Panasonic viera, Viera TH-L42ET5H, Viera TH-L47ET5H Operating Instructions Manual
snoitcurtsnI gnitarepO
LED TV
.tcudorp cinosanaP siht gnisahcrup rof uoy knahT
dna tcudorp siht gnitarepo erofeb ylluferac snoitcurtsni eseht daer esaelP
retain them for future reference.
.ylno sesoprup evitartsulli rof era launam siht ni nwohs segami ehT
hsilgnE
TQB4GC0832-1
CAS
ET5H series
2
TM
SDXC Logo is a trademark of
SD-3C, LLC.
DLNA®, the DLNA Logo and
DLNA CERTIFIED™ are
trademarks, service marks,
or certification marks of
the Digital Living Network
Alliance.
“AVCHD”, “AVCHD 3D” and
“AVCHD Progressive” are
trademarks of Panasonic
Corporation and Sony
Corporation.
Manufactured under license
from Dolby Laboratories.
Dolby and the double-D
symbol are trademarks of
Dolby Laboratories.
QuickTime and the
QuickTime logo are
trademarks or registered
trademarks of Apple
Inc., used under license
therefrom.
Manufactured under license under U.S. Patent Nos:
5,956,674; 5,974,380; 6,487,535 & other U.S. and
worldwide patents issued & pending. DTS, the Symbol,
& DTS and the Symbol together are registered
trademarks & DTS 2.0+Digital Out is a trademark of
DTS, Inc. Product includes software. © DTS, Inc. All
Rights Reserved.
RealMedia, RealVideo and
RealAudio are trademarks
or registered trademarks of
RealNetworks, Inc.
DivX®, DivX Certified®, DivX
Plus® HD and associated
logos are trademarks of
Rovi Corporation or its
subsidiaries and are used
under license.
“RealD 3D” is a trademark of RealD.
VIERA Link™ is a trademark
of Panasonic Corporation.
HDAVI Control™ is a
trademark of Panasonic
Corporation.
VIERA Connect is a
trademark of Panasonic
Corporation.
HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
VGA is a trademark of International Business Machines Corporation.
S-VGA is a registered trademark of the Video Electronics Standard Association.
See page 99 for more information.
Notice for Digital terrestrial broadcasting functions
●
Function related to Digital broadcasting will work in the areas where the digital terrestrial broadcasting services are
received. Consult your local Panasonic Dealer with coverage areas.
●
Not all the features are available depending on the country, area, broadcaster and service provider.
●
This TV has the capability for Digital broadcasting specifications. But future Digital broadcasting services cannot
be guaranteed.
3
Contents
Be Sure to Read
Safety Precautions ···············································4
Quick Start Guide
Accessories / Options ···········································6
Identifying Controls ···············································9
Basic Connection················································11
Auto Tuning ························································14
Enjoy your TV!
Basic
Using “VIERA Connect” ······································17
Watching TV ·······················································18
Using TV Guide (Digital TV) ·······························22
Watching External Inputs ····································24
Viewing 3D images ·············································26
How to Use VIERA TOOLS ································30
How to Use Menu Functions ······························31
Advanced
Tuning and Editing Channels ·····························38
Timer Programming ············································42
Child Lock ···························································45
Shipping Condition ·············································46
Updating the TV Software ··································47
Displaying PC Screen on TV ······························48
Advanced Picture Settings ·································49
USB HDD / SD Card Recording ·························50
Using Media Player ············································54
Using Network Services (DLNA / VIERA Connect)
····65
Link Functions (VIERA Link) ·······························75
External Equipment ············································82
Others
Technical Information··········································85
FAQs···································································94
Maintenance ·······················································96
Specifications ·····················································97
Licence ·······························································99
Transport only in upright position
Panasonic does not guarantee operation and performance
of peripheral devices made by other manufacturers; and we
disclaim any liability or damage arising from operation and/
or performance from usage of such other maker’s peripheral
devices.
The recording and playback of content on this or any
other device may require permission from the owner of the
copyright or other such rights in that content. Panasonic has
no authority to and does not grant you that permission and
explicitly disclaims any right, ability or intention to obtain
such permission on your behalf. It is your responsibility to
ensure that your use of this or any other device complies with
applicable copyright legislation in your country. Please refer
to that legislation for more information on the relevant laws
and regulations involved or contact the owner of the rights in
the content you wish to record or playback.
