Panasonic Viera TH-42PX700B, Viera TH-50PX700B, TH-50PX720B Operating Instructions Manual
TV
INPUT
EXIT
RETURN
OPTION
SD CARD
7
Operating Instructions
Plasma Television
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
U.K. Standard
Printed in Czech Republic
Model No. TH-42PX700B
TH-50PX700B
Information on Disposal for Users of Waste Electrical & Electronic Equipment
(private households)
This symbol on the products and/or accompanying documents means that used electrical and
electronic products should not be mixed with general household waste.
For proper treatment, recovery and recycling, please take these products to designated collection
points, where they will be accepted on a free of charge basis. Alternatively, in some countries you
may be able to return your products to your local retailer upon the purchase of an equivalent new
product.
Disposing of this product correctly will help to save valuable resources and prevent any potential negative
effects
on
human health and the environment which could otherwise arise from inappropriate
waste handling. Please contact your local authority for further details of your nearest designated collection point.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union.
If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of
disposal.
0844 844 3852
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial
number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your
purchase to aid in identification in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
2
3
Viewing Advanced FAQs, etc.Quick Start Guide
Contents
Turn your living room into a home theatre!
Experience an amazing level of multi-media excitement
•
Safety Precautions ······································ 4
(Warning & Caution)
•
Notes ··························································· 5
•
Maintenance ··············································· 5
Be Sure to Read
Advanced Features
•
How to Use Menu Functions ·····················21
(picture, sound quality, etc.)
•
DVB Settings (DVB) ·································· 26
(pay-TV, software update)
•
Editing Channels ·······································28
•
Tuning Channels ·······································30
•
Restore Settings ······································· 32
•
Owner ID ··················································· 33
•
Input Labels ·············································· 34
•
Displaying PC Screen on TV ·····················35
•
Recording Controls (DVB) ························ 36
•
Viewing from card (Photos) ·······················38
•
Q-Link Functions ······································· 40
•
HDMI Functions ·······································41
(HDMI terminal / VIERA Link)
•
External Equipment ···································44
Basic Features
•
Watching TV ··············································12
•
Using TV Guide ·········································14
•
Watching VCR, DVD and Satellites ··········16
•
Viewing Teletext ········································18
Enjoy your TV!
•
Technical Information ································46
•
FAQs ·························································50
•
On screen messages ································52
•
Specifications ············································ 54
•
Licence ······················································ 55
•
Index ························································· 55
FAQs, etc.
Accessories / Options
········· 6
Identifying Controls
·············· 7
Basic Connection
·················· 8
Auto Setup
······························ 10
Quick Start Guide
Receive digital terrestrial broadcastings using an integrated (Digital Video Broadcasting) tuner
(Display DVB programmes with TV Guide (p. 14) / Timer recording (p. 36) /
Register and instantly call up favourite programmes with Profile Edit (p. 29))
Sharp pictures with HDMI terminal
Control DVD recorder / VCR via TV with Q-Link connection
(p. 40)
Create home theatre and Panasonic equipment link-ups with
“VIERA Link” without complicated settings!
(p. 42)
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
TH-42PX700B Declaration of Conformity No 4493, 15 January 2007
TH-50PX700B Declaration of Conformity No 4494, 15 January 2007
Support Audio Description signal
(p. 12 and p. 22)
Audio description (AD) is an ancillary component associated with a broadcast which delivers a
verbal description of the visual scene as an aid to understanding and enjoyment particularly for
visually-impaired viewers.
HD ready
HD ready means the ability to display high-definition
pictures from HDMI and Component video inputs.
V-real 2
V-real 2 technology is the collective name for
original technologies developed by Panasonic
to enhance total image quality:
V-real 2 PROCESSOR: Enhance and output the incoming
video signals as high-image-quality signals. The resulting
video signals deliver the kind of high resolution that large
screens require.
V-real 2 DRIVER: Precisely controls panel drive to
optimise its performance. Achieves high image quality
with the equivalent of high steps of gradation.
V-real 2 PANEL: Provide clear, vivid display of the video
signal after processing by the V-real 2 Processor and
Driver.
High contrast
Contrast is the difference in light intensity
between the brightest white and the darkest black
that the VIERA can produce. The ability to express rich, deep
blacks is extremely important for displaying beautiful pictures.
