Editing Channels ···················40
Timer Programming ··································44
Child Lock ·················································47
Input Labels ··············································48
Shipping Condition (Reset settings) ·········49
Updating the TV Software ························50
USB HDD / SD Card Recording ···············51
Using Media Player ··································56
Using Network Services ···························68
VIERA Link Functions ·······························78
External Equipment ··································83
Technical
Technical Information································86
Maintenance ·············································93
FAQs·························································94
Specifications ···········································97
Warranty ···················································99
Licence
Manufactured under license from Dolby Laboratories.
Dolby and the double-D symbol are trademarks of
Dolby Laboratories.
DivX
®
, DivX Certified®, DivX Plus HD™ and
associated logos are trademarks of DivX, Inc. and
are used under license.
DLNA
®
, the DLNA Logo and DLNA CERTIFIED™ are
trademarks, service marks, or certification marks of
the Digital Living Network Alliance.
HDMI, the HDMI Logo and High-Definition
Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United
States and other countries.
SDXC Logo is a trademark of SD-3C, LLC.
Manufactured under license under U.S. Patent
#’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762;
6,487,535 & other U.S. and worldwide patents
issued & pending. DTS and the Symbol are
registered trademarks, & DTS 2.0+ Digital Out and
the DTS logos are trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
QuickTime and the QuickTime logo are trademarks
or registered trademarks of Apple Inc., used under
license therefrom.
“AVCHD” and the “AVCHD” logo are trademarks of
Panasonic Corporation and Sony Corporation.
VIERA Connect is a trademark of Panasonic
Corporation.
“RealD 3D” is a trademark of RealD.
This product is covered by U.S. Patent No. 5,193,000
until 28 August, 2011.
VGA is a trademark of International Business
Machines Corporation.
S-VGA is a registered trademark of the Video
Electronics Standard Association.
HDAVI Control™ is a trademark of Panasonic
Corporation.
Macintosh is a trademark of Apple Inc.
Windows is a registered trademark of Microsoft
Corporation in the United States and/or other
countries.
This product is licensed under the AVC patent
portfolio license for the personal and non-commercial
use of a consumer to (i) encode video in compliance
with the AVC Standard (“AVC Video”) and/or (ii)
decode AVC Video that was encoded by a consumer
engaged in a personal and non-commercial activity
and/or was obtained from a video provider licensed
to provide AVC Video. No license is granted or shall
be implied for any other use. Additional information
may be obtained from MPEG LA, LLC. See http://
www.mpegla.com.
Even if no special notation has been made of
company or product trademarks, these trademarks
have been fully respected.
Safety Precautions
4
Safety Precautions
Warning
Handling the mains plug and lead
•
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat
and cause fire.)
•
Ensure that the mains plug is easily accessible.
•
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
•
Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
• Do not move the TV with the lead plugged in the socket outlet.
• Do not place a heavy object on the lead or place the lead near a high-temperature object.
• Do not twist the lead, bend it excessively, or stretch it.
• Do not pull on the lead. Hold onto the mains plug body when disconnecting the lead.
• Do not use a damaged mains plug or socket outlet.
If you find any
abnormality, remove
the mains plug
immediately!
AC 220 - 240 V,
50 / 60 Hz
Power source / Installation
•
This TV is designed for:
• AC 220 - 240 V, 50 / 60 Hz
• Table top use
• Indoor use
Do not insert foreign objects into the TV
•
Do not allow any objects to drop into the TV
through the air vents. (Fire or electrical shock
may result.)
Do not remove covers and
NEVER modify the TV yourself
•
Do not remove the rear cover as live parts are
accessible when it is removed. There are no
user serviceable parts inside. (High-voltage
components may cause serious electrical
shock.)
•
Have the TV checked, adjusted, or repaired at
your local Panasonic dealer.
Do not place the TV on sloped or
unstable surfaces
•
The TV may fall off or tip over.
Do not expose to rain or excessive
moisture
•
To prevent damage which might result in
electric shock or fire, do not expose this TV to
rain or excessive moisture. This TV must not
be exposed to dripping or splashing water and
objects filled with liquid, such as vases, must
not be placed on top of or above the TV.
Use only the dedicated pedestals /
mounting equipment
•
Using an unapproved pedestal or other fixtures
may make the TV unstable, risking injury. Be
sure to ask your local Panasonic dealer to
perform setup.
•
Use approved pedestals (p. 6) / wall-hanging
brackets (p. 8).
Do not expose to direct sunlight and
other sources of heat
•
Avoid exposing the TV to direct sunlight and
other sources of heat.
Do not allow children to handle SD Card
•
As with any small object, SD Cards can be
swallowed by young children. Please remove
SD Card immediately after use and store out of
reach of children.
To prevent the spread
of fire, keep candles
or other open flames
away from this product
at all times
Safety Precautions | Notes
5
Important Installation Notices
Install the TV on a stable surface
If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to
falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:
•
Using cabinets or stands recommended by the manufacturer of the television.
•
Only using furniture that can safely support the television.
•
Ensuring the television is not overhanging the edge of the supporting furniture.
•
Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring
both the furniture and the television to a suitable support.
•
Not standing the television on cloth or other materials placed between the television and supporting furniture.
•
Educating children about the dangers of climbing on furniture to reach the television or its controls.
When cleaning the TV, remove the mains plug
•
Cleaning an energised TV may cause electrical shock.
When the TV is not going to be used for a long period of time, remove the mains plug
•
This TV will still consume some power even in the Off mode, as long as the mains plug is still
connected to a live socket outlet.
Transport only in upright position
Allow sufficient space around the TV for radiated heat
Minimum distance
10
10
10
10
(cm)
•
When using the pedestal, keep the space between the bottom of the TV
and the surface where the TV is set.
•
If using a Wall-hanging bracket, refer to its manual.
Do not block the rear air vents
•
Blocked ventilation by newspapers, table cloths, curtains, etc. may cause overheating, fire or electrical
shock.
Do not apply strong force or impact to the display panel
•
This may cause damage resulting in injury.
Do not expose your ears to excessive volume from the headphones
•
Irreversible damage can be caused.
Notes
Auto power standby function
•
The TV will automatically go into Standby mode in the following conditions:
• no signal is received and no operation is performed for 30 minutes in Analogue TV mode
• [Off Timer] is active in the Timer Menu (p. 19)
• no operation is performed for the period selected in [Auto Standby] (p. 36)
Keep the TV away from these types of equipment
•
Electronic equipment
In particular, do not place video equipment near the TV. Electromagnetic interference may distort
images / sound.
