Panasonic Viera TC-50PS24, TC-58PS24, TC-65PS24 Operating Instructions Manual

TM

Customer’s Record

The model number and serial number of this product can be found on its back cover. You should note this serial number in
the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid
in identification in the event of theft or loss, and for Warranty Service purposes.

Model Number Serial Number

Anotación del cliente

El modelo y el número de serie de este producto se encuentran en su panel posterior. Deberá anotarlos en el espacio
provisto a continuación y guardar este manual, más el recibo de su compra, como prueba permanente de su adquisición,
para que le sirva de ayuda al identificarlo en el caso de que le sea sustraído o lo pierda, y también para disponer de los
servicios que le ofrece la garantía.

Modelo Número de serie

Panasonic Consumer Electronics Company,
Division of Panasonic Corporation of North America

One Panasonic Way, Secaucus
New Jersey 07094 U.S.A.

Panasonic Canada Inc.

5770 Ambler Drive
Mississauga, Ontario
L4W 2T3 CANADA

©

2010 Panasonic Corporation of North America. All Rights Reserved.

Printed in U.S.A.

©

2010 Panasonic Corporation of North America. Todos los Derechos Reservados.

Impreso en EE.UU.

M0110-0

Operating Instructions

50” Class 1080p Plasma HDTV

(49.9 inches measured diagonally)

Manual de instrucciones

Televisión de alta definición de 1080p y
clase

50”

de Plasma

(49,9 pulgadas medidas diagonalmente)

For more detailed instructions, refer to the Operating Instructions
on the CD-ROM.
To view the Operating Instructions on the CD-ROM, you need a
computer equipped with a CD-ROM drive, and Adobe® Reader®
(Version 7.0 or later is recommended) installed on your computer.

Depending on the operating system or settings on your computer, the
Operating Instructions may not start automatically.
In this case, open the PDF file under the “MANUAL” folder manually to view
the instructions.

Para obtener instrucciones más detalladas, consulte las instrucciones
de manejo contenidas en el CD-ROM.
Para ver las instrucciones de manejo contenidas en el CD-ROM, se
necesita un ordenador equipado con una unidad de CD-ROM, y que
tenga instalado Adobe® Reader® (se recomienda la versión 7.0 o
posterior).

Dependiendo del sistema operativo o de las configuraciones del ordenador,
las nstrucciones de manejo pueden no iniciarse automáticamente.
En tal caso, abra manualmente el archivo PDF en “MANUAL” carpeta para
visualizar las instrucciones.

TQB2AA0574

Gracias por su decisión de comprar este producto marca Panasonic.
Lea estas instrucciones antes de utilizar su televisor y guárdelas para consultarlas en el futuro.
Las imágenes mostradas en este manual tienen solamente fines ilustrativos.

Model No.

Número de modelo

TC-50PS24

Español

English

Thank you for purchasing this Panasonic product.
Please read these instructions before operating your set and retain them for future reference.
The images shown in this manual are for illustrative purposes only.

For assistance (U.S.A./Puerto Rico), please call:

1-877-95-VIERA (958-4372) or visit us at www.panasonic.com/contactinfo

For assistance (Canada), please call:

1-866-330-0014 or visit us at www.vieraconcierge.ca

Para solicitar ayuda (EE.UU./Puerto Rico), llame al:

1-877-95-VIERA (958-4372) ó visítenos en www.panasonic.com/contactinfo

●

Safety Precautions .................................2

●

Note .......................................................5

●

Accessories/Optional Accessory ............ 6

●

Basic Connection ...................................9

●

Identifying Controls .............................. 11

●

First Time Setup ................................... 12

●

How to Use Menu Functions ................15

●

FAQ ......................................................18

●

Limited Warranty

(for U.S.A. and Puerto Rico only) ......... 20

●

Customer Services Directory

(for U.S.A. and Puerto Rico) ................21

●

Limited Warranty (for Canada) .............22

Please read before using the unit

Contents

2

3

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.

8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided
plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.

11) Only use attachments / accessories specified by the
manufacturer.

12) Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart / apparatus combination
to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when
unused for long periods of time.

14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been
dropped.

15) To prevent electric shock, ensure the grounding pin on the
AC cord power plug is securely connected.

WARNING

Small parts can present choking hazard if accidentally
swallowed.
Keep small parts away from young children.
Discard unneeded small parts and other objects,
including packaging materials and plastic bags/sheets to
prevent them from being played with by young children,
creating the potential risk of suffocation.

