Panasonic Viera TH-42PV8EYA, Viera TH-37PV8PA, Viera TH-42PV8PA, Viera TH-50PV8PA Operating Instructions Manual
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Please refer to Pan European Guarantee Card if you need to contact your local Panasonic dealer for assistance.
Operating Instructions
Plasma Television
Model No. TH-42PV8EYA
2
Turn your own living room into a movie theatre!
Experience an amazing level of multi-
3
Viewing Advanced FAQs, etc.
Quick Start Guide
media excitement
Enjoy rich multi-media
Camcorder
Amplifi er with
Speaker system
VCR
DVD player
DVD Recorder
Set top box
Up to 100,000 hours Plasma Panel Lifetime
The Plasma display panel used in the 2008 VIERA TV
range is rated for up to 100,000 hours.
∗
∗
This measurement is based on the time taken for the brightness of
the panel to reduce to half of it’s maximum level.
The time taken to reach this level may vary depending on the
image content and the environment where the TV is used.
Image retention and malfunctions are not taken into account.
Contents
Be Sure to Read
•
Safety Precautions ······································4
(Warning / Caution)
•
Notes ··························································· 5
•
Maintenance ··············································· 5
Quick Start Guide
•
Accessories / Options ········· 6
•
Identifying Controls ·············· 8
•
Basic Connection ················ 10
•
Auto Setup ······························ 12
Enjoy your TV!
Basic Features
•
Watching TV ·············································· 14
•
Viewing Teletext ········································ 16
•
Watching Videos and DVDs ······················ 18
Advanced Features
•
How to Use Menu Functions ·····················20
(picture, sound quality, etc.)
•
Editing Programmes ································· 24
•
Tuning Programmes ·································· 26
•
Control Programme Audience ·················· 28
•
Restore Settings ······································ 29
•
Input Labels ·············································· 30
•
Link Functions ··········································32
(Q-Link / VIERA Link)
•
External Equipment ··································· 38
FAQs, etc.
•
Technical Information ································ 40
•
FAQs ·························································42
•
Specifi cations ············································ 43
•
Licence ······················································ 44
4
Safety Precautions
Warning & Caution
Do not expose to direct
sunlight and other sources
of heat
•
Avoid exposing the TV to direct sunlight and other
sources of heat. To prevent fi re never place any
type of candle or naked fl ame on top or near the
TV.
Handling the mains plug and
lead
•
Ensure that the mains plug is easily accessible at
all times. The On / Off switch on this model does
not fully disconnect the TV from the mains supply.
Remove the mains plug from the wall socket when
the TV is not used for a prolonged period of time.
•
Ensure the earth pin on the mains plug is securely
connected to prevent electrical shock.
•
An apparatus with CLASS I construction shall
be connected to a mains socket outlet with a
protective earthing connection.
•
Do not use any mains lead other than that
provided with this TV. (This may cause fi re or
electrical shock.)
Do not place the TV on sloped
or unstable surfaces
•
The TV may fall off or tip over.
Power source
•
This TV is designed to operate on 220-240 V,
50 / 60 Hz AC.
Do not remove the cover
•
Do not remove the rear cover as live parts are accessible
when it is removed. There are no user serviceable parts
inside.
Do not expose your ears to
excessive volume from the
headphones
•
Irreversible damage can be caused.
Transport only in upright position
•
Transporting the TV with its display panel facing upright or downward may cause damage to the internal circuitry.
AC 220-240 V
50 / 60 Hz
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
This TV is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is fi tted in this
mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and
that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark on the body of the fuse.
If the mains plug contains a removable fuse cover, you must ensure that it is refi tted when the fuse is replaced.
If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained.
A replacement fuse cover may be purchased from your local Panasonic dealer.
Do not cut off the mains plug.
Do not use any other type of mains lead except the one supplied with this TV.
The supplied mains lead and moulded plug are designed to be used with this TV to avoid interference
and for your safety.
If the socket outlet in your home is not suitable, get it changed by a qualifi ed electrician.
If the plug or mains lead becomes damaged, purchase a replacement from an authorized dealer.