•
Equipment with an infrared sensor
This TV also emits infrared rays. This may affect operation of other equipment.
Accessories / Options
6
Accessories / Options
Standard accessories
Remote Control
•
N2QAYB000583
Batteries for the
Remote Control (2)
•
R6 (AA)
Pedestal
(p. 7)
Wireless LAN Adaptor
(p. 14)
•
N5HBZ0000056• K2KYYYY00132
Fall-prevention parts
(p. 8)
Operating Instructions with
Warranty statement
•
This product contains possibly dangerous parts (such as plastic bags), which can be breathed in or
swallowed by young children accidentally. Keep these parts out of reach of young children.
Inserting and removing remote’s batteries
1
Pull Open
Hook
2
Note the
correct polarity
(+ or -)
Close
Caution
•
Incorrect installation may cause battery leakage
and corrosion, resulting in damage to the remote
control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such as alkaline
and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat
such as sunshine, fire or the like.
•
Do not disassemble or modify the remote control.
Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than that provided with this TV.
•
Otherwise the TV or the display may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
•
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will
not be strong enough to support the TV, and it might fall over and become damaged, and personal
injury may result.
Ensure that the TV does not fall over.
•
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and
personal injury may result.
Two or more people are required to install and remove the TV.
•
If two or more people are not present, the TV may be dropped, and personal injury may result.
Accessories / Options
7
Assembly screw (4)
(black)
Assembly screw (4)
(black)
Bracket Base
•
TBL5ZA3119
•
TBL5ZX0104
(TH-L32DT30A)
•
TBL5ZX0106
(TH-L37DT30A)
•
M5 × 15 (mm)
•
M4 × 30 (mm)
Cover (1)
•
TBL5ZB3087
Assembling the pedestal
Use the assembly screws to fasten the bracket to the base securely.
•
Make sure that the screws are securely tightened.
•
Forcing the assembly screws the wrong way will strip the threads.
•
Attach the cover
• Place the cover so that it covers up the screws for the bracket.
• Insert the protrusion of the cover into the opening of the bracket.
* The cover has a nick on the back. Attach the cover so that the nick fits underneath the bracket.
A
Bracket
Front
Base
Front
Cover
Hold the bracket
not to fall over
Nick on the back
of the cover
Securing the TV
Insert the bracket into the TV, and then fasten securely with the assembly screws
.
•
Tighten the four assembly screws loosely at first, then tighten them firmly to fix securely.
B
B
Foam mat or
thick soft cloth
Back of
the TV
Bracket
Cover
Adjust the LCD panel to your desired angle
15°
15°
(View from above)
•
Ensure that the pedestal does not hang over the edge of the base even if the TV swivels to the full
rotation range.
•
Do not place any objects or hands within the full rotation range.
Accessories / Options
8
Preventing the TV from falling over
This TV could fall over if it is pushed, pulled or knocked down.
We therefore recommend the TV is secured to the furniture as illustrated.
•
This measure is designed to reduce the risk of injury from a falling TV. However, it cannot guarantee
protection in all cases.
Band
Screw
Wood screw
Fall-prevention parts
•
This image is for illustrative purposes only.
Securing to a furniture
Fix pedestal and furniture together with band.
Screw
Band
Wood screw
Optional accessories
Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For
additional details, please refer to the manual of the optional accessories.
3D Eyewear
(Rechargeable
type)
•
TY-EW3D2S
•
TY-EW3D2M
•
TY-EW3D2L
•
Product information (Model No. and release date etc.) is subject to change
without notice.
•
For more product information (English only)
http://panasonic.net/avc/viera/3d/asia.html
Communication
Camera
Caution
•
This camera can be used on VIERA Connect (p. 16).
•
Please also read the manual of the camera.
•
Depending on the area, this optional accessory may not be available.
For details, consult your local Panasonic dealer.
•
TY-CC10W
Wall-hanging
bracket
•
TY-WK3L2RW
The angle of
wall-hanging
bracket can be
adjusted in “zero
tilting (vertical)”
and “10-degree
tilting” for this TV.
(View from the side)
Holes for wall-hanging
bracket installation
Depth of screw:
minimum 4 mm
maximum 11 mm
Screw Thread Type: M6
Screw for fixing the TV onto the wall-hanging
bracket (not supplied with the TV)
200 mm
200 mm
Rear of the TV
Warning
•
Using other wall-hanging brackets, or installing a wall-hanging bracket by yourself
have the risk of personal injury and product damage. In order to maintain the
unit’s performance and safety, be absolutely sure to ask your dealer or a licensed
contractor to secure the wall-hanging brackets. Any damage caused by installing
without a qualified installer will void your warranty.
•
Do not mount the unit directly below ceiling lights (such as spotlights, floodlights
or halogen lights) which typically give off high heat. Doing so may warp or damage
plastic cabinet parts.
•
Take care when fixing wall brackets to the wall. Always ensure that there are no
electrical cables or pipes in the wall before hanging bracket.
•
To prevent fall and injury, remove the TV from its fixed wall position when it is no
longer in use.
Basic Connection
9
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any
leads.
Rear of the TV
Mains lead
RF cable
AC 220-240 V,
50 / 60 Hz
Satellite dish
Satellite cable
Aerial
Fully wired HDMI
compliant cable
Set top box
Note
•
Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.
•
Do not place the RF cable under the TV.
•
To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial), and the
correct terminating plug are required.
•
If a communal aerial system is used, you may require the correct connection cable and plug between
the wall aerial socket and the TV.
•
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial
system for your particular area and the accessories required.
•
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and
the costs incurred, are the responsibility of you, the Customer.
•
VIERA Link connection (p. 78)
•
Other equipment connection (p. 83 - 86, 95)
•
Read the manual of the external equipment, too.
Identifying Controls
10
Identifying Controls
TV
1
3
2
5
4
6
78
10
9
11
12
1 SD Card slot
2 USB3 port
3 HDMI4 terminal
4 AV3 terminals
5 Headphones jack
6 Remote control signal receiver
•
Do not place any objects between
the TV remote control signal receiver
and remote control.
7 C.A.T.S. (Contrast Automatic
Tracking System) sensor
•
Senses brightness to adjust picture
quality when [Eco Mode] in the
Picture Menu is set to [On]
(p. 33)
8 Power LED
•
Red: Standby
Green: On
Orange (flash): [USB Charge in
Standby] is [On]
•
When using the remote control,
indicates the TV has received a
command.
9 Mains power On / Off switch
•
Use to switch the mains power.
If you turned the TV Off during
Standby mode by the remote control
last time, the TV will be in Standby
mode when you turn the TV On with
Mains power On / Off switch.