This product is licensed under the AVC patent portfolio
license for the personal and non-commercial use of a
consumer to (i) encode video in compliance with the AVC
Standard (“AVC Video”) and/or (ii) decode AVC Video that
was encoded by a consumer engaged in a personal and
non-commercial activity and/or was obtained from a video
provider licensed to provide AVC Video. No license is granted
or shall be implied for any other use.
Additional information may be obtained from MPEG LA, LLC.
See http://www.mpegla.com.
Safety Precautions
4
Safety Precautions
Warning
Handling the mains plug and lead
●
Insert the mains plug fully into the socket outlet. (If the mains plug is loose, it could generate heat and cause fire.)
●
Ensure that the mains plug is easily accessible.
●
Do not touch the mains plug with a wet hand. (This may cause electrical shock.)
●
Do not use any mains lead other than that provided with this TV. (This may cause fire or electrical shock.)
●
Do not damage the mains lead. (A damaged lead may cause fire or electrical shock.)
•
Do not move the TV with the lead plugged in the socket outlet.
•
Do not place a heavy object on the lead or place the lead near a high-temperature object.
•
Do not twist the lead, bend it excessively or stretch it.
•
Do not pull on the lead. Hold onto the mains plug body when disconnecting the lead.
•
Do not use a damaged mains plug or socket outlet.
If you find any
abnormality, remove the
mains plug immediately!
AC 220 V
50 / 60 Hz
Power source
●
This TV is designed to operate on:
•
AC 220 V, 50 / 60 Hz
•
Table-top use
Do not remove covers and NEVER
modify the TV yourself
●
Do not remove the rear cover as live parts are
accessible when it is removed. There are no user
serviceable parts inside. (High-voltage components
may cause serious electrical shock.)
●
Have the TV checked, adjusted, or repaired at your
local Panasonic dealer.
Do not expose to direct sunlight and
other sources of heat
●
Avoid exposing the TV to direct sunlight and other
sources of heat.
To prevent the spread
of fire, keep candles
or other open flames
away from this product
at all times
Do not expose to rain or excessive
moisture
●
To prevent damage which might result in electric shock
or fire, do not expose this TV to rain or excessive
moisture. This TV must not be exposed to dripping or
splashing water and objects filled with liquid, such as
vases, must not be placed on top of or above the TV.
Do not insert foreign objects into the TV
●
Do not allow any objects to drop into the TV through
the air vents. (Fire or electrical shock may result.)
Do not place the TV on sloped or
unstable surfaces, and ensure that the
TV does not hang over the edge of the
base
●
The TV may fall off or tip over.
Use only the dedicated pedestals /
mounting equipment
●
Using an unapproved pedestal or other fixtures may
make the TV unstable, risking injury. Be sure to ask
your local Panasonic dealer to perform setup.
●
Use approved pedestals (p. 7) / wall-hanging brackets
(p. 6).
Do not allow children to handle SD Card
or dangerous parts
●
As with any small object, the SD Card could be
swallowed by young children. Please remove SD
Card immediately after use and store out of reach of
children.
●
This product contains possibly dangerous parts that
can be breathed in or swallowed by young children
accidentally. Keep these parts out of reach of young
children.
T
t
W
p
●
R
s
p
●
D
v
●
R
●
●
●
●
B
●
●
●
●
●
●
●
Safety Precautions
5
Caution
This appliance is intended for use in
tropical climates
When cleaning the TV, remove the mains
plug
●
Cleaning an energised TV may cause electric shock.
Remove the mains plug from the wall
socket when the TV is not in use for a
prolonged period of time
●
This TV will still consume some power even in the Off
mode, as long as the mains plug is still connected.
Do not expose your ears to excessive
volume from the headphones
●
Irreversible damage can be caused.
Do not apply strong force or impact to the
display panel
●
This may cause damage resulting in injury.
Do not block the rear air vents
●
Adequate ventilation is essential to prevent failure of
electronic components.