WARNING: – THIS TV MUST BE EARTHED.
How to replace the fuse.
Open the fuse compartment with a screwdriver and replace the fuse.
5
Use only the dedicated
pedestals / mounting
equipment
•
Using an unapproved pedestal or other
fi xtures may make the TV unstable,
risking injury. Be sure to ask your local
Panasonic dealer to perform setup.
•
Use approved pedestals / mounts
(p. 6).
Notes
■ Auto power standby function
•
If no signal is received and no operation is performed in TV
mode for 30 minutes, the TV will automatically go to standby
mode.
■
Keep the TV away from these types of equipment
•
Electronic equipment
In particular, do not place video equipment near the TV
(electromagnetic interference may distort images / sound).
•
Equipment with an infrared sensor
This TV also emits infrared rays (this may affect operation of
other equipment).
Do not display a still picture for a long time
This causes the image to remain on the plasma screen (“image
retention”).
This is not considered a malfunction and is not covered by the
warranty.
Typical still images
•
Programme number and other logos
•
Image displayed in 4:3 mode
•
Video game
To prevent image retention, contrast is lowered automatically
after a few minutes if no signals are sent or no operations are
performed. (p. 42)
Allow suffi cient space
around the TV for
radiated heat
Minimum distance
10
10
10 7
(cm)
•
When using the pedestal, keep the
space between the bottom of the TV
and the fl oor surface.
•
In case of using Wall-hanging bracket,
follow the manual of it.
Maintenance
Do not expose to rain or
excessive moisture
•
To prevent damage which might result
in electric shock or fi re, do not expose
this TV to rain or excessive moisture.
This TV must not be exposed to
dripping or splashing water and objects
fi lled with liquid, such as vases, must
not be placed on top of or above the TV.
Do not block the rear
ventilation openings
•
Ventilation should not be impeded by
covering the ventilation openings with
items such as newspapers, tablecloths
and curtains.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. (Moisture
and dust may lead to fi re or electrical shock.)
First, remove the mains plug from the socket outlet.
Display panel
Regular care: Gently wipe the surface clean of dirt by using a soft cloth.
Major contamination: Wipe the surface clean using a soft cloth
dampened with clean water or diluted neutral detergent (1 part
detergent to 100 parts water). Then, using a soft dry cloth, evenly
wipe the surface clean until it is dry.
Caution
•
The surface of the display panel has been specially treated and
may be easily damaged.
Do not tap or scratch the surface with your fi ngernail or other hard
object.
•
Take care not to subject the surface to insect repellent, solvent,
thinner, or other volatile substances
(this may degrade surface quality).
Cabinet, Pedestal
Regular care: Wipe the surface clean using a soft dry cloth.
Major contamination: Dampen a soft cloth with clean water or water
containing a small amount of neutral detergent. Then, wring the cloth
and wipe the surface clean with it. Finally, wipe the surface clean with
a dry cloth.
Caution
•
Take care not to subject the TV's surfaces to detergent.
(A liquid inside the TV could lead to product failure.)
•
Take care not to subject surfaces to insect repellent, solvent,
thinner, or other volatile substances
(this may deteriorate the surface by peeling the paint).
•
Do not allow the cabinet and pedestal to make contact with a
rubber or PVC substance for a long time.
6
TV
OK
132
465
798
0
+
-
-
+
Accessories / Options
Caution
•
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd) batteries.
•
Do not burn or breakup batteries.
Batteries must not be exposed to excessive heat such as sunshine, fi re or the like.
Caution
•
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
•
Carefully read the instructions accompanying the pedestal, and be absolutely sure to take steps to prevent
the TV from tipping over.
•
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product
damage.
Optional accessories
Wall-hanging bracket
(vertical)
•
TY-WK42PV3W
•
TY-WK42PV4W
(angle)
•
TY-WK42PR3W
•
TY-WK42PR4W
Batteries for the
Remote Control (2)
•
R6 (UM3)
Remote Control
•
N2QAYB000223
Standard accessories
Check that you have the accessories and items shown
Clamper
p. 8
Mains Lead
p. 11
Pedestal
p. 7
Operating Instructions
Pan European Guarantee Card
•
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
1
Pull open
Hook
2
Note the correct
polarity (+ or -)
Close
Installing / removing remote’s batteries
7
Quick Start Guide
A
R
D
L
D
B
■ Securing the TV
Use the assembly screws to fasten securely.