10 Function select
•
[Volume] / [Contrast] / [Brightness] /
[Colour] / [Sharpness] / [Tint] (NTSC
signal) / [Bass] ([Music] or [Speech]
mode in the Sound Menu) / [Treble]
([Music] or [Speech] mode in the
Sound Menu) / [Balance] / [Digital
TV Auto Tuning] or [Analogue TV
Auto Tuning]
11 Channel Up / Down, Value change
(when using the F button), Switching
the TV On (press either button for
about 1 second when in Standby
mode)
12 Changes the input mode
About the Operation Guide - On Screen Displays
The Operation Guide is displayed at the bottom of the on Screen Displays.
The button used on this screen and manner of operation is displayed.
GUIDE
TV Guide: Landscape
11 Home
11:30 am - 12:00 pm DIY SOS : We open in the Battersbys
Time:
East ender
Shopping
DIY SOS
Topics
Red Cap Sports
Hot Wars
Market News
Live junction
Emerald The Bill Drama
10 O’ clock News BBC
Drama 1
Good bye NEWS
Live
D Home11
D World16
D Jade81
D Pearl84
D Sapphire100
D Ruby101
D Gold102
11:00am 12:00pm 12:30 pm 1 :00 pm
Wed 27 Oct 2010
All Types All Channels
Info
Page up
Portrait/Landscape
Select channel
View / Timer Prog.
EXIT
Select programme
RETURN
-24 hours +24 hours Prog.Type Favourites
Page down
Wed 27 Oct 2010 10:27 am
11:30am
The Bill
Holiday Program
Business News
News
Pepsi Char.
Drama 2
Coronation Street
Example: [TV Guide]
Operation
Guide
INFO
TV
EXIT
RETURN
RGYB
CH
Identifying Controls
11
Remote Control
INFO
TV
EXIT
OPTION
RETURN
TEXT
CH
POWER
STTL
INDEX HOLD
MENU ASPECT
INPUT
TV AV
REC
SD CARD
LAST VIEW
MUTE
jkl
ghi
mno
tuvpqrs
wxyz
abc def
POWER
RGY B
CHVOL
1
15
16
18
21
19
20
22
23
25
26
27
17
24
2
4
6
11
3
5
9
7
8
10
12
13
14
1 Standby On / Off switch
•
Switches TV On or Off standby
2 [Media Player] (p. 56)
•
Switches to SD Card and USB device
viewing / listening mode
3 [3D Settings] (p. 29)
4 [Main Menu] (p. 31)
•
Press to access Picture, Sound and Setup
Menus
5 Information
(p. 18)
•
Displays channel and programme
information
6 VIERA TOOLS
(p. 30)
•
Displays some special feature icons and
accesses easily
7 [VIERA Link Menu]
(p. 80)
•
Accesses VIERA Link Menu
8OK
•
Confirms selections and choices
•
Press after selecting channel positions to
quickly change programme
9 [Option Menu] (p. 19)
•
Easy optional setting for viewing, sound, etc.
10 Teletext
•
This button is not used for this model.
11 Subtitles (p. 17)
•
Displays subtitles
12 Numeric buttons
•
Changes channel
•
When in Standby mode, switches TV On
13 Sound Mute
•
Switches sound mute On or Off
14 Volume Up / Down
15 Input mode selection
•
TV - switches Digital TV / Analogue TV
mode (p. 17)
•
AV - switches to AV input mode from Input
Selection list (p. 22)
16 Aspect
(p. 20)
•
Changes aspect ratio
17 [VIERA Connect] (p. 16)
•
Displays VIERA Connect home screen
18 Exit
•
Returns to the normal viewing screen
19 Guide (p. 21)
•
Displays TV Guide
20 Cursor buttons
•
Makes selections and adjustments
21 Return
•
Returns to the previous menu / page
22 Coloured buttons
•
Used for the selection, navigation and
operation of various functions
23 Hold
•
Freeze / unfreeze picture (p. 17)
24 Index
•
This button is not used for this model.
25 Last View (p. 19)
•
Switches to previously viewed channel or
input modes
26 Channel Up / Down
•
Selects channel in sequence
27 Connected equipment operations
(p. 23, 65)
Auto Tuning
12
Auto Tuning
INFO
TV
RETURN
jkl
ghi
mno
tuvpqrs
wxyz
abc def
POWER
Y
EXIT
R
Search and store TV channels automatically.
•
These steps are not necessary if the setup has been completed by your local dealer.
1
Plug the TV into mains socket and switch On
•
You can now use the remote control to turn On the TV or
switch the TV to Standby mode. (Power LED: On)
2
Select your area
Select State / Territory
New South Wales / Australian Capital Territory
Victoria
Queensland
South Australia
Western Australia
Northern Territory
Tasmania
select
confirm
3
Start Auto Tuning
TV Signal Selection
Digital TV
Analogue TV
Start Auto Tuning
tune / skip / start
select
1 Select the TV Signal
: tune
: skip
Analogue Scan 21 68
Analogue Scan 68
Auto Tuning
Digital TV Scan
Searching
RF Ch
62
62
62
Channel Name
CBBC Channel
BBC Radio Wales
E4
Type
Digital TV
Digital TV
Digital TV
Quality
10
10
10
This will take about 6 minutes.
Digital TV: 4 Analogue TV: 2
Analogue TV Scan CH 0
75
CH 6
69
62
29
33
Cartoon Nwk Digital TV
Analogue TV
Analogue TV
10
-
-
2 Select [Start Auto Tuning]
•
Auto Tuning will start to search
for TV channels and store them.
The sorted channel order
depends upon the TV signal,
the broadcasting system and
reception conditions.
4
Setup the network connection
Select the network type
Network Setup
Select Wired or Wireless
Wired Wireless
Set Later
[Wired] : wired connection
(p. 14)
[Wireless] : wireless connection
(p. 15)
access
select
•
To setup later on or skip this
step
Select [Set Later] or
EXIT
5
Select [Home]
Please select your viewing environment.
Home Shop
∗
confirm
select
Auto Tuning is completed
Auto Tuning
13
∗
Viewing environment mode
Home : Recommended mode for viewing at home. Select [Home] for optimal picture / power
consumption. [Viewing Mode] is set as [Normal] (p. 32).
Shop : Demonstration mode to explain main features of this TV (for in-store display). [Viewing Mode] is
set as [Dynamic] (p. 32).
To return to viewing environment selection mode if you selected [Shop]
Shop
You have selected shop mode
RETURN
Please select your viewing environment.
Home Shop
Automatic Demo
Off On
RETURN
•
To change viewing environment mode later on, reset all settings by accessing Shipping Condition.