●
Ventilation should not be impeded by covering the
ventilation openings with items such as newspapers,
table cloths and curtains.
●
We recommend that a gap of at least 10 cm is left all
around this TV even when placed inside a cabinet or
between shelves.
●
When using the pedestal, keep the space between the
bottom of the TV and the surface where the TV is set.
●
If pedestal is not used, ensure the vents in the bottom of
the TV are not blocked.
Minimum distance
10
10
10
10
(cm)
Built-in wireless LAN
Warning
Radio waves
●
Do not use the TV in any medical institutions or locations with medical equipment. Radio waves from the TV may
interfere with the medical equipment and cause accidents due to the malfunction.
●
Do not use the TV near any automatic control equipment such as automatic doors or fire alarms. Radio waves from
the TV may interfere with the automatic control equipment and cause accidents due to the malfunction.
●
Keep the distance at least 22 cm from the built-in wireless LAN part when you have a cardiac pacemaker. Radio
waves from the part may interfere with the operation of the pacemaker.
●
Do not disassemble or alter the built-in wireless LAN in any way
Caution
Built-in wireless LAN
●
To use the built-in wireless LAN, an access point needs to be obtained.
●
Do not use the built-in wireless LAN to connect to any wireless network (SSID∗) for which you do not have usage
rights. Such networks may be listed as a result of searches. However, using them may be regarded as illegal access.
∗SSID is a name for identifying a particular wireless network for transmission.
●
Do not subject the built-in wireless LAN to high temperatures, direct sunlight or moisture.
●
Data transmitted and received over radio waves may be intercepted and monitored.
●
The built-in wireless LAN uses 2.4 GHz and 5 GHz frequency bands. To avoid malfunctions or slow response caused
by radio wave interference, keep the TV away from the devices such as other wireless LAN devices, microwaves,
mobile phones and the devices that use 2.4 GHz and 5 GHz signals when using the built-in wireless LAN.
●
When noises occur due to the static electricity, etc., the TV might stop operating for the protection of the devices. In
this case, turn the TV off with Mains power On / Off switch, then turn it on again.
●
Additional information for built-in wireless LAN and access point may be on the following website. (English only)
http://panasonic.jp/support/global/cs/tv/
Accessories / Options
6
Accessories / Options
Standard accessories
Remote Control
●
N2QAYB000747
Batteries for the
Remote Control (2)
●
R6 (AA)
(p. 7)
Pedestal
(p. 7)
Clamper
(p. 13)
3D Eyewear (4)
(p. 26)
Mains lead
(p. 11)
Operating Instructions
Terminal adaptors
●
AV2 IN (COMPONENT /
VIDEO) adaptor
(p. 82, 83)
●
AV1 IN / AUDIO OUT
adaptor
(p. 82)
●
Accessories may not be placed all together. Take care not to throw them away unintentionally.
●
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by
young children accidentally. Keep these parts out of reach of young children.
Optional accessories
Please contact your local Panasonic dealer to purchase the recommended optional accessories. For additional details,
please read the manual of the optional accessories.
Wall-hanging bracket
Please contact your local Panasonic dealer to purchase the recommended wall-hanging bracket.
Rear of the TV
●
Holes for wall-hanging
bracket installation
Depth of screw:
minimum 10 mm
maximum 14 mm
Diametre: M6
(View from the side)
Screw for fixing the TV onto the wall-hanging bracket
(not supplied with the TV)
400 mm
400 mm
Warning
●
Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer.
Always be sure to ask a qualified technician to carry out set up. Incorrect fitting may cause equipment to fall, resulting
in injury and product damage. Any damage resulting from not having a professional installer mount your unit will void
your warranty.
●
When any optional accessories or wall hanging brackets are used, always ensure that the instructions provided are
followed fully.
●
Do not mount the unit directly below ceiling lights (such as spotlights or halogen lights) which typically give off high
heat. Doing so may warp or damage plastic cabinet parts.
●
Take care when fixing wall brackets to the wall. Wall mounted equipment shall not be grounded by metal within the
wall. Always ensure that there are no electrical cables or pipes in the wall before hanging bracket.
●
To prevent fall and injury, remove the TV from its fixed wall position when it is no longer in use.