Set up

This Plasma TV may fall and can cause personal injury or

even death if not installed correctly. To prevent personal
injury or death, follow these warnings:

Install the Plasma TV in accordance with the

manufacturer’s recommended pedestal or stand,
corresponding hardware and installation instructions.

This Plasma TV is for use only with the following

optional accessories. Use with any other type of
optional accessories may cause instability. The following
accessories are manufactured by Panasonic Corporation.

• Wall-hanging bracket (Angled)

TY-WK4P1RW

Be sure to ask a qualified technician to carry out the

installation and set-up.

Two or more people are required to install or remove the

television.

Some wall mounts (wall-hanging brackets) are not

designed to be mounted to walls with steel studs or old
cinder block constructions.

Ask your dealer or licensed contractor to properly secure

the wall-hanging bracket.

Do not route the TV’s power cord inside the wall.

The power cord was not designed for in-wall mounting.

Doing so can lead to fire hazard.

Do not place the Plasma TV or its stand on a sloped or

unstable surface.

The Plasma TV may fall or tip over.

Do not support the Plasma TV on a non-specified

pedestal.

Do not place the Plasma TV on furniture that can easily

be used as steps, such as a chest of drawers.
Do not climb or allow children to climb on the Plasma TV

Place or install the Plasma TV where it cannot be

pushed, pulled over or knocked down.

Route all cords and cables such that they cannot be

tripped over or pulled by curious children.

WARNING:

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set
(including on shelves above, etc.).

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

WARNING: To reduce the risk of electric shock, do not remove cover or back.
No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with
arrowhead within a triangle is
intended to tell the user that
parts inside the product are a risk
of electric shock to persons.

The exclamation point within
a triangle is intended to
tell the user that important
operating and servicing
instructions are in the papers
with the appliance.

Safety Precautions

Important Safety Instructions

WARNING/CAUTION

Do not place any objects on top of the Plasma TV.

If water spills onto the Plasma TV or foreign objects get

inside it, a short-circuit may occur which could result in
fire or electric shock. If any foreign objects get inside the
Plasma TV, please consult an Authorized Service Center.

In the unlikely event that you receive a shock from this

product it is possible that your household outlet may be
wired improperly. Have an electrician verify that the TV’s
outlet is properly wired. If the symptom persists, have the
TV serviced by a qualified authorized technician.

AC Power Supply Cord

To prevent fire or electric shock:

The Plasma TV is designed to operate on a 120 V AC,

60 Hz service. Insert the power cord plug as far as it
will go into the wall socket.

If the plug is not fully inserted, heat may generate, which

could cause a fire.

The included power cord is for use with this unit only.
Do not use any power cord other than that provided

with this TV.
Do not handle the power cord plug with wet hands.
Do not do anything that might damage the power

supply cord.
When disconnecting the power supply cord, hold the

plug, not the cord.
Do not use the power supply cord if the plug or cord is

damaged.

Replace the cord or contact your Authorized Service Center.

Do not use a 3-prong to 2-prong AC plug adaptors to

connect your TV’s plug to the wall outlet.

Doing so will defeat the TV plug’s safety feature, which

can lead to a shock hazard. If the wall outlet does not

accommodate a 3-prong plug, have a qualified electrician

replace your outlet and check the associated wiring.

Handling the power supply cord

Insert the power plug fully into the socket outlet. (If the

power plug is loose, it could generate heat and cause fire.)
Ensure that the power plug is easily accessible.
Ensure the earth pin on the power plug is securely

connected to prevent electrical shock.

• An apparatus with CLASS I construction shall be
connected to a power socket outlet with a protective
earthing connection.

Do not touch the power plug with a wet hand. (This

may cause electrical shock.)

Do not use any power cord other than that provided

with this TV. (This may cause fire or electrical shock.)

Do not damage the power cord. (A damaged cord may

cause fire or electrical shock.)

• Do not move the TV with the cord plugged in the socket
outlet.

• Do not place a heavy object on the cord or place the cord
near a high-temperature object.

• Do not twist the cord, bend it excessively, or stretch it.

• Do not pull on the cord. Hold onto the power plug body
when disconnecting cord.

• Do not use a damaged power plug or socket outlet.

If a problem occurs (such as no picture or no sound),

or if smoke or an abnormal odor is detected from the
Plasma TV, unplug the power supply cord immediately.

Continued use of the TV under these conditions might

cause a fire or permanent damage to the TV. Have the TV
evaluated by an Authorized Service Center. Servicing of the
TV by unauthorized personnel is strongly discouraged due
to its high voltage.