[Shipping Condition] (p. 49)
If you connect the Wireless LAN Adaptor later on, the confirmation screen will be displayed for
the setup.
Wireless LAN adaptor connected, do you want to
set it up?
No - Exit
Current network type : Wireless
No
Wireless LAN adaptor connection
Yes
•
To setup the Wireless LAN connection (p. 73)
Auto Tuning
14
Setup the network connection
Set up the network connection to enable the network service functions such as VIERA Connect, etc.
(p. 16, 77).
•
To set up the wireless connection, the Wireless LAN Adaptor is required.
•
Please note that this TV does not support wireless public access points.
•
Ensure the network connections and network environment are completed before starting setup.
1
Connect the LAN cable or Wireless LAN Adaptor
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a
broadband network environment.
Internet
environment
Internet
environment
Wired connection
Wireless connection
Access point
LAN cable (Shielded)
•
Use the Shielded Twist Pair (STP) LAN cable.
or
Wireless LAN Adaptor
(supplied)
•
Connect to the
USB 1, 2 or 3 port.
Rear of the TV
■ Setup Wireless
LAN Adaptor
Insert straight in
•
If you do not have any broadband network services, please consult your retailer for assistance.
•
For more information of the network connections (p. 69)
Caution
•
To use the Wireless LAN Adaptor, an Access Point needs to be obtained.
•
It is recommended to use the Wireless LAN Adaptor with the extension cable.
•
To avoid radio wave interference, keep the TV away from the devices such as other wireless
LAN devices, microwaves and the devices that use 2.4 GHz and 5 GHz signals when using the
Wireless LAN Adaptor.
Otherwise malfunction may occur.
2
Select [Wired] or [Wireless]
Network Setup
Select Wired or Wireless
Wired Wireless
Set Later
access
select
3
Start the settings
■ [Wired]
Select [Auto]
Acquire IP Address
Auto Manual
access
select
•
To set manually, select [Manual] and
set each item. For details
(p. 71)
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Connection Test
Automatically setup is done and the test of the
network connection starts.
: succeeded
The test is successful and the TV is
connected to the network.
: failed
Check the settings and connections, and
then select [Retry]
Auto Tuning
15
3
■ [Wireless]
Select the connection type
Connection Type
Please select network connection type.
WPS(Push button)
Search for access point
confirm
select
•
If your access point supports WPS (Push
button), then select this option. If not,
select [Search for access point].
■ [Search for access point]
Access points found automatically are listed.
Available Access Points
No.
1 Access Point A 11n(2.4GHz)
2 Access Point B 11n(5GHz)
3 Access Point C 11n(5GHz)
SSID Wireless type Encrypt
Reception
1 Select your desired access point
access
select
•
To search access points again
Y
•
For the information of the
highlighted access point
INFO
•
To set manually (p. 73)
R
Encryption Key Setting
Connection will be made with the following settings:SSID : Access Point A
Authentication type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
2 Access the encryption key input mode
•
If the selected access point is not encrypted, the confirmation
screen will be displayed. It is recommended to select the
encrypted access point.
A B C D E F G H I J K L M N
U V W X Y Z 0 1 2 3 4 5 6
a b c d e f g h i j k l m n
u v w x y z ( ) + - . * _
O P Q R S T
7 8 9 ! : #
o p q r s t
Access Point Settings
Encryption key
3 Enter the encryption key of the access point
(Set characters one by one)
select
set
Store
RETURN
•
You can set characters by using numeric buttons.
Access Point Settings
Encryption key is set to:XXXXXXXX
Select ‘Yes’ to confirm.
Select ‘No’ to change.
Yes
No
4 Select [Yes]
set
select
•
To re-enter the encryption key, select [No].
•
If the connection has failed, check the encryption key, settings
and positions of your access point. And then, follow the on
screen instructions.
■ [WPS(Push button)]
1) Please press the ‘WPS’ button on the access
point until its light ashes.
2) When the light is ashing select ‘Connect’ on
TV.
If you are unsure, please check the instruction
manual of the access point.
WPS(Push button)
1) Please press the ‘WPS’ button on the access
point until its light flashes.
2) When the light is flashing select ‘Connect’ on TV.
If you are unsure, please check the instruction
manual of the access point.
Connect
Press the WPS button on the access point until the light flashes.
And then, press the OK button to connect the Wireless LAN
Adaptor and the access point.
•
Ensure that your access point supports WPS for this method.
•
WPS: Wi-Fi Protected Setup™
Perform the connection test after the access point setting is finished
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Connection Test
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections, and then select
[Retry].
•
To set manually, select [Manual] and set each item.
For details
(p. 73)
4
Complete the network connection
(Press twice)
Using “VIERA Connect”
16
Using “VIERA Connect”
VIERA Connect is a gateway to the internet services unique to Panasonic and has expanded
VIERA CAST features greatly.
VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy
internet contents such as photos, videos, games, etc. from VIERA Connect home screen.
•
This TV has no full browser function and all features of websites may not be available.
EXIT
RETURN
jkl
ghi
mno
tuvpqrs
wxyz
abc def
POWER
RGY B
1
Turn power on
•
Press for about 1 second
•
Mains power On / Off switch should be
On. (p. 10)
Every time you turn on the TV, VIERA Connect
introduction banner appears. The banner is
subject to change.
Enjoy selected internet content with VIERA Connect.
Simply press the OK / INTERNET button
2
Access VIERA Connect
While the banner is displayed
•
The button design
varies depending on the
remote control.
or
INTERNET
Example :
Welcome to VIERA Connect
VIERA Connect™ home screen is subject to change without notice.
The services through VIERA Connect are operated by their respective service providers, and service may
be discontinued either temporarily or permanently without notice. Therefore, Panasonic will make no
warranty for the content or the continuity of the services.
All features of websites or content of the service may not be available.
Some content may be inappropriate for some viewers.
Some content may only be available for specic countries and may be presented in specic languages.
ENTER
Don’t show this message again
•
Depending on the usage conditions, it may
take a while to read all the data.
•
Messages might be displayed before
VIERA Connect home screen.
Please read these instructions carefully and
follow the on screen instructions.
Example : VIERA Connect home screen
MORE
BACK
•
To go to the next level
[MORE]
•
To back to the previous level
[BACK]
■
To exit from
VIERA Connect
EXIT
•
To set the
VIERA Connect
instruction banner
display off
[VIERA Connect
Banner] (p. 38)
■ How to operate VIERA Connect (current as of January, 2011)
•
To move the cursor / select the item
•
To access
•
To return to the previous screen
RETURN
•
When the key words are displayed on
colour bar
•
When options with
numbers are displayed
•
To return to VIERA Connect
home screen
R
G Y B
jkl
ghi
mno
tuvpqrs
wxyz
abc def
INTERNET
•
Video communication requires an exclusive Communication Camera TY-CC10W.