3
●
C
●
1
2
D
●
D
●
D
●
D
●
E
●
T
●
W
p
●
Accessories / Options
7
3D Eyewear
●
TY-EP3D10WB
(2 eyewears included)
●
If you need 3D Eyewears additionally, please purchase this optional accessory.
●
Use Panasonic 3D Eyewear for passive 3D.
●
For more information (English only):
http://panasonic.net/avc/viera/3d/asia.html
Communication Camera
●
TY-CC20W
●
This camera can be used on VIERA Connect (p. 17, 74).
●
Depending on the area, this optional accessory may not be available.
For details, consult your local Panasonic dealer.
Installing / removing remote’s batteries
1
Pull Open
Hook
Caution
●
Incorrect installation may cause battery leakage and corrosion,
resulting in damage to the remote control.
●
Do not mix old and new batteries.
●
Replace only with same or equivalent type. Do not mix different
battery types (such as alkaline and manganese batteries).
●
Do not use rechargeable (Ni-Cd) batteries.
●
Do not burn or break up batteries.
●
Do not expose batteries to excessive heat such as sunshine, fire or
the like.
●
Make sure you dispose of batteries correctly.
●
Ensure batteries are replaced correctly, there is danger of explosion
and fire if battery is reversed.
●
Do not disassemble or modify the remote control.
2
Note the
correct polarity
(+ or -)
Close
Attaching / removing the pedestal
Warning
Do not disassemble or modify the pedestal.
●
Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any pedestal other than the one provided with this TV.
●
Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the pedestal if it becomes warped or physically damaged.
●
If you use the pedestal while it is physically damaged, personal injury may result. Contact your local Panasonic
dealer immediately.
During set-up, make sure that all screws are securely tightened.
●
If insufficient care is taken to ensure screws are properly tightened during assembly, the pedestal will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
●
If the TV is knocked or children climb onto the pedestal with the TV installed, the TV may fall over and personal injury
may result.
Two or more people are required to install and remove the TV.
●
If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the pedestal from the TV, do not remove the pedestal by the methods other than the specified
procedure.
(p. 8)
●
Otherwise the TV and / or pedestal may fall over and become damaged, and personal injury may result.
Accessories / Options
8
Assembly screw (4)
M5 × 16
Bracket
●
TBL5ZA32281
Base
●
TBL5ZX04161
(42” class)
●
TBL5ZX03881
(47” class)
Assembly screw (4)
M4 × 25
1
Assembling the pedestal
Use the assembly screws to fasten the bracket
to the base securely.
●
Make sure that the screws are securely tightened.
●
Forcing the assembly screws the wrong way will
strip the threads.
2
Securing the TV
Use the assembly screws to fasten securely.
●
Tighten the four assembly screws loosely at first, then
tighten them firmly to fix securely.
●
Carry out the work on a horizontal and level surface.
B
Arrow mark
Hole for pedestal installation
D
C
A
Front
Hold the bracket
not to fall over
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screw from the bracket.
Adjusting the panel to your desired angle
●
Do not place any objects within the full rotation range.
15°
15°
(View from the top)
Preventing the TV from falling over
Using the fall-prevent screw hole and a screw (commercially available), securely fix the body of the pedestal to the
installation surface.
●
The place where the pedestal is to be fixed should be thick enough and made of hard material.
Screw (not supplied)
Diametre: 3 mm
Length: 25 - 30 mm
Screw hole
I
Identifying Controls
9
Identifying Controls
Remote Control
1
Standby On / Off switch
●
Switches TV on or off standby.
2
Sound Selection
●
Changes the sound track in Digital TV
(if available)
●
Changes multiplex sound mode in Analogue TV
(if available)
(p. 86)
3
3D button (p. 28)
●
Switches the viewing mode between 2D and 3D.
4
[Main Menu] (p. 31)
●
Press to access Picture, Sound, Network, Timer
and Setup Menus.
5
Information (p. 19)
●
Displays channel and programme information.
6
VIERA TOOLS (p. 30)
●
Displays some special feature icons and accesses
easily.
7
INTERNET ([VIERA Connect]) (p. 17, 74)
●
Displays VIERA Connect home screen.
8
OK
●
Confirms selections and choices.