High gradation
Gradation refers to the smoothness of colour
expression.
Rich, fine gradation is extremely important for maximising
the high resolution panel.
Lead-free display
All VIERA plasma display panels are
lead-free. This reduces the impact on the
environment when recycling or disposing of them in the
future.
High Contrast
MAX.
Gradation Steps
4 5
Safety Precautions
Warning & Caution
Notes
Display panel
Cabinet
Mains plug
Regular care: Gently wipe the surface clean of dirt by using a
soft cloth.
Major contamination: Wipe the surface clean using a soft cloth
dampened with clean water or diluted neutral detergent by
100 times of water. Then, using a soft dry cloth, evenly wipe
the surface clean until it is dry.
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or
water containing a small amount of neutral detergent. Then,
wring the cloth and wipe the surface clean with it. Finally, wipe
the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals.
(Moisture and dust may lead to fire or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
•
The surface of the display panel has been specially treated
and may be easily damaged.
Do not tap or scratch the surface with your fingernail or
other hard object.
•
Use care not to subject the surface to insect repellent,
solvent, thinner, or other volatile substances
(this may degrade surface quality).
Caution
•
Use care not to subject the TV’s surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
•
Use care not to subject surfaces to insect repellent, solvent,
thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
•
Do not allow the cabinet to make contact with a rubber or
PVC substance for a long time.
Maintenance
Do not block the rear
ventilation openings
Ventilation should not be impeded by
covering the ventilation openings with
items such as newspapers, tablecloths and
curtains.
Use only the dedicated
stands / mounting
equipment
Using an unauthorized stand or other
fixtures may make the TV shaky, risking
injury. Be sure to ask your local Panasonic
dealer to perform setup.
Use optional stands / mounts (p. 6).
Do not place the TV
on sloped or unstable
surfaces
The TV may fall off or tip over.
Do not expose to rain or
excessive moisture
To prevent damage which might result in
electric shock or fire, do not expose this TV
to rain or excessive moisture.
This TV must not be exposed to dripping or
splashing water and objects filled with liquid,
such as vases, must not be placed on top of
or above the TV.
Do not allow children to
handle SD card
As with a small object, SD card can be
swallowed by young children. Please
remove SD card immediately after use.
AC 220-240 V
50 / 60 Hz
Handling the mains plug
Ensure that the mains plug is easily accessible at
all times. The On / Off switch on this model does
not fully disconnect the TV from the mains supply.
Remove the mains plug from the wall socket when
the TV is not used for a prolonged period of time.
Ensure the grounding pin on the mains plug is
securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be
connected to a mains socket outlet with a protective
earthing connection.
Do not use any mains lead other than that provided
with this TV. (This may cause fire or electrical shock.)
Do not expose to direct sunlight
and other sources of heat
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fire never place any type
of candle or naked flame on top or near the TV.
Power source
This TV is designed to operate on 220-240V,
50 / 60 Hz AC.
Do not remove the cover
Do not remove the rear cover as live parts are
accessible when it is removed. There are no user
serviceable parts inside.
Transport only in upright position
Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the mains plug which is
marked with the letter E or by the Earth symbol or coloured GREEN or GREEN-AND-YELLOW.
The wire which is coloured BLUE must be connected to the terminal in the mains plug
which is marked with the letter N or coloured BLACK.
The wire which is coloured BROWN must be connected to the terminal in the mains plug
which is marked with the letter L or coloured RED.
How to replace the fuse.
Open the fuse compartment with a screwdriver and replace the fuse.
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings
identifying the terminals in your mains plug, proceed as follows.
WARNING: – THIS APPARATUS MUST BE EARTHED.
IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Green-and-Yellow: Earth
Blue: Neutral Brown: Live
If a new mains plug is to be fitted, please observe the wiring code as shown below.
If in any doubt, please consult a qualified electrician.
If the fitted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be
removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock
if the cut off mains plug is inserted into any 13 amp socket.
If the mains plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local Panasonic Dealer.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is
fitted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating
of 5 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark on the body of the fuse.
Electronic equipment
In particular, do not place video equipment near the TV
(electromagnetic interference may distort images / sound).