“Optional accessories” (p. 8)
For details, read the manual of the Communication Camera.
•
You can connect a keyboard and a gamepad via USB port for character input and playing games in VIERA Connect.
You can also operate the TV with a keyboard or a gamepad other than VIERA Connect features. For
more information “USB connection” (p. 92)
Note
•
If you cannot access VIERA Connect, check the network connections and settings (p. 14 - 15).
•
For more information of VIERA Connect (p. 77)
Watching TV
17
Watching TV
INFO
TV
EXIT
OPTION
STTL
HOLD
MENU ASPECT
INPUT
TV
LAST VIEW
jkl
ghi
mno
tuvpqrs
wxyz
abc def
POWER
RB
CH
•
When the TV is
switched to standby,
there will be a clicking
sound after a short
delay. This is normal.
1
Turn power on
•
Mains power On / Off switch should be
On. (p. 10)
■ VIERA Connect banner appears
You can access to VIERA Connect and enjoy the various
contents.
•
To remove this banner, leave for about 5 seconds
or press any buttons (except the buttons to access
VIERA Connect).
•
To set this banner display off
[VIERA Connect Banner] (p. 38)
2
Select Digital TV or Analogue TV mode
Digital TV
1 BBC ONE WALES
Coronation Street
Rating: PG
11:00 pm - 11:55 pm
Now
All Digital Channels
Select favourites
11:35 pm
Information banner appears
whenever you select a channel
•
For details (p. 18)
The selected mode is displayed.
•
It is also possible to select the
mode pressing the TV button
repeatedly on the side panel of the
TV. (p. 10)
3
Select a channel
CH
up
down
or
jkl
ghi
mno
tuvpqrs
wxyz
abc def
•
To select the two or three-digit
channel number, e.g. 112
abc
(in a short time)
•
If one or two-digit channel number,
e.g. 39
def
wxyz
(quickly changes the channel)
■ To select from the Channel List
6 Cartoon Nwk
7 BBC Radio Wales
8 BBC Radio Cymru
1 BBC ONE Wales
2 BBC THREE
3 BBCi
4 CBBC Channel
All Digital Channels
watch
select channel
Other useful functions
Hold Display subtitles
Freeze / unfreeze picture Display / hide subtitles (if available)
HOLD
STTL
•
Subtitles may not be displayed properly in 3D images.
Watching TV
18
Display Information banner
Display Information banner
INFO
•
Also appears when changing a channel
1
BBC ONE WALES
Coronation Street
Ratin
g
: PG
8:00 pm - 8:55 pm
8:35 pm
Now
All Digital Channels
1
CH23 SC1
ITV
11: 35 pm
All Analogue Channels
Analogue TV mode
Channel Status
Channel position
Programme Start / Finish time
Current time
Programme
Digital TV mode
Features available / Message meanings
Sound mute On
Subtitle service available
(Digital TV mode)
[Rating] Rating information
(p. 86)
(Digital TV mode)
Multiple image or audio
available (Digital TV mode)
[Bad signal] Poor TV signal quality
(Digital TV mode)
, ,
II
,
Audio mode (p. 89)
(Analogue TV mode)
[Encrypted] Scrambled programme
(Digital TV mode)
1 - 90 Off Timer remaining time
•
For settings (p. 19)
[AD] Audio Description service
available
•
This function can aid visuallyimpaired viewers by adding
an additional audio track to
describe events on-screen.
•
For settings (p. 36)
Channel name
•
To confirm another tuned channel name
•
To watch the programme listed in the banner
•
Information on the next programme
(Digital TV mode)
•
To select a favourite list (Digital TV mode)
(
if the favourite list is created
in [Favourites Edit] p. 41
)
B
•
To update the TV software (if available)
R
•
To hide
EXIT
•
Extra information
(press again to hide the banner)
(Digital TV mode)
INFO
•
To set display timeout
[Banner Display Timeout] (p. 38)
Watching TV
19
Display the selectable settings for the current programme
1 Check or change the current
programme status instantly
2 Select 3 Change
OPTION
access
select
select / change
store
[Audio Description] (Digital TV mode)
Set to [Auto] if the programme has Audio Description service, then you will hear an additional audio
track to describe events on screen
•
To adjust the volume for Audio Description [Audio Description Menu] (p. 36)
[Audio Selection] (Digital TV mode)
Allows you to select between alternative languages for sound tracks (if available)
[Dual Audio] (Digital TV mode)
Selects multiplex sound (if available)
[MPX] (Analogue TV mode)
Selects multiplex sound (if available) [Sound Menu] (p. 36)
[Volume Correction]
Adjusts the volume of an individual channel or input mode [Sound Menu] (p. 35)
Last view
Switch to previously viewed channel or input mode easily
LAST VIEW
•
Press again to return to the present view.
Note
•
Switching channel is not available while Direct TV Recording is in progress.
•
Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.
Off Timer
Turn the TV off automatically after a fixed period of time [Off / 15 / 30 / 45 / 60 / 75 / 90 minutes]
1 Display
the menu
MENU
2 Select [Timer] 3 Select [Off Timer] and set the time
Main Menu
Picture
Sound
Timer
Setup
15
30
45
60
75
90
Off
minutes
Off Timer
Auto Standby
minutes
minutes
minutes
minutes
minutes
access
select
[Off Timer]
store
select
the time
•
To cancel Set to off or turn the TV off.
•
To display the remaining time “Display Information banner” (p. 18)
•
When the remaining time is within 3 minutes, the remaining time will
flash on screen.
Watching TV
20
Change aspect ratio
Enjoy viewing the image at its optimum size and aspect.
Press repeatedly until you reach the desired mode
ASPECT
■ If Aspect Selection list is displayed
1 Display Aspect Selection list 2 While the list is displayed, select the mode
ASPECT
Aspect Selection
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Select
EXIT
RETURN
Change
Aspect Selection
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
change
select
[16:9] [14:9] [Just]
Directly displays
the image at 16:9
without distortion
(anamorphic).
Displays the image
at the standard 14:9
without distortion.
Displays a 4:3 image
full-screen. Stretching
is only noticeable at the
left and right edges.
[4:3] [4:3 Full] [Zoom1]
Displays the image
at the standard 4:3
without distortion.
Displays a 4:3 image
enlarged horizontally
to fit the screen.