●
Press after selecting channel positions to quickly
change channel.
●
Displays the Channel List.
9
[Option Menu] (p. 20)
●
Easy optional setting for viewing, sound, etc.
10
Teletext
●
This button is not used for this model.
11
Subtitles (p. 19)
●
Displays subtitles.
12
Numeric buttons
●
Changes channel.
●
Sets characters.
●
When in Standby mode, switches TV on.
13
Sound Mute
●
Switches sound mute on or off.
14
Volume Up / Down
15
Input mode selection
●
TV - switches Digital TV / Analogue TV.
(p. 18)
●
AV - switches to AV input mode from Input
Selection list. (p. 24)
16
Aspect (p. 20)
●
Changes aspect ratio.
17
TV Guide (p. 22)
18
Exit
●
Returns to the normal viewing screen.
19
[Media Player] (p. 55)
●
Switches to SD Card and USB device viewing /
listening mode.
20
Cursor buttons
●
Makes selections and adjustments.
21
Return
●
Returns to the previous menu / page.
22
Coloured buttons
●
Used for the selection, navigation and operation of
various functions.
23
Hold
●
Freeze / unfreeze picture. (p. 20)
24
Index
●
This button is not used for this model.
25
Last view (p. 21)
●
Switches to previously viewed channel or input
mode.
26
Channel Up / Down
27
Operations for contents, connected equipment,
etc.
(p. 25, 53, 55, 71)
1
15
16
18
21
19
20
22
23
25
26
27
17
24
2
4
6
11
3
5
9
7
8
10
12
13
14
Identifying Controls
5 6 7
3
1
4
2
Rear side of the TV
10
Indicator / Control panel
Using the On Screen Displays - Operation guide
Many features available on this TV can be accessed via the On Screen Display menu.
■ Operation guide
Operation guide will help you to operate by using
the remote control.
Example: [Sound Menu]
1/2
0
0
0
0
11
Mode Music
Bass
Treble
Balance
Headphone Volume
Surround
Auto Gain Control
Volume Correction
Speaker Distance to Wall
Off
Off
Over 30cm
Main Menu
Picture
Sound
Network
Timer
Setup
Select
EXIT
Selects your favourite sound
mode.
Page up
Change
RETURN
Page down
Operation guide
S
elec
t
S
elects your favourite sound
mode
.
Page u
p
C
han
ge
RETURN
Page dow
n
■ How to use remote control
Open the main menu
Move the cursor / select from a range of options /
select the menu item (up and down only) / adjust
levels (left and right only)
Access the menu / store settings after adjustments
have been made or options have been set
Return to the previous menu
Exit the menu system and return to the normal
viewing screen
Auto power standby function
The TV will automatically go into Standby mode in the following conditions:
•
No signal is received and no operation is performed for 30 minutes in Analogue TV.
•
[Off Timer] is active in the Timer Menu. (p. 20)
•
No operation is performed for the period selected in [Auto Standby] (p. 35).
●
This function does not affect the recording of Timer Programming and One Touch Recording.
1
Function select
●
[Volume] / [Contrast] / [Brightness] / [Colour] /
[Sharpness] / [Tint] (NTSC signal) / [Bass]∗ /
[Treble]∗ / [Balance] / [Digital TV Auto Tuning] /
[Analogue TV Auto Tuning]
∗ [Music] or [Speech] mode in the Sound Menu
2
Channel Up / Down, Value change (when using the
F button), Switching the TV on
3
Changes the input mode
4
Mains power On / Off switch
●
Use to switch the mains power.
If you turned the TV off during Standby mode
by the remote control last time, the TV will be
in Standby mode when you turn the TV on with
Mains power On / Off switch.
●
When pressing the control panel button (1 - 4), the
control panel guide appears on the right side of the
screen for 3 seconds to highlight the pressed button.
5
Remote control signal receiver
●
Do not place any objects between the TV remote
control signal receiver and remote control.
6
C.A.T.S. (Contrast Automatic Tracking System)
sensor
●
Senses brightness to adjust picture quality when
[Eco Mode] in the Picture Menu is set to [On].