Equipment with an infrared sensor
Keep the TV away from these equipment
If no signal is received and no operation is performed in TV mode
for 30 minutes, the TV will automatically go to standby mode.
Auto power standby function
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“image
retention”).
This is not considered a malfunction and is not covered by the
warranty.
To prevent image retention, contrast is lowered automatically after a few
minutes if no signals are sent or no operations are performed. (p. 50)
Typical still images
Channel number and other logos
Image displayed in 4:3 mode
Video game
Computer image
This TV also emits infrared rays (this may affect operation of
other equipment).
Allow sufficient space
around the TV for radiated
heat
10
10
10
7
(cm)
Minimum distance
6
7
Quick Start Guide
TV
OPTION
SD CARD
EXIT
RETURN
INPUT
MULTI WINDOW DIRECT TV REC
P
ULL
Installing remote’s batteries
Batteries for the
Remote Control
Transmitter
(2)
•
R6 (UM3)
Identifying ControlsAccessories / Options
Clamper (2)
•
TMME258
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
•
Do not burn or breakup batteries.
Remote Control
Transmitter
•
N2QAYB000114
Using the clamper
Cursor buttons to make selections and
adjustments
Standard accessories
•
Identifying Controls
•
Accessories / Options
Check that you have the accessories and items shown
Operating Instructions
Pan European Guarantee Card
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Changes aspect ratio (p. 13)
Selects programmes in sequence
Teletext
(p. 18)
OK button to confirm selections and choices
Press after selecting programme positions to
quickly change programme.
VCR / DVD operations
(p. 17)
Volume
Programme Information (p. 13)
Teletext Index (p. 20)
Coloured buttons used for the
selection, navigation and operation of
various functions
EXIT (Returns to TV screen)
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection
(p. 40)
Programme / channel change buttons (0-9)
and Teletext page buttons.
(p. 12 and p. 19)
When in Standby mode, switches TV On.
1 Year Guarantee Registration
CRM (Customer Relationship Management)
Access VIERA Link Menu (p. 43)
TV Guide (p. 14)
Option menu
Sets the selectable settings of viewing
and sound options easily (p. 12)
Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus
(p. 21)
Subtitles
Showing subtitles
(p. 12)
Multi window (p. 13)
Surround (p. 22)
Changes the input mode
TV -
switches DVB (digital broadcasting)
/ Analogue mode
(p. 12)
AV - changes AV input mode (p. 16)
Viewing SD Card (p. 38)
Returns to the previous menu
Still picture (p. 13)
Teletext Hold (p. 20)
•
Do not bundle the RF cable and mains lead together (could cause
distorted image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory, follow the option’s assembly
manual to fix cables.
Mains Lead
•
K2CT3DH00018
Snap open
Snap shut
Remove from the TV
Push both side
hooks and pull
out
Rear of the TV
Caution
•
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
•
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take
steps to prevent the TV from tipping over.
•
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
Optional accessories
Pedestal
Plasma TV stand Wall-hanging
bracket
(vertical)
TY-WK42PV3W
(angle)
TY-WK42PR3W
TY-ST42D1-WG
TY-ST42D1-WK
TY-ST42D2-WG
TY-ST42D2-WK
TY-S42PX700W
(TH-42PX700B)
( TH-42PX700B)
TY-S50PX700W
(TH-50PX700B)
TY-ST50D1-WG
TY-ST50D1-WK
TY-ST50D2-WG
TY-ST50D2-WK
(TH-50PX700B)
Remote control signal receiver
DVB LED
•
Active for Timer Programming or
Standby for Direct TV Recording :orange (flash)
Timer Programming On :orange
Power LED
•
Standby: red
On: green
When using the remote
control, indicates the TV
has received a command.
Lift door to open
Mains power
On / Off switch
Increases or decreases the programme position by one. When a function is already displayed,
press to increase or decrease the selected function. When in Standby mode, switches TV On.