•
Digital TV mode or
HD signal
Displays a 16:9
letterbox or 4:3 image
without distortion.
[Zoom2] [Zoom3]
Displays a 16:9
letterbox (anamorphic)
image full-screen
without distortion.
Displays a 2.35:1 letterbox (anamorphic) image
full-screen without distortion. At 16:9, displays the
image at its maximum (with slight enlargement).
Note
•
Only [16:9] and [4:3 Full] are available in Digital TV mode.
•
Only [16:9] and [4:3] are available in PC input mode.
•
Aspect is fixed to [16:9] when [Viewing Mode] is set to [Game] in the Picture Menu.
•
Aspect cannot be changed in 3D mode (aspect is fixed to [16:9] when [3D Mode Selection] is set to
[2D→3D]).
•
Aspect mode can be memorised separately for each SD (Standard definition) and HD (High definition)
signals except in Digital TV mode.
[Region Select] - Adjust the standard time [Daylight Saving Time] - Adjust for Summer Time
Select the region where you live to adjust the
standard time.
•
The time contained in the broadcast signal is
UTC (Universal Time coordinated) formally
known as GMT (Greenwich Mean Time).
Select time offset from the standard time for
Summer Time.
•
Normally select [Auto].
•
If there is a gap between displayed time and actual
time, set this function.
Region Standard time
Daylight Saving Time: Auto
(During Summer Time)
NSW / ACT
+10:00 +11:00
Victoria
Queensland +10:00
South Australia +9:30 +10:30
Western Australia +8:00
Northern Territory +9:30
Tasmania +10:00 +11:00
(Based on GMT)
•
These items can be set from [Other settings] in the Setup Menu. (p. 39)
Using TV Guide (Digital TV mode)
21
Using TV Guide (Digital TV mode)
Using TV Guide enables you to select a programme easily, view programme information, etc.
TV Guide - Electronic Programme Guide (EPG) provides an on screen listing of the current and future
programmes over the next seven days depending on broadcasters.
INPUT
TV
INFO
TV
EXIT
RGY B
■ To return to TV
EXIT
View TV Guide
Each time pressed, the layout will be changed. (Landscape / Portrait)
GUIDE
TV Guide: Landscape
11 Home
11:30 am - 12:00 pm DIY SOS : We open in the Battersbys
Time:
East ender
Shopping
DIY SOS
Topics
Red Cap Sports
Hot Wars
Market News
Live junction
Emerald The Bill Drama
10 O’ clock News BBC
Drama 1
Good bye NEWS
Live
D Home11
D World16
D Jade81
D Pearl84
D Sapphire100
D Ruby101
D Gold102
11:00 am 12:00 pm 12:30 pm 1 :00 pm
Wed 27 Oct 2010
All Types All Channels
Info
Page up
Portrait/Landscape
Select channel
View / Timer Prog.
EXIT
Select programme
RETURN
-24 hours +24 hours Prog.Type Favourites
Page down
Wed 27 Oct 2010 10:27 am
11:30 am
The Bill
Holiday Program
Business News
News
Pepsi Char.
Drama 2
Coronation Street
TV Guide date
Programme
Landscape (Displays by channel)
Current date and time
TV Guide time
Channel position and name
Portrait (Displays by time)
GUIDE
TV Guide: Portrait
In Memory of Lydia Shum (R) (S)11:00 am - 12:30 pm
12:30 pm - 2:00 pm
2:00 pm - 2:30 pm
2:30 pm - 3:00 pm
3:00 pm - 3:30 pm
3:30 pm - 4:00 pm
4:00 pm - 4:30 pm
W E Your Jun Mao Xia
Jin Mao Xiang (R) (C/M) (S)
Women Plaza ll
Wealth Blog
Life Journey (R) (C/M)
Smart Class
Home11 World16 Jade81 Pearl84 Sapphire100
27th Wed
All Types All Digital Channels
Page up
Select programme
View / Timer Prog.
EXIT
Select channel
RETURN
+24 hours Prog.Type Favourites
Page down
Info
Portrait/Landscape
2010/10/27 Wed 10:27 am
4:30 pm - 4:45 pm News
-24 hours
■ To watch the programme
Select the
current programme
or channel
Select “View”
watch
select
View
阿笨與阿占
7:30 pm - 8:00 pm
Timer Programming
watch
select
•
To use Timer Programming (p. 44)
■ To view a channel list of the selected favourite list
B
Favourites
All Digital channels
All Digital Channels
Favourites1
Favourites2
Favourites3
Favourites4
(Favourite list)
•
To list favourite channels
(p. 41)
Only Analogue TV channels are listed
All Analogue Channels
select a
favourite list
view
■ To view details of the programme
Select the programme
select
•
Press again to return to TV Guide.
INFO
■ To view a channel list of the selected type
Y
(Type list)
Prog.Type
All Types
All Types
Entertainment
Movie
Sport
Music
News
Children’s
select type
view
■ To the previous day
R
■ To the next day
G
Note
•
When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take
some time before the TV Guide is completely shown.
Watching External Inputs
22
Watching External Inputs
Connect the external equipment (VCRs, DVD equipment, PC, etc.) and you can watch through the
input.
•
To connect the equipment (p. 9, 83 - 85)
TV
INPUT
TV AV
CH
POWER
REC
jkl
ghi
mno
tuvpqrs
wxyz
abc def
■ To return to TV
TV
1
Display the Input selection menu
2
Select the input mode connected to the
equipment
Example (AV2)
AV1
AV2
AV3
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Input Selection
SD Card/USB
watch
select
Example (PC)
AV1
AV2
AV3
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Input Selection
SD Card/USB
watch
select
•
You can also select the input using the AV button on the remote
control or the side panel of the TV (p. 10).
Press the button repeatedly until the desired input is selected.
•
You can label or skip each input mode [Input Labels] (p. 48)
Skipped inputs will not be displayed when the AV button is pressed.
3
View
Example (AV2)
AV2
16:9
Displays the selected mode
•
If the external equipment has an aspect
adjustment function, set to [16:9].
Example (PC)
PC
640X480 / 60Hz
16:9
Displays the selected mode
•
You can also listen to PC sound with the
audio cable connected.
To connect (p. 85)
•
You can setup some functions
PC Setup (p. 37) in the Setup Menu.
•
For HDMI-compatible PC, possible to
connect to HDMI terminals (HDMI1
/ HDMI2 / HDMI3 / HDMI4) by using
HDMI cable (p. 87, 88).
Watching External Inputs
23
Operating the equipment with the TV remote control
The Panasonic equipment connected to the TV can be directly operated with the below buttons of this
TV remote control.