•
Make sure that the screws are securely tightened.
•
Carry out the work on a horizontal and level surface.
View from the bottom
■ Assembling the pedestal
Use the four assembly screws to fasten the left and
right poles to the base securely.
•
Make sure that the screws are securely tightened.
•
Forcing the assembly screws the wrong way will
strip the threads.
•
“L” or “R” mark is stamped on the bottom of the pole.
Front
Arrow mark
Hole for pedestal installation
•
Accessories / Options
Attaching the pedestal
Warning
Do not disassemble or modify the pedestal.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any other TV and displays.
•
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
•
If you use the pedestal while it is physically damaged, personal injury may result. Contact your nearest
Panasonic dealer immediately.
During set-up, make sure that all screws are securely tightened.
•
If insuffi cient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be
strong enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
•
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal
injury may result.
Two or more people are required to install and remove the TV.
•
If two or more people are not present, the TV may be dropped, and personal injury may result.
Assembly screw (4)
(silver)
•
XYN5+F18FN
Assembly screw (4)
(black)
•
THEL061N
Pole (2)
•
R : TBLA3626
•
L : TBLA3627
Base
•
TBLX0061
M5 × 18 M5 × 25
L
R
8
AV3
P
U
LL
Using the clamper
•
Do not bundle the RF cable and mains
lead together (could cause distorted
image).
•
Fix cables with clampers as necessary.
•
When using the optional accessory,
follow the option’s assembly manual to
fi x cables.
Rear of the TV
snaps
To loosen:
Keep
pushing both
side snaps
Set the
tip in the
hooks
Insert the clamper
in a hole
■ Attach the clamper ■ Bundle the cables
Keep
pushing
the knob
knobhooks
To remove
from the TV:
hole
TV
Lift door to open
Increases or decreases the programme position by one. When a function is already displayed,
press to increase or decrease the selected function. When in Standby mode, switches TV On.
Changes the
input mode
Function select
•
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup (p. 27)
Headphones jack
(p. 38)
AV3 terminals
(p. 38)
Accessories / Options
Identifying Controls
Mains power
On / Off switch
•
Switch On to turn on the TV
or turn the TV to standby
mode by the remote control
Remote control signal receiver
Power LED
•
Standby: red
On: green
•
When using the remote control, indicates the TV has received a command.
9
Quick Start Guide
TV
PROGRAMME
ASPECT
INPUT
RETURN
EXIT
MENU
OK
OPTION
DIRECT TV REC
VCR
132
465
798
0
REC
VCR DVD
TEXT F.P. INDEX HOLD
•
Identifying Controls
•
Accessories / Options
Identifying Controls
Remote Control
Cursor buttons
•
Makes selections and adjustments
Standby On / Off switch
•
Switches TV On or Off standby
Sound Mute
•
Switches sound mute On or Off
Surround (p. 22)
•
Switches Surround On or Off
Programme Up / Down
•
Selects programme in sequence
Teletext (p. 16)
•
Switches to teletext mode
OK
•
Confi rms selections and choices
•
Press after selecting programme positions to
quickly change programme
VCR / DVD Panasonic equipment
operations (p. 19)
Volume Up / Down
Programme Information (p. 15)
•
Displays programme information
Index (p. 17)
•
Returns to the teletext index page
(teletext mode)
Exit
•
Returns to the normal viewing screen