Changes the
input mode
Function select
•
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 30)
Headphones jack
(p. 44)
AV4 terminals
(p. 44)
SD CARD slot (p. 39)
C.A.T.S. (Contrast Automatic Tracking System) sensor
( senses brightness to adjust picture quality in “Auto” Mode in Picture Menu) (p. 22)
HDMI3 terminal
(p. 44)
8
9
Quick Start Guide
RF IN
RF OUT
RF OUT
RF IN
RF OUT
RF IN
RF IN
Basic Connection
•
Basic Connection
Mains lead (supplied)
Mains lead (supplied)
SCART cable
(fully wired)
DVD Recorder or VCR
RF
cable
Aerial AerialRear of the TV Rear of the TV
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet first.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
RF cable
RF cable
TV only TV, DVD Recorder or VCR
AC 220-240 V
50 / 60 Hz
AC 220-240 V
50 / 60 Hz
Note
•
Connect to AV3 for a DVD Recorder / VCR supporting Q-Link (p. 40).
•
Connect to AV1 for a Satellite receiver.
•
If connecting the TV and Satellite receiver with SCART cable, you can watch satellite broadcast by RGB input signal.
SCART:
21 pin connection used for video, audio and switching signals (Also known as Euro SCART and Peritel)
RF: Radio Frequency - Signal received from terrestrial aerial.
RGB / S-Video / Video:
Choose between these three video formats depending on personal preference and equipment requirement.
(RGB - Red, Green and Blue)
VCR: Video Cassette Recorder
DVD: Digital Versatile Disc
DVD Recorder
or VCR
SCART cable
(fully wired)
RF cable
Aerial
Mains lead (supplied)
Rear of the TV
Satellite receiver
Example 3
Connecting DVD Recorder / VCR and Sattelite receiver
AC 220-240 V
50 / 60 Hz
RF cable
RF cable
TV, DVD Recorder / VCR and Satellite
SCART cable
(fully wired)
SCART cable
(fully wired)
RF cable
Clamper
•
To unfasten
10
11
Quick Start Guide
OPTION
SD CARD
INPUT
EXIT
RETURN
TV
Page up
Page down
Change
1 of 2Owner ID
EXIT
RETURN
Please enter new PIN
PIN
* * * *
PIN entry
0 9
Auto Setup - Digital and Analogue
EXIT
This will take about 3 mins.
Analogue Scan 21 68
Digital Scan 21 68
62
Channel Service Name Type Quality
CBBC Channel DVB 10
62 BBC Radio Wales DVB 10
62 BBC Radio Cymru DVB 10
62 E4 DVB 10
62 Cartoon Nwk DVB 10
29 Analogue
-
33 BBC1 Analogue
-
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
Page up
Page down
Change
1 of 2Owner ID
EXIT
RETURN
Please enter new PIN
PIN
* * * *
PIN entry
0 9
EXIT
RETURN
Viewing Mode
Please select your preferred viewing mode.
Dynamic Normal Cinema Auto
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
(example: Owner ID)
On-screen operation
guide will help you.
Auto Setup
Following the on-screen operation
guide, enter your own choice of PIN
number, name, etc.
•
For detailed procedures
“Owner ID” (p. 33)
•
Make a note of the PIN number
in case you forget it.
Search and store TV channels automatically.
These steps are not necessary if the setup has been completed by your local dealer.
■
When inputting owner ID
Auto Setup is now complete and your TV is ready for viewing.
■
When inputting owner ID later
EXIT
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
2
•
If you input the ID later
“Owner ID” (p. 33)
•
If a compatible recording equipment
with Q-Link or similar technologies
(p. 40) is connected, analogue
channel information is automatically
downloaded to the equipment.
•
Auto Setup will start to search for
TV channels and store them in the
numbered order as specified by
the broadcasters.
•
To check programme list
at-a-glance
TV Guide (p. 14)
•
To edit channels
Editing Channels (p. 28)
Analogue Programme Edit (p. 31)
■
ON SCREEN HELP Instructions box
Open the main menu
Return to the previous menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
Many features available on this TV can be accessed via the On Screen Display
menu.
Note
•
If tuning has failed “Auto Setup” (p. 30).
•
If downloading has failed “Download” (p. 23).
•
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
■
How to use remote control
•
Auto Setup
Using the
On Screen
Displays
Exit the menu system and return to the normal viewing screen
•
Also possible to change the setting
in Picture Menu (p. 22)
3
Select the picture setting
select
set
12
13
Viewing
SD CARD
RETURN
DIRECT TV REC
OPTION
EXIT
INPUT
MULTI WINDOW
1 BBC ONE WALES
23:35
Corontation Street
20 : 00 ~ 20 : 55
Now
For info press
Change category
Profile 1
•
To select the two or three-digit programme number, e.g. 39
Watching TV
Select a channel
up
Volume
3
2
Note
•
To watch pay-TV (p. 27)
Select DVB (Digital Video Broadcasting) or
Analogue
Information banner
Turn power on
Mains power On / Off switch should be On.