POWER
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operation
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD / video content: Skip to the previous track, title or chapter
(not available for the operation of USB HDD Recording)
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD / video content: Skip to the next track, title or chapter
(not available for the operation of USB HDD Recording)
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
CH
Programme Up / Down
Select programme
REC
Record
Start recording
How to change the code for the type of the equipment
Each type of Panasonic equipment has its own remote control code.
Please change the code for each equipment you want to operate.
If you operate the connected equipment in VIERA Link (p. 81), select the code “73”.
Press and hold
POWER
during the following operations
Enter the appropriate code
(see table below)
jkl
ghi
mno
tuvpqrs
wxyz
abc def
Press
Type of the equipment Code
DVD Recorder / DVD Player 70 (default)
Player theatre / Blu-ray Disc theatre 71
VCR 72
The equipment using in VIERA Link
“VIERA Link Control” (p. 75)
73
Note
•
Confirm if the remote control works correctly after changing the code.
•
The codes may be reset to default values if batteries are replaced.
•
Some operations may not be possible on some equipment models.
Viewing 3D images
24
Viewing 3D images
You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by
wearing the 3D Eyewear “Optional accessories” (p. 8)
•
For wearing the 3D Eyewear please read the manual of the 3D Eyewear.
This TV supports [Frame Sequential]∗1, [Side by Side]∗2 and [Top and Bottom]∗3 3D formats.
∗
1: The 3D format that the images for the left and right eyes are recorded with the high definition quality
and alternately played back
∗
2, ∗3: Other available 3D formats
Warning
About Prevention of Accidental Ingestion
•
Do not store any 3D Eyewear parts in places where small children can reach.
There is a danger small children could swallow such parts by mistake.
• If a child accidentally swallows such parts, seek immediate medical attention.
About Prohibition of Disassembly
•
Do not disassemble or modify the 3D Eyewear.
Caution
About 3D Eyewear
•
Do not drop, exert pressure on, or step on the 3D Eyewear.
Doing so may damage the glass section, which may result in injury.
• Always store the 3D Eyewear in the case provided when not in use.
•
Be careful of the tips of the frame when putting on the 3D Eyewear.
Accidentally inserting the tip of the frame into the eye may cause injury.
•
Always keep the 3D Eyewear in a cool, dry place.
Failure to do so may cause fire or electric shock.
•
Be careful not to trap a finger in the hinge section of the 3D Eyewear.
Doing so may result in injury.
• Pay special attention when children are using this product.
About Viewing of 3D Images
•
In the event that you experience dizziness, nausea, or other discomfort while viewing 3D
images, discontinue use and rest your eyes.
When you set the effect by using [3D Adjustment], take into account that the vision of 3D images
varies among different individuals.
•
Do not use the 3D Eyewear if you have a history of oversensitivity to light, heart problems, or
have any other existing medical condition.
Using the 3D Eyewear may cause the symptoms to worsen.
•
Stop using the 3D Eyewear immediately if you feel tired, discomfort, or any other abnormality.
Continuing to use the 3D Eyewear in such cases may cause you to feel unwell. Please take the
necessary rest before continuing use.
•
When watching 3D movies, take an appropriate length break after watching a movie.
•
When watching 3D content on interactive devices such as 3D games or computers, take an
appropriate length break after using for 30 - 60 minutes.
Prolonged use may cause eyesight fatigue.
•
When using the 3D Eyewear, be careful not to strike the television screen or other people by
mistake.
As the images are in 3D, the distance between the user and screen may be mistaken, causing the
user to strike the screen which may result in injury.
•
Use the 3D Eyewear when viewing 3D images.
•
When using the 3D Eyewear, make sure your eyes are on an approximately horizontal level.
•
If you suffer from myopia (short-sightedness), hyperopia (far-sightedness), astigmatism, or
have eyesight differences between the left and right eyes, please use corrective glasses or
other such methods to correct your eyesight before putting on the 3D Eyewear.
•
Stop using the 3D Eyewear if you can clearly see double images when viewing 3D content.
Prolonged use may cause eyesight fatigue.
•
View the screen at a distance at least 3 times further than the effective height of the screen.
Recommended distance:
For a 37-inch television, 1.4 m or more.
Using the 3D Eyewear at a distance closer than the recommended distance may cause eyesight
fatigue.
Viewing 3D images
25
Using 3D Eyewear
•
As a guide, 3D Eyewear should not be used by children younger than about 5 - 6 years old.
As it is difficult to judge younger children’s reactions to fatigue or discomfort, it may be difficult to
prevent them from suddenly feeling unwell.
• When this product is being used by a child, the parent or guardian should check to ensure that the
child’s eyes are not becoming tired.
•
When using the 3D Eyewear, do not place breakable objects near to the user.
The user may mistake the 3D objects they are viewing as real objects causing them to move, which
may cause damage to surrounding objects that may lead to injury.
•
Do not move around while wearing the 3D Eyewear.
The surrounding area appears dark, which may result in falling or other accidents that may cause
injury.
•
Only use the 3D Eyewear for the specified purpose.
•
Do not use if the 3D Eyewear is cracked or broken.
Doing so may result in injury or eyesight fatigue.
•
If a malfunction or fault occurs in the 3D Eyewear, stop use immediately.
Continuing to use the 3D Eyewear may result in injury, eyesight fatigue, or may cause you to feel
unwell.
•
Stop using the 3D Eyewear immediately if your skin feels unusual.
In rare cases, the paint or materials used in the 3D Eyewear may cause an allergic reaction.
•
Stop using the 3D Eyewear immediately if you experience any redness, pain, or itching on the
nose or temples.
Prolonged use may cause such symptoms due to excess pressure, which may result in the user
feeling unwell.
Using Precautions
Infra-red receiver section
•
Do not soil the infra-red receiver section or attach stickers etc. to it.
• Doing so may prevent the receiver from receiving signals from the television, which may prevent the
3D Eyewear from operating normally.
•
If the 3D Eyewear is affected by other infra-red data communication equipment, the 3D images
may not be displayed correctly.
Cautions during viewing
•
Do not use devices that emit strong electromagnetic waves (such as cellular phones or personal
transceivers) near the 3D Eyewear. Doing so may cause the 3D Eyewear to malfunction.
•
If the 3D Eyewear is used in a room in which fluorescent lights (50 Hz) are used, the light within
the room may appear to be flickering. In this case, either darken or switch off the fluorescent
lights when using the 3D Eyewear.
•
Wear the 3D Eyewear correctly. 3D images will not be correctly visible if the 3D Eyewear is worn
upside down or back-to-front.