If water or an object gets inside the Plasma TV, if the

Plasma TV is dropped, or if the enclosure becomes
damaged, unplug the power supply cord immediately.

A short-circuit may occur, which could cause a fire. Contact

an Authorized Service Center for an evaluation.

CAUTION

Do not cover the ventilation holes.

Doing so may cause the Plasma TV to overheat, which can

cause a fire or damage to the Plasma TV.

Leave a space of 3 15/16” (10 cm) or more at the top,

left and right, and 2 3/4” (7 cm) or more at the rear.

When using the pedestal, keep the space between the

bottom of the TV and the pedestal or stand surface
clear from objects that may obstruct ventilation.

When Moving the Plasma TV

Be sure to disconnect all cables before moving the

Plasma TV.

Moving the TV with its cables attached might damage the

cables which, in turn, can cause fire or electric shock.

To prevent an electric shock, disconnect the power

plug from the wall outlet as a safety precaution before
carrying out any cleaning.

Transport only in upright position.

Transporting the unit with its display panel facing upward or

downward may cause damage to the internal circuitry.

Using a dry cloth, clean any dust from the power

supply cord and plug regularly.

Build-up of dust on the power cord plug can increase

humidity, which might damage the insulation and cause a
fire.

This Plasma TV radiates infrared rays;

therefore, it may affect other infrared communication

equipment. Install your infrared sensor in a place away from
direct or reflected light from your Plasma TV.

The TV will still consume some power as long as the
power supply cord is connected to the wall outlet.

Display panel is made of glass. Do not apply strong

force or impact to the display panel.

This may cause damage resulting in injury.

The TV is heavy. TV should be handled by 2 or more

people. Support as shown to avoid injury by the TV
tipping or falling.

4 5

CEA CHILD SAFETY NOTICES: Flat panel displays are not always supported on the proper stands or
installed according to the manufacturer’s recommendations. Flat panel displays that are inappropriately
situated on dressers, bookcases, shelves, desks, speakers, chests or carts may fall over and may cause
personal injury or even death.

The consumer electronics industry (of which Panasonic is a member) is committed to making home entertainment
enjoyable and safe. To prevent personal injury or death, be sure to follow the following safety guidelines:

TUNE INTO SAFETY:

• One size does NOT fit all. Follow the manufacturer’s recommendations for the safe installation and use
of your flat panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place flat panel displays on furniture that can easily be used as steps, such as a chest of drawers.

•

Remember that children can become excited while watching a program, especially on “larger than life” flat panel
displays. Care should be taken to install the display where it cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables connected to the flat panel display so that they
cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

• Use a mount that has been recommended by the display manufacturer and/or listed by an independent
laboratory (such as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your flat panel display, contact your retailer

about professional installation.

• Make sure the wall where you are mounting

the display is appropriate. Some wall mounts are not
designed to be mounted to walls with steel studs or old cinder block construction. If you are unsure,
contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.

Panasonic recommends that a qualified installer perform the wall-mount
installation. See page 4.

The American Academy of Pediatrics discourages television viewing for children younger than
two years of age.

This product incorporates the following software:

(1) software developed independently by or for Panasonic Corporation,
(2) software owned by a third party and licensed to Panasonic Corporation,
(3) software licensed under the GNU General Public License, Version 2 (GPL v2),
(4) software licensed under the GNU LESSER General Public License (LGPL) and/or,
(5) open source software other than software licensed under the GPL and/or LGP

For the software categorized as (3) or (4), please refer to the terms and conditions of GPL v2 and LGPL, as the
case may be. at http://www.gnu.org/licenses/old-licenses/gpl-2.0.html and
http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
In addition, software categorized as (3) or (4) is copyrighted by several individuals and/or entities. Please refer
to the copyright notice of those individuals at
http://www.am-linux.jp/dl/DTV10UT/.

GPL/LGPL SOFTWARE IS DISTRIBUTED IN THE HOPE THAT IT WILL BE USEFUL, BUT WITHOUT ANY
WARRANTY, EXPRESS, IMPLIED OR STATUTORY, INCLUDING THE IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
For at least three (3) years from delivery of products, Panasonic will give to anyone who contacts us at the
address provided below, for a charge of no more than our cost of physically performing source code
distribution, a complete machine-readable copy of the corresponding source code covered under GPL v2/LGPL.
Contact Information
[e-mail]
Source code is also freely available to you and any other member of the public via our website below.
http://www.am-linux.jp/dl/DTV10UT/

Safety Precautions (Continued)

Do not display a still picture for a long time

This causes the image to remain on the plasma screen
(“Image retention”). This is not considered a malfunction and is not covered by the warranty.