(Press for about 1 second)
down
or
1
•
Watching TV
Watch TV,
DVD, etc.
in multi
window
DVD
Exit PandP Swap
AV1/RGB
AV1/RGB
Exit PandP Swap
DVD
AV1/RGBDVD
Exit PinP Swap
MULTI WINDOW
blue
yellow
View in multi window (p. 47)
Main screen
Colour bar
Sub screen
•
To exit multi window (return to the single-screen view with main screen)
MULTI WINDOW
•
To change the layout, images, first show the colour bar
To change the layout
green
yellow
To swap
blue
To exit multi window
red
To change the input mode or position of sub screen
•
Remote control operations
apply to the main screen.
Enjoy viewing two images at once, such as a TV programme and a DVD.
Picture-in-Picture mode (PinP) Picture-and-Picture mode (PandP)
green
Operations in multi window
Swap sub screen
for main screen
Change the input mode or position
by the remote control (p. 12 or p. 16)
Swap again
blue
blue
(in a short time)
■
Other useful functions (Operate after )
•
To select programmes using TV Guide (p. 14)
•
You can also select the mode using the TV button on the front panel
of the TV.
Change
aspect
ratio
Select
Change
EXIT
RETURN
Aspect Selection
16:9
14:9
4:3
Zoom1
Zoom2
Zoom3
Auto
Change the aspect ratio (p. 46)
Enjoy viewing the picture at its optimum size and aspect.
Aspect Selection list
•
To change the mode
•
To change the mode using the ASPECT button only
(Press repeatedly until you reach the desired mode)
Display Aspect
Selection list
During the list is displayed,
select the mode
Store
■
Other useful functions (Operate after )
Display
information
banner
1 BBC ONE WALES
23:35
Corontation Street
Mute Bad Signal Encrypted
20 : 00 ~ 20 : 55
Now
For info press
Change category
Profile 1
SubtitlesAD TXT Multi-Audio 45
Display programme information
•
To set display timeout
“Banner Display Timeout” (p. 23)
•
To hide
EXIT
•
Appears also when changing channel.
•
Information of another channel
•
Information on next programme
(DVB)
•
To watch the programme listed in the banner
•
Information banner operation
1st press
Display banner
2nd press
Banner + programme synopsis
(DVB)
3rd press
Exit
Features available
Programme
DVB: Programme
Start / Finish time
Analogue: Programme
Status
Channel Current time Category
To change the category
blue
Sound
mute
Scrambled
broadcasting
Teletext
Multiple audio
Off timer
Weak TV signal
Subtitle
Audio
description
•
“AD”, “Subtitles”, “TXT”, “Multi-Audio” indications are displayed
as available on particular channels or services, but may not be
available for all individual programmes being broadcast.
Press the button twice to confirm availability of these functions.
Mute Bad Signal Encrypted
Subtitles TXT Multi-Audio 45
1 BBC ONE WALES
23:35
Corontation Street
AD
20 : 00 ~ 20 : 55
Now
Exit info
Change category
All DVB Services
[AD]
Example:
Display / hide subtitles (if available)
•
To change the language for DVB “Preferred Subtitles” (p. 23) (If available)
Display
subtitles
OPTION
Check or change the current programme status instantly
•
To change
Subtitle Language (DVB mode)
Possible if the programme has some languages of subtitles
Multi Audio (DVB mode) Possible if the programme has some languages of sounds
NICAM (Analogue mode) Sound Menu (p. 22)
Volume Correction Adjusts volume of individual channel or input mode
Audio Description (DVB mode)
This function can aid visually-impaired viewers by adding an additional audio track to describe events on-screen.
Select “On” if the programme has this signal, then you will hear the description sound
select
change
Note
•
Also possible to change the settings in Menu list (p. 22 and p. 23).