•
Other kinds of displays (such as computer screens, digital clocks, or calculators etc.) may
be difficult to see while wearing the 3D Eyewear. Do not wear the 3D Eyewear when watching
anything other than 3D images.
Viewing 3D images
26
Charging the 3D Eyewear (rechargeable type)
Be sure to attach the provided ferrite core to the charging cable to reduce interference or electrical noise.
To charge when the TV is in the Standby mode
TV
MENU
1. Display the menu
MENU
“How To Use the Menu Functions” (p. 31)
2. Select [Setup]
3. Select [Other Settings]
2/2
Other Settings Access
access
select
4. Select [USB Charge in Standby] and set [On]
USB Charge in Standby
Off
Power Save
Region Select
Daylight Saving Time
Other Settings
On
access
select
[USB Charge
in Standby]
store
select
[On]
5. Turn off the television power, and set
the 3D Eyewear power switch to “OFF”
6. Connect as shown
USB connector
Mini USB connector
•
The indicator lamp lights red, and charging starts.
•
When the indicator lamp turns off, charging is complete.
(Approximately 2 hours required)
7. Remove the charging cable.
To charge when the TV is on
1. Turn off the television power, and set the 3D Eyewear power switch to “OFF”
2. Connect as shown above , and turn on the television power
•
The indicator lamp lights red, and charging starts.
•
When the indicator lamp turns off, charging is complete. (Approximately 2 hours required)
3. Turn off the television power, and remove the charging cable
Viewing 3D images
27
Available range for the 3D Eyewear
If the 3D Eyewear is placed outside the available area for about 5 minutes, the 3D Eyewear will be
turned off automatically.
: Available area to use the 3D Eyewear
35°35°
Approx.
3.2 m
Approx.
3.2 m
Approx.
3.2 m
20°
20°
Approx.
3.2 m
View from the top
View from the side
Note
•
The range may be shortened depending on the obstacles between the infrared sensors on the TV and
the 3D Eyewear, the dirt of the infrared sensors or the surrounding environment.
•
If you do not look toward the TV screen for a while when viewing 3D images, the 3D Eyewear may be
turned off automatically even if in the available area.
To view the 3D images
You can watch 3D images in the following cases:
•
When a 3D image supporting Blu-ray Disc is played on a 3D image supporting player/recorder
connected using a HDMI cable to a 3D image supporting television.
•
3D image supported broadcast (program)
•
3D Photo, 3D Movie taken by LUMIX/Camcorder.
•
2D→3D (Converts 2D images into 3D) “Change the view 3D ↔ 2D” (p. 28)
To view the contents or programmes
1 Set the power switch to “ON”.
(The indicator lamp will light for approximately 2 seconds, then flash once approximately every
2 seconds.)
2 Put on the 3D Eyewear
3 Watch the 3D images
When the HDMI receives information in which 3D mode is detected, 3D images are automatically
displayed according to the signal.
If the 3D images are not displayed correctly or the images cause discomfort, the images can be
adjusted by [3D Mode Selection] or [3D Settings].
•
Change the view 3D ↔ 2D, 3D settings (p. 28, 29)
■ After Use
1 Set the 3D Eyewear power switch to “OFF”.
(The 3D Eyewear indicator lamp turns off, and the power turns off.)
2 After using the 3D Eyewear, store it in the case provided.
Viewing 3D images
28
Change the view 3D ↔ 2D
Simply switches 3D ↔ 2D images (Auto mode)
R
3D Mode Selection
2D→3D
3D
2D
(“2D→3D”: 2D mode only)
set
select
•
R
Switches to Manual mode (see below)
■ Change 3D format (Manual mode)
1 Display [3D Mode Selection (Manual)]
R
2 Press 3D to cycle through the 3D format
3D Mode Selection (Manual)
Original
Side by Side - 3D
Frame Sequential - 3D
Side by Side - 2D
Top and Bottom - 2D
Frame Sequential - 2D
Top and Bottom - 3D
2D→3D
(example)
set
select
Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image
format
If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.
[3D Mode Selection]
Source
image format
[Original]
[Frame
Sequential
- 3D]
[Side by
Side - 3D]
[Top and
Bottom - 3D]
[2D→3D]
Frame Sequential
Normal 3D
∗
1
Side by Side (Full)
Normal 3D
∗
1
Side by Side
Normal 3D
∗
1
Top and Bottom
Normal 3D
∗
1
Normal format (2D)
Normal 3D
∗
1 : When selecting [Frame Sequential - 2D], [Side by Side - 2D] or [Top and Bottom - 2D], the images
will be displayed without 3D effect.
•
Depending on the player or broadcasts, the image may be different from the above illustrations.
Viewing 3D images
29
[3D Settings] (Adjust 3D images)
TV
MENU
1 Display the menu
MENU
“How To Use the Menu Functions” (p. 31)
2 Select [Picture]
3 Select [3D Settings]
2/2
3D-COMB
Area Dimmer Control
3D Settings
Advanced Settings
Screen Display
Reset to Defaults
Access
access
select
4 Select the item and set
2D→3D Depth
Edge Smoother
Min
Off
3D Adjustment
3D Detection
Safety Precautions
Picture Sequence
3D Signal Message
3D Settings
Access
Off
Normal
Off
adjust
select
access / store
■ 3D Adjustment
Changes 3D depth by adjusting left-right parallax.
1 Set “On” and adjusts “Effect”
+1
3D Adjustment On
Effect
3D Adjustment
select
adjust
3D Adjustment (On/Off)
Effect (-3 to +3)
Item Battery status
2D→3D Depth Adjusts 3D depth. Available only when [2D→3D] is selected in [3D Mode
Selection]. [Min] / [Mid] / [Max]
3D Adjustment See above. (3D adjustment [On] / [Off]), Effect ([-3] to [+3])
Picture Sequence Selects [Reverse] if you feel that the sense of depth is unusual.
[Normal] / [Reverse]
Edge Smoother Select [On] if you feel the contoured parts of an image are not smooth enough.
[Off] / [On]
3D Detection [On]: When the HDMI receives information in which 3D mode is detected, 3D
images are automatically displayed according to the signal.
(Switching may not occur depending on the signal.) [Off] / [On]
3D Signal Message [On]: Displays a message according to the signal received by the [3D
Detection]. [Off] / [On]
Safety Precautions Displays the precautions for viewing 3D images.
∗
The perceived three dimensional effects of the 3D Eyewear differ from person-to-person.
∗
If a signal received from an external device is different from the 3D setting of the TV, such as 2D signal
when the TV is set to 3D mode, the images may not be displayed correctly.
Loading...