Panasonic Viera TH-42PV600EY, Viera TH-50PV600EY Operating Instructions Manual

TV
N
F.P.
MULTI
WINDOW
6
Operating Instructions
English
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.
Information on Disposal for Users of Waste Electrical & Electronic Equipment (private households)
This symbol on the products and/or accompanying documents means that used electrical and electronic products should not be mixed with general household waste. For proper treatment, recovery and recycling, please take these products to designated collection points, where they will be accepted on a free of charge basis. Alternatively, in some countries you may be able to return your products to your local retailer upon the purchase of an equivalent new product. Disposing of this product correctly will help to save valuable resources and prevent any potential negative effects
on
human health and the environment which could otherwise arise from inappropriate waste handling. Please contact your local authority for further details of your nearest designated collection point. Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further information.
Information on Disposal in other Countries outside the European Union
This symbol is only valid in the European Union. If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal.
Printed in Czech Republic
Model No. TH-42PV600EY
TH-50PV600EY
Customer’s Record
The model number and serial number of this product may be found on its rear panel. You should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identifi cation in the event of theft or loss, and for Warranty Service purposes.
Model Number Serial Number
2 3
Viewing Advanced FAQs, etc.Quick Start Guide
Contents
Turn your living room into a home theatre!
Experience an amazing level of multi-media excitement
Safety Precautions ······································ 4 (Warning & Caution)
Notes ··························································· 5
Maintenance ··············································· 5
Be Sure to Read
Basic Features
Watching TV ··············································12
Viewing Teletext ········································14
Watching VCR, DVD and Satellites ··········16
Advanced Features
How to Use Menu Functions ·····················17 (picture, sound quality, etc.)
Displaying PC Screen on TV ·····················21
Editing and Setting Channels ····················22
Restore Settings ······································· 24
Owner ID ··················································· 25
Viewing from card (MPEG4 Videos and photos) ·····················26
Recording to card ······································28
Q-Link Functions ······································· 30
HDMI Functions ········································31
External Equipment ···································34
Enjoy your TV!
Technical Information ································36
FAQs ·························································39
On screen messages ································40
On screen messages (SD Card) ···············41
Index ························································· 42
Licence ······················································ 42
Specifi cations ············································43
FAQs, etc.
Accessories/Options
············ 6
Identifying Controls
·············· 7
Basic Connection
·················· 8
Auto Setup
······························ 10
Enjoy rich multi-media
Camcorder
Amplifi er with
Speaker system
VCR
DVD player
DVD recorder
Personal
computer
Satellite receiver
Quick Start Guide
Sharp pictures with HDMI terminal Control DVD recorder / VCR via TV with Q-Link connection
(p. 30)
Create home theatre and DVD recorder link-ups with "Control with HDMI" without complicated settings!
SD memory card
4 5
Safety Precautions
4 : 3
12
AC 220-240 V 50 / 60 Hz
Do not display a still picture for a long time
This causes the image to remain on the plasma screen ("after-image"). This is not considered a malfunction and is not covered by the warranty.
To prevent after-image, the screen saver is automatically activated after a few minutes if no signals are sent or no operations are performed. (p. 39)
Electronic equipment In particular, do not place video equipment near the unit (electromagnetic interference may distort images / sound). Equipment with an infrared sensor This TV also emits infrared rays (this may affect
operation of other equipment).
Keep the unit away from these equipment
Warning & Caution
Typical still images
Channel number and other logos Image displayed in 4:3 mode Video game Computer image
Notes
IMPORTANT: THE MOULDED MAINS PLUG
FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.
The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the mains plug which is marked with the letter E or by the Earth symbol
or coloured GREEN or GREEN-AND-YELLOW. The wire which is coloured BLUE must be connected to the terminal in the mains plug which is marked with the letter N or coloured BLACK. The wire which is coloured BROWN must be connected to the terminal in the mains plug which is marked with the letter L or coloured RED. How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.
As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your mains plug, proceed as follows.
WARNING: – THIS APPARATUS MUST BE EARTHED. IMPORTANT: – The wires in this mains lead are coloured in accordance with the following code: –
Green-and-Yellow: Earth
Blue: Neutral Brown: Live
If a new mains plug is to be fi tted, please observe the wiring code as shown below. If in any doubt, please consult a qualifi ed electrician.
If the fi tted moulded mains plug is unsuitable for the socket outlet in your home, then the fuse shall be removed and the mains plug cut off and disposed of safety. There is a danger of severe electrical shock if the cut off mains plug is inserted into any 13 amp socket.
If the mains plug contains a removable fuse cover, you must ensure that it is refi tted when the fuse is replaced. If you lose the fuse cover the mains plug must not be used until a replacement cover is obtained. A replacement fuse cover may be purchased from your local Panasonic Dealer.