Display the
current
programme
status
Main Menu
VIERA Link
Picture
Sound
Setup
1/2
DVB Timer Programming
DVB Profile Edit
DVB Service List
Q-Link Settings
Child Lock
Tuning Menu
Off Timer
Power on Preference
Teletext FASTEXT
TV
Setup Menu
Off
Display the menu
Select “Setup”
access
select
Select “Off Timer” and set the time
set
select
•
To cancel Set to “Off” or turn the TV off
•
To display the remaining time Information banner (p. 13)
•
When the remaining time is within 3 minutes, the remaining time will flash on screen.
Turn the TV off automatically after a fixed period
Off Timer
Freeze / unfreeze picture
Hold
14
15
Viewing
INPUT
OPTION
SD CARD
EXIT
RETURN
TV
Select programme
Timer Programming
EXIT
-24 Hr
Select channel
Change display mode
RETURN
+24 Hr Prog.type Category
1 BBC ODD D D D7 BBC T 14 E4 70 CBBC 72 Cartoo
All Service s
Free TV
Pay TV
Radio
Information
Profile 1
Profile 2
Profile 3
Profile 4
Categor y
All Service s
All Service s
Free TV
Pay TV
All DVB Services
All Analogue Services
Radio
Information
Profile 1
Profile 2
Profile 3
Profile 4
Categor y
All Service s
Red Ca p
The Bil l
Good by e
T erminato r
New s
The Bil l
S o
Hel l
Th e
21:0 0 21:3 0
Red Ca p
The Bil l
Good by e
T erminato r
New s
The Bil l
S o
Hel l
Th e
21:0 0 21:3 0
All T ype s
Movie s
New s
Entertainmen t
Spor t
Children’s
Educatio n
Lifestyl e
Dram a
Prog. typ e
All T ype s
TV Guide : Landscape Wed 05/08/04 18:50
Fri 6th
Prog.Types
All Types
Category
All Services
Timer Programming
Select channel
Select programme Info
Change display mode
RETURN
Page up
Page down
20:00 - 20:30 DIY SOS : We open in the Battersbys
-24 Hr +24 Hr Prog.type Category
EXIT
BBC ONE
Eastender DIY SOS The Bill Red Cap
19:30
So
Time: 20:00 20:30 21:00 21:30
BBC THR
Hot Wars Horiday Program
E4 Emmerdal. Coronation Street The Bill
CBBC Cha
10 O’ clock News BBC Pepsi Char. Good bye Hello
Cartoon Panorama Sex And The City Terminator
BBCi I’ m A Celebrity Pop Idol News The
BBC Radi
1
7
14
70
72
105
719
D
D
D
D
D
D
D Rugby 15 To 1 The Bill
red
green
blue
yellow
■
To change the layout
(Landscape / Portrait)
■
To previous day (DVB mode)
■
To next day (DVB mode)
■
To view a
programme list
of the selected
category
■
To view a
programme list
of the selected
type
(DVB mode)
Using TV Guide
Portrait (Displays by time)
select
category
TV Guide―Electronic Programme Guide (EPG) provides an on-screen listing of programmes currently
broadcast and future broadcasts over the next seven days (depending on the broadcaster).
Analogue broadcasts will be listed after DVB broadcasts. “D” means DVB channel and “A” means
Analogue channel.
TV Guide
date
Programme (TV Guide start page)
View TV Guide (landscape or portrait)
select
type
Current date and time
(Category list)
(Type list)
To list favourite channels (p. 29)
■
To return to TV
EXIT
view
view
Landscape
(Displays by
broadcaster)
View “Portrait” to see one channel at a time
View “Landscape” to see many channels
Note
•
When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time
before the TV Guide is completely shown.
•
Using TV Guide
■
Other useful functions (Operate after viewing TV Guide)
View details
of the
programme
(DVB mode)
TV Guide Wed 05/08/04 18:50
Timer Programming
RETURN
EXIT
Return to List
Select
the programme
select
Details
To return
to the start page
View details
TV Guide
time
Channel
Only analogue TV channels are listed
Timer
programming
to record
(DVB mode)
DVB Timer Programming Wed 05/08/04 18:50
Select timer
Edit timer
RETURN
Delete
EXIT
0 9
13BBC1
ITV1
6/8 FR
7/8 SA
18:00
21:30
20:00
22:30
12060Off
Off
Pos. Name Date Start End min.