4 : 3

12

To prevent the “Image retention”, the screen saver is
automatically activated after a few minutes if no signals are
sent or no operations are performed.

Typical still images

•

Channel number and other logos

•

Image displayed in 4:3 mode

•

SD Card photo • Video game • Computer image

Set up

Do not place the unit where it’s exposed to sunlight or other bright light (including reflections).
Use of some types of fluorescent lighting may reduce the remote control’s transmission range.

Notes

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

FCC Caution:
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables
when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by
Panasonic Corp. of North America could void the user’s authority to operate this device.

FCC Declaration of Conformity

Model No. TC-50PS24

Responsible Party: Panasonic Corporation of North America

One Panasonic Way, Secaucus, NJ 07094

Contact Source: Panasonic Consumer Electronics Company

1-877-95-VIERA (958-4372)

email: [e-mail]

CANADIAN NOTICE:

For Model TC-50PS24
This Class B digital apparatus complies with Canadian ICES-003.

6

7

Accessories/Optional Accessory

Accessories

Remote Control
Transmitter

N2QAYB000485

Batteries for the
Remote Control
Transmitter (2)

AA Battery

AC cord

Pedestal

TBLX0135

Product Registration Card (U.S.A.)

Operating Instructions (Book)

VIERA Concierge and Quick start guide

Installing the remote’s batteries

Open

Hook

Note the correct polarity
(+ or -).

Close

Caution

Incorrect installation may cause

battery leakage and corrosion,
resulting in damage to the remote
control.

•

Do not mix old and new batteries.

•

Do not mix different battery types (such

as alkaline and manganese batteries).

•

Do not use rechargeable (Ni-Cd)

batteries.

Do not burn or break batteries.

Optional Accessory

Please contact your nearest Panasonic dealer to purchase the recommended
wall-hanging bracket. For additional details, please refer to the wall-hanging
bracket installation manual.

Wall-hanging bracket

(angle)

TY-WK4P1RW

a: 15.7” (400 mm)
b: 11.8” (300 mm)

Rear of the TV

Holes for wall-hanging
bracket installation

Screw for fixing the TV onto the wall-hanging bracket
(not supplied with the TV)

Depth of screw:
minimum 0.59” (15.0 mm),
maximum 1.18” (30.0 mm)

(View from the side)

a

b

Warning

In order to maintain the TV’s performance and safety, be absolutely sure to ask your dealer or a licenced

contractor to secure the wall-hanging brackets.

Carefully read the instructions accompanying optional accessories, and be absolutely sure to take steps to

prevent the TV from tipping over.
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.

Take care when fixing wall brackets to the wall. Always ensure that there are no electrical cables or pipes in the

wall before hanging bracket.

When using the angled-type wall hanging bracket, please ensure that there is sufficient space for the connecting

cables not to press against the wall when the TV is tilted forward.

For safety reasons, remove units no longer being used from their wall-mounted locations.

How to assemble (p. 7)

Accessories

Check you have all the items shown.

M8

Accessories

Assembly screws
(4 of each)

A

XYN5+F18FN
M5 × 18 (Silver)

B

THEL080N
M5 × 30 (Black)

Poles (2)

L

R

L

or R is printed at the

bottom of the poles.

Base (1)

Attaching the pedestal to TV

■

Assembling the pedestal

Fix securely with assembly screws A. (Total 4 screws)
Tighten screws firmly.

A

L

R

Pole

Front

Pole

Base

■

Set-up

Carry out work on a horizontal and level surface.
Tighten screws firmly.

B

Fix securely with assembly

screws B. (Total 4 screws)

Rear side

Arrow
mark

Pole

Hole for pedestal
installation

Pole

Base

Bottom view

Warning

Do not disassemble or modify the pedestal.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Caution

Do not use any other TV and displays.

Otherwise the TV may fall over and become damaged, and personal injury may result.

Do not use the pedestal if it becomes warped or physically damaged.

If you use the pedestal when it is physically damaged, personal injury may result. Contact your nearest Panasonic

Dealer immediately.

During set-up, make sure that all screws are securely tightened.

If sufficient care is not taken to ensure screws are properly tightened during assembly, the pedestal will not be strong

enough to support the TV, and it might fall over and become damaged, and personal injury may result.

Operating Instructions (CD-ROM)