This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 5 amp fuse is tted in this mains plug. Shall the fuse need to be replaced, please ensure that the replacement fuse has a rating of 5 amps and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
ASA
or the BSI mark on the body of the fuse.
Handling the mains plug
Ensure that the mains plug is easily accessible at all times. The On/Off switch on this model does not fully disconnect the TV from the mains supply. Remove the mains plug from the wall socket when the TV set is not used for a prolonged period of time. Ensure the grounding pin on the mains plug is securely connected to prevent electrical shock.
An apparatus with CLASS I construction shall be connected to a mains socket outlet with a protective earthing connection.
Note
If the set is not switched off when the TV station stops transmitting, it will automatically go to standby mode after 30 minutes. This function will operate only in TV mode.
Do not expose to direct sunlight and other sources of heat
Avoid exposing the TV set to direct sunlight and other sources of heat. To prevent fi re never place any type of candle or naked fl ame on top or near the TV set.
Power source
This TV set is designed to operate on 220-240V, 50 / 60 Hz AC.
Do not remove the cover
Do not remove the rear cover as live parts are accessible when it is removed. There are no user serviceable parts inside.
Do not expose to rain or excessive moisture
To prevent damage which might result in electric shock or fi re, do not expose this TV set to rain or excessive moisture.
This TV must not be exposed to dripping or
splashing water and objects fi lled with liquid, such as vases, must not be placed on top of or above the TV.
Do not block the rear ventilation openings
Ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths and curtains.
Cabinet and display panel care
Remove the mains plug from the wall socket.
The cabinet and display panel can be cleaned
with a soft cloth moistened with mild detergent and water. Do not use solutions containing benzol or petroleum.
TV sets can produce static electricity, care must
be taken whenever touching the TV screen.
Use only the dedicated stands / mounting equipment
Using an unauthorized stand or other fi xtures may make the unit shaky, risking injury. Be sure to ask your local Panasonic dealer to perform setup. Use optional stands / mounts (p. 6).
Do not place the TV on sloped or unstable surfaces
The TV may fall off or tip over.
Display panel
Cabinet
Mains plug
Daily care:
Gently wipe the surface clean of dirt by using a soft cloth. Major contamination: Wipe the surface clean using a soft cloth dampened with clean water or water containing a small amount of neutral detergent. Then, using a soft dry cloth, evenly wipe the surface clean until it is dry.
Daily care: Wipe the surface clean using a soft dry cloth. Major contamination: Dampen a soft cloth with clean water or water containing a small amount of neutral detergent. Then, wring the cloth and wipe the surface clean with it. Finally, wipe the surface clean with a dry cloth.
Wipe the mains plug with a dry cloth at regular intervals. (Moisture and dust may lead to fi re or electrical shock.)
First, remove the mains plug from the socket outlet.
Caution
The surface of the display panel has been specially treated and may be easily damaged. Do not tap or scratch the surface with your fi ngernail or other hard object.
Use care not to subject the surface to insect repellent, solvent, thinner, or other volatile substances (this may degrade surface quality).
Caution
Use care not to subject the TV unit's surfaces to detergent. (A liquid inside the TV unit could lead to product failure.)
Use care not to subject surfaces to insect repellent, solvent, thinner, or other volatile substances (this may deteriorate the surface by peeling the paint).
Do not allow the cabinet to make contact with a rubber or PVC substance for a long time.
Maintenance
Allow suffi cient space around the unit for radiated heat
10
10
6
10
7
(cm)
6 7
Quick Start Guide
TV
AV4
S-V V L R
N
F.P.
MULTI
WINDOW
Batteries for the Remote Control Transmitter
(2)
R6 (UM3)
Identifying ControlsAccessories/Options
Clamper (2)
TMME258
Mains Lead
K2CT3DH00018
Snap open
Snap shut
Caution
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control unit.
Do not mix old and new batteries.
Do not mix different battery types (such as alkaline and manganese batteries). Do not use rechargeable (Ni-Cd) batteries.
Do not burn or breakup batteries.
Remote Control Transmitter
N2QAYB000025
Operating Instructions
Pan European Guarantee Card
Attaching the cable clampers
Do not bundle the RF cable and mains lead together (could cause distorted image).
Fix cables with clampers as necessary.
When using the optional accessory, follow the option’s assembly manual to fi x cables.