VIERA Link Menu (p. 35)
•
Press to access VIERA Link Menu directly
Aspect (p. 15)
•
Changes aspect ratio from Aspect Selection list
•
Also possible by pressing this button
repeatedly until you reach the desired aspect
Option Menu (p. 14)
•
Easy setting for viewing and sound
options
Main Menu (p. 20)
•
Press to access VIERA Link, Picture,
Sound and Setup Menus
Favourite Page (p. 17)
•
Calls up the teletext page stored in blue button
Input mode selection
•
TV - switches to TV mode (p. 18)
•
AV - switches to AV input mode from Input
Selection list (p. 18)
Direct TV Recording (p. 33 and p. 35)
•
Records programme immediately in
DVD Recorder / VCR with Q-Link or
VIERA Link connection
Hold
•
Freeze / unfreeze picture (p. 14)
•
Holds the current teletext page (teletext
mode) (p. 17)
Return
•
Returns to the previous menu
Numeric buttons
•
Changes programme and teletext pages
•
When in Standby mode, switches TV On
Coloured buttons
•
Used for the selection, navigation and
operation of various functions
10
RGB
VIDEO
S VIDEO
RGB
VIDEO
HDMI 1 HDMI 2
AV2AV1
COMPONENT
AUDIO
OUT
AUDIO
IN
Y
PB
P
R
LRL
R
RGB
VIDEO
S VIDEO
RGB
VIDEO
HDMI 1 HDMI 2
AV2AV1
COMPONENT
AUDIO
OUT
AUDIO
IN
Y
PB
P
R
LRL
R
RF OUT
RF IN
Basic Connection
Mains lead (supplied)
Mains lead (supplied)
SCART cable
(fully wired)
DVD Recorder or VCR
Aerial AerialRear of the TV Rear of the TV
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
When disconnecting the mains lead, be absolutely sure to disconnect the mains plug at the socket outlet fi rst.
Example 1
Connecting aerial
Example 2
Connecting DVD Recorder / VCR
RF cable
TV only TV, DVD Recorder or VCR
AC 220-240 V
50 / 60 Hz
AC 220-240 V
50 / 60 Hz
Note
•
Connect to AV1 / AV2 for a DVD Recorder / VCR supporting Q-Link (p. 33).
•
For HDMI-compatible equipment, possible to connect to HDMI terminals (HDMI1 / HDMI2) by using HDMI cable
(p. 38).
•
Q-Link connection p. 32
•
VIERA Link connection p. 32
•
Read the manual of the equipment too.
RF cable
RF cable
11
Quick Start Guide
RGB
VIDEO
S VIDEO
RGB
VIDEO
HDMI 1 HDMI 2
AV2AV1
COMPONENT
AUDIO
OUT
AUDIO
IN
Y
PB
P
R
LRL
R
RF OUT
RF IN
RF IN
RF OUT
RF IN
•
Basic Connection
Example 3
Connecting DVD Recorder / VCR and Set top box
TV, DVD Recorder / VCR and Set top box
DVD Recorder
or VCR
Fully wired HDMI
compliant cable
Aerial
Mains lead (supplied)
Rear of the TV
Set top box
AC 220-240 V
50 / 60 Hz
RF cable
RF cable
SCART cable
(fully wired)
SCART cable
(fully wired)
RF cable
RF cable
•
To remove from the TV:
Push until both
side tabs click
Press both tabs
and pull on
mains connector
to release
tabs
Make sure that
the mains lead is
securely fi xed.
12
INPUT
ASPECT
OPTION
DIRECT TV REC
VCR
132
465
798
0
PROGRAMME
REC
VCR DVD
TEXT F.P. INDEX HOLD
TV
RETURN
EXIT
MENU
OK
Auto Setup
This will take about 3 minutes.
EXIT
RETURN
CH 29
Channel Service Name
CH 33
Analogue: 2
Searching
Scan 2 99 21 41
Sending Preset Data
Please wait!
Remote control unavailable
0% 100%
Country
Portugal
Spain
Italy
France
Austria
Germany
Switzerland
Hungary
Czech
E.Eu
Ireland
Poland
Netherlands
Belgium
Finland
Norway
Sweden
Denmark
Greece
OSD Language
Nederlands
Português
Español
Italiano
Français
English
Deutsch
Latviešu
Slovenščina
Hrvatski
Lietuvių
eesti keel
Srpski
Românǎ
Български
Slovenčina
Magyar
čeština
Polski
Еλληνικά
Türkçe
Suomi
Norsk
Svenska
Dansk
Please select your viewing environment.