DVB LED
Select the programme to be broadcast
■
To check / change / cancel a timer
programming event
“Timer Programming” (p. 36)
•
Orange DVB LED
(Rapid blinking during recording)
(Timer Programming screen)
select
set
■
To return to TV Guide
RETURN
DVB LED will turn on if Timer
Programming is set.
Note
•
When recording programmes, you must make the proper settings on the external
recording equipment connected to the TV.
If a compatible recording equipment with Q-Link or similar technologies is connected to
the TV (p. 8) and the “Q-Link Settings” (p. 23) are completed, no setting of the equipment
is required.
Also read the manual of the recording equipment.
•
If you select the programme now on the air, the confirmation screen whether watching or
recording will appear. Select “Timer Programming” to record from the time you finish the
Timer Programming setting.
Watch the
programme
(TV screen)
Select the channel
or programme
now on the air
select
access
View
Eastender
19:30- 20:00
Timer Programming
select
access
Select “View”
(DVB)
16
17
Viewing
Terminal
AV1 AV2 AV3
Component PC HDMI1 HDMI2 HDMI3
Manual input
default
setting in
“Input Labels”
AV1
AV1-RGB
AV2
AV2-S-Video
AV3
AV3-S-Video
AV3-RGB
Component PC HDMI1 HDMI2 HDMI3
Auto input
EC mode or
VIERA Link
EC/AV1
EC/AV1-RGB
EC/AV2
EC/AV2-S-Video
EC/AV3
EC/AV3-S-Video
EC/AV3-RGB
―
―
EC/HDMI1
•
Applicable for
EC mode and
VIERA Link
EC/HDMI2
•
Applicable for
VIERA Link
EC/HDMI3
•
Applicable for
VIERA Link
( )
(
)
OPTION
SD CARD
EXIT
RETURN
MULTI WINDOW DIRECT TV REC
INPUT
Watching VCR, DVD and Satellites
2
3
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch the input.
Connect the Satellite receiver and you can watch satellite broadcasts.
To connect the equipment (p. 8 and p. 9)
The Remote Control is capable of operating some functions of selected Panasonic external equipment.
Select the input mode connected to the equipment
Note
•
If the external equipment has an aspect adjustment function, set to “16:9”.
•
For details, see the manual of the equipment or ask your local dealer.
■
To return to TV
Display the Input select menu
Displays the selected mode
1
Turn the TV on
■
When connecting with SCART as example 2 or 3 (p. 8 and p. 9)
Receives input signals automatically when playback starts or
satellite receiver is switched on
•
Input signals are automatically identified by the SCART (pin 8)
terminal.
•
This function is also available for HDMI connections (p. 43).
■
If input mode is not switched automatically
Perform and
•
You can also select the input using the AV button on the remote
control or the front panel of the TV.
Press the button repeatedly until the desired input is selected.
•
You can label or skip each input modes “Input Labels” (p. 34)
•
Dependant on the setup of the equipment
Screen display
•
Watching VCR, DVD and Satellites
VCR / DVD switch
∗
Select VCR to operate Panasonic VCR or DVD equipment
Select DVD to operate Panasonic DVD equipment or Player home theatre
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD: Skip to the previous track or title
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD: Skip to the next track or title
Press and hold to search forward
Pause
Pause / Restart
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
Panasonic equipment connected to the TV can be directly operated with the remote control.
Note
•
Confirm correct operation after the code changed.
•
The codes will be reset to default values if batteries are replaced.
•
“DVD” means DVD player, DVD recorders and Recorder home theatre.
•
Some operations may not be possible on some equipment models.
∗
Setting your remote control to operate Panasonic VCR, DVD, etc.
Set the VCR / DVD switch to the appropriate position
Press and hold during the following operations
Enter the appropriate code for the equipment
to be controlled, see table below
Press
“VCR” position
Equipment Code
VCR 10 (default)
DVD 11
“DVD” position
Equipment Code
DVD 70 (default)
Player home theatre
71
Input Selection
AV1
AV2/AV2S
AV4/AV4S
AV3/AV3S
COMPONENT
PC
HDMI1
HDMI2
HDMI3
TV
4
View
select
watch
Loading...