Standard accessories
Identifying Controls
Accessories/Options
Check that you have the accessories and items shown
Remove from the TV unit
Push both side hooks and pull out
Ferrite core
J0KF00000018
Installing remote's batteries
1
Pull open
Hook
2
Note the correct polarity (+ or -)
Close
Optional accessories
Pedestal Plasma TV stand Wall-hanging
bracket (vertical)
TY-WK42PV3W
(angle)
TY-WK42PR3W
TY-ST42P600W
TY-S42PX600W
(TH-42PV600EY)
TY-S50PX600W
(TH-50PV600EY)
(TH-42PV600EY)
TY-ST42P60W
(TH-42PV600EY)
TY-ST50P60W
(TH-50PV600EY)
TY-ST50P600W
(TH-50PV600EY)
Rear of the TV
Function select
Increases or decreases the programme position by one. When a function is already displayed, press to increase or decrease the selected function. When in Standby mode, switches TV On.
MAINS Power On / Off switch
Lift door to open
C.A.T.S. (Contrast Automatic Tracking System) sensor
(senses brightness to adjust picture quality in "Auto" viewing mode) (p. 19)
Power LED
Remote control signal receiver
STR (Normalisation store) (Stores tuning and other function settings)
TV/AV switch
Volume / Contrast / Brightness / Colour /
Sharpness / Tint (NTSC mode) / Bass / Treble / Balance / Manual tuning (p. 22)
Cursor buttons to make selections and adjustments
Headphones jack
(p. 34)
AV4 terminals (p. 34)
Red light indicates Standby mode. When using the remote control, indicates the TV has received a command.
SD CARD slot (p. 27)
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Changes picture aspect ratio
(p. 13)
Normalizes (p. 18)
(Resets settings)
Selects programmes in sequence
Viewing a favourite teletext channel
(p. 15)
Teletext (p. 14)
OK button to confi rm selections and choices. Press after selecting programme positions to avoid delay.
VCR / DVD operations (p. 16)
Volume
Programme Information
(p. 13)
Teletext Index (p. 15)
Still Picture (p. 13)
Coloured buttons used for the selection, navigation and operation of various functions.
EXIT (Returns to TV screen)
Switch between viewing TV or AV input.
(p. 16)
DIRECT TV Recording
To immediately record programme in VCR / DVD recorder with Q-Link connection (p. 30)
MENU Press to access the Picture, Sound and Setup menus
(p. 18)
Direct channel access Use together with numeric buttons to access TV channels by entering broadcast channel number. (p. 12)
SD menu (p. 26 and p. 29)
SD Recording (p. 28)
MULTI WINDOW (p. 13)
Switches SRS TruSurround XT On / Off (p. 19)
Programme / channel change buttons (0-9) and Teletext page buttons.
(p. 12 and p. 14)
When in Standby mode, switches TV On.
Caution
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced contractor to secure the wall-hanging brackets.
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take steps to prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause its paneling to crack.
8 9
Quick Start Guide
RF OUT
RF IN
RF OUT
RF IN
RF IN
RGB
VIDEO
S-VIDEO
AV1
VIDEO
S-VIDEO
RGB
VIDEO
AV3
(Q-Link)
AV2
(Q-Link)
COMPONENT
COMPONENT
RGB
VIDEO
S-VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
AV3
(Q-Link)
AV2
(Q-Link)
AV1
COMPONENT
AV1
RF OUT
RF IN
RGB
VIDEO
S-VIDEO
VIDEO
S-VIDEO
RGB
VIDEO
AV3
(Q-Link)
AV2
(Q-Link)
Basic Connection
DVD Recorder
or VCR
SCART cable (fully wired)
RF cable
Aerial
Mains lead (supplied)
Clamper
To unfasten
Mains lead (supplied) Mains lead (supplied)
SCART cable (fully wired)
DVD Recorder or VCR
RF cable
Aerial Aerial
Rear of the TV Rear of the TV
SCART: 21 pin connection used for video, audio and switching signals (Also known as Euro SCART and Peritel) RF:
Radio Frequency - Signal received from terrestrial aerial.
RGB / S-Video / Video:
Choose between these three video formats depending on personal preference and equipment requirement. (RGB - Red, Green and Blue)
VCR:
Video Cassette Recorder
Rear of the TV
Satellite receiver
External equipment and cables shown are not supplied with this TV. Please ensure that the TV is disconnected from the mains socket before attaching or disconnecting any leads.
Basic Connection
SCART cable (fully wired)
Ex.
1
Connecting aerial (TV only)
Ex.
2
Connecting DVD Recorder (VCR) (TV, DVD Recorder and VCR
)
Note
Connect to AV3 for a DVD Recorder / VCR supporting Q-Link (p. 30).
Connect to AV1 for a Satellite receiver.
If connecting the TV and Satellite receiver with SCART cable, you can watch satellite broadcast by RGB input signal.
Ex.