Home Shop
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
1
Auto Setup
Auto Setup is now complete and your TV is ready for viewing.
•
You can now use the remote
control to turn On the TV or turn
the TV to standby mode.
(Power LED: On)
•
To edit programmes
“Editing Programmes” (p. 24)
4
Start Auto Setup
•
If Q-Link, VIERA Link or similar
technology (p. 32), compatible
recorder is connected, programme,
language, country / region settings
are automatically downloaded to
the recorder.
•
Auto Setup will start to search for
TV programmes and store them.
The sorted programme order
depends upon the TV signal,
the broadcasting system and
reception conditions.
3
Select your country
2
Select the language
•
“Shop” and “Home” are equal
to “Dynamic” and “Normal”
respectively - “Viewing Mode” in
“Picture Menu” (p. 22)
5
Select the picture setting
Search and store TV programmes automatically.
These steps are not necessary if the setup has been completed by your local dealer.
•
Depending on the selected
countries, you may also be
required to select the region.
select
select
store
select
set
13
Quick Start Guide
Select
EXIT
Change
RETURN
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround Off
Volume Correction
Speaker Distance to Wall
Over 30cm
MPX Stereo
Sound Menu 1/2
Page up
Page down
•
Auto Setup
■ ON SCREEN HELP Instructions box
(example: Sound Menu)
Many features available on this TV can be accessed via the On Screen Display
menu.
■ How to use remote control
Using the
On Screen
Displays
MENU
Open the main menu
Move the cursor / select the menu
Move the cursor / adjust levels / select from a range of options
Access the menu / store settings after adjustments have been made or options
have been set
RETURN
Return to the previous menu
EXIT
Exit the menu system and return to the normal viewing screen
Note
•
If tuning has failed “Auto Setup” (p. 27)
•
If downloading has failed “Download” (p. 23)
•
To initialize all settings “Shipping Condition” (p. 29)
•
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On
with Mains power On / Off switch.
On-screen operation guide
will help you.
14
INPUT
RETURN
MENU
DIRECT TV REC
PROGRAMME
REC
VCR DVD
TEXT F.P. INDEX
TV
ASPECT
OK
OPTION
VCR
132
465
798
0
HOLD
EXIT
1 BBS
CH05 SC1 Coronation Street
All Services
BBCi
6
7
8
1
2
3
4
Select
Connect
EXIT
RETURN
Page up
Page down
VCR
132
465
798
0
Watching TV
■ Select a programme using Information banner (p. 15)
Possible to confi rm the programme name before selecting programmes.
Select a programme
up
Volume
2
Information banner appears
whenever you select a
programme
•
For details p. 15
Turn power on
(Press for about 1 second)
•
Mains power On / Off switch should be On. (p. 8)
down
or
1
•
To select the two or three-digit
programme number, e.g. 39
3 9
(in a short time)
Display Information banner
if it is not displayed
While the banner is displayed,
select the programme
•
Possible to set display
timeout in “Banner Display
Timeout” (p. 23).
HOLD
Freeze / unfreeze picture
Hold
■ Other useful functions
Display the
selectable
settings for
the current
programme
OPTION
Check or change the current
programme status instantly
•
To change
Teletext Character Set
Sets the teletext language
Setup Menu (p. 23)
MPX
Sound Menu (p. 22)
Volume Correction
Adjusts volume of individual programme or
input mode
Note
•
Also possible to change the settings in Menu list (p. 22 and p. 23).
select
change
•
To select from the Programme List
select
programme
watch
select programme
watch
Off Timer
Main Menu
VIERA Link
Picture
Sound
Setup
1/2
Service List Edit
Link Settings
Child Lock
Tuning Menu
Off Timer
OSD Language
Teletext TOP
Teletext Character Set West
Shipping Condition
Setup Menu
Off
MENU
Display the
menu
Select “Setup”
access
select
Select “Off Timer” and set the time
•
To cancel Set to “Off” or turn the TV off.
•
To display the remaining time Information banner (p. 15)
•
When the remaining time is within 3 minutes, the remaining time will fl ash on screen.
Turn the TV off automatically after a fi xed period
set
select
Loading...