3
Connecting DVD Recorder (VCR) and Satellite receiver (
TV, DVD Recorder, VCR and satellite
)
AC 220-240 V 50 / 60 Hz
SCART cable (fully wired)
RF cable
RF cable
RF cable
RF cable
RF cable
10 11
Quick Start Guide
TV
AUTO SETUP IN PROGRESS SEARCHING : PLEASE WAIT
01 99:21 41
CH12
Exit
DOWNLOAD IN PROGRESS
PLEASE WAIT
Programme : 63
Remote control unavailable
012345678 9
Y ou now have the opportunit y to enter your details an d help the police crack crim e see instruction boo k
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
Exit
Select character
Change character
Store Owner ID
012345678 9
Y ou now have the opportunit y to enter your details an d help the police crack crim e see instruction boo k
PIN NUMBER :
NAME :
POSTCODE :
Owner ID
HOUSE NO :
∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗ ∗
∗ ∗ ∗ ∗
Exit
Select character
Change character
Store Owner ID
Plug the TV into mains socket and switch On
(Takes a few seconds to be displayed)
Usable characters and numbers
Auto Setup
Following the on-screen operation guide, enter your own choice of PIN number, name, etc.
For detailed procedures
"Owner ID" (p. 25)
Make a note of the PIN number in case you forget it.
Search and store TV channels automatically. These steps are not necessary if the setup has been completed by your local dealer.
When inputting owner ID
Auto Setup is now complete and your TV is ready for viewing.
When inputting owner ID later
You can now use the remote control to turn On the unit or turn the unit to standby mode. (Power LED: On)
2
If you input the ID later
"Owner ID" (p. 25)
If a compatible recording equipment with Q-Link or similar technologies (p. 30) is connected, channel information is automatically downloaded to the equipment.
Auto Setup will start to search for TV channels and store them.
To check programme list at-a-glance
Programme Guide (p. 12)
To edit channels
"Programme edit" (p. 23)
Auto Setup
The sorted programme order depends upon the TV signal, the broadcasting system and reception conditions.
Note
If tuning and downloading data have failed, perform "Auto setup" (p. 23).
If you turned the TV Off during Standby mode last time, the TV will be in Standby mode when you turn the TV On with MAINS power On / Off switch.
1
(example: Owner ID)
On-screen operation guide will help you.
ON SCREEN HELP Instructions box
used to open the main menus and to return to the previous menu
used to exit the menu system and return to the normal viewing screen
used to move the cursor and select menus
used to access menus, adjust levels or to select from a range of options
used to store settings after adjustments have been made or options have been set
Many features available on this TV can be accessed via the On Screen Display menu.
How to use remote control
Using the On Screen Displays
12 13
Viewing
TV
MULTI
WINDOW
red
green
yellow
blue
Watching TV
Select a channel
up
Volume
2
Turn power on
Freeze / unfreeze picture
Hold
Other Useful Functions (Operate after )
down
Display status information
Display / hide status information
Displays information for a few seconds.
or
1
Watch TV, DVD, etc. in multi window
SwapSource
2
AV1
SwapSource
2
AV1
SwapSource
2
AV1
SwapSource
2
AV1
MULTI
WINDOW
blue
red red
red
View in multi window (p. 38)
Main screen
Colour bar Sub
screen
Remote control operations apply to the main screen.
To change the layout, etc. fi rst show the colour bar
MULTI
WINDOW
To change the layout
red
green
To swap
blue
To change the source of sub screen
yellow
To return to the normal single-screen view
MULTI
WINDOW
Prog. Name Chan.
VCR :
1 : 2 : 3 : 4 : 5 : 6 : 7 : 8 :
9 : 10 : 11
:
12 :
CH21 CH44 CH51 CH41 CH47 CH23 CH26 CH58
-
-
-
-
-
Das Erste ZDF RTL
Prog. Name Chan.
13 : 14 : 15 : 16 : 17 : 18 : 19 : 20 : 21 : 22 : 23 : 24 :
-
-
-
-
-
-
-
-
-
-
-
-
select page
(Corresponds to the colour bar)
select
programme
watch
1 BBC 1
MAINS power On / Off switch should be On. Picture will appear.
(Press for about 1 second)
1 CH_ _
To select a channel inputting the channel number, e.g. 39.
To select a channel using programme guide
Change aspect ratio
14 : 9
Each press changes the mode.
While the bar is displayed
red
green
Auto aspect / 16:9 / 14:9 / 4:3 / Zoom1 / Zoom2 / Zoom3
To change the mode with colour buttons
Change the aspect ratio (p. 36)
Enjoy viewing the picture at its optimum size and aspect
Watching TV
Loading...
+ 15 hidden pages