(p. 32)
7
Power and Timer LED
Red: Standby
Green: On
Orange: Timer Programming On
Orange (flash):
Recording of Timer Programming or One
Touch Recording in progress
Red with orange flash:
Standby with Timer Programming On or One
Touch Recording
●
The LED blinks when the TV receives a command
from the remote control.
Basic Connection
11
Basic Connection
External equipment and cables shown are not supplied with this TV.
Please ensure that the unit is disconnected from the mains socket before attaching or disconnecting any leads.
Terminals
6 7 8 9 10 5
2
4
3
1
1
SD Card slot (p. 50, 54)
2
USB 1 - 3 (p. 50, 54, 83)
3
HDMI1 - 4 (p. 12, 82)
4
Headphone jack (p. 83)
5
ETHERNET (p. 13, 66)
6
Antenna terminal (see below)
7
DIGITAL AUDIO OUT (p. 82)
8
PC (p. 83)
9
AV1 IN / AUDIO OUT (p. 82)
10
AV2 IN (p. 82, 83)
Connections
Mains lead and aerial
■ Digital TV, Analogue TV
AC 220 V
50 / 60 Hz
Mains lead
Aerial
RF cable
■ Mains lead
Insert the mains plug (supplied) firmly into place.
●
When disconnecting the mains lead, be absolutely sure to
disconnect the mains plug at the socket outlet first.
Basic Connection
12
T
e
●
●
●
■
T
■
●
●
●
Note
●
Keep RF (antenna) cable away from the mains lead to avoid and minimise mains interference pickup.
●
Do not place the RF cable under the TV.
●
To obtain optimum quality picture and sound, an aerial, the correct cable (75 Ω coaxial), and the correct terminating
plug are required.
●
If a communal aerial system is used, you may require the correct connection cable and plug between the wall aerial
socket and the TV.
●
Your local Television Service Centre or dealer may be able to assist you in obtaining the correct aerial system for your
particular area and the accessories required.
●
Any matters regarding aerial installation, upgrading of existing systems or accessories required, and the costs
incurred, are the responsibility of you, the Customer.
AV devices
■ Player / 3D compatible player
TV
Player /
3D-compatible player
HDMI cable
■ DVD Recorder / VCR
TV
DVD Recorder / VCR
RF cable
Aerial
RF cable
■ Set top box
TV
Set top box
HDMI cable
Satellite dish
Note
●
VIERA Link connection (p. 75, 76)
●
Please also read the manual of the equipment being connected.
●
Keep the TV away from electronic equipment (video equipment, etc.) or equipment with an infrared sensor.
Otherwise, distortion of image / sound may occur or operation of other equipment may be interfered.
●
When using a HDMI cable, use the fully wired one.
●
Check the type of terminals and cable plugs are correct when connecting.
Basic Connection
13
Network
To enable the network service functions (VIERA Connect, etc.), you need to connect the TV to a broadband network
environment.
●
If you do not have any broadband network services, please consult your retailer for assistance.
●
Prepare the internet environment for wired connection or wireless connection.
●
Setup of the network connection will start after the tuning (when first using the TV). (p. 15 - 16)
■ Wired connection
TV
Internet environment
LAN cable (Shielded)
●
Use the Shielded Twist Pair (STP) LAN cable.
■ Wireless connection
Internet environment
Access point
Built-in wireless LAN
Using clamper
■ Clamper (Standard accessory)
Attach the clamper Bundle the cables
hole
Insert the
clamper in a hole
hooks
Set the tip in
the hooks
To remove from the TV: To loosen:
Keep pushing
both side snaps
snaps
knob
Keep pushing
the knob
●
Do not bundle the RF cable and mains lead
together (could cause distorted image).
●
Fix cables with clampers as necessary.
●
When using the optional accessory, follow the
option’s assembly manual to fix cables.
r
Auto Tuning
14
Auto Tuning
Search and store TV channels automatically.
●
These steps are not necessary if the setup has been completed by your local dealer.
●
Please complete connections (p. 11 - 13) and settings (if necessary) of the connected equipment before starting Auto
Tuning. For details of settings for the connected equipment, read the manual of the equipment.
1
Plug the TV into mains socket and switch on
●
Takes a few seconds to be displayed.
●
If the red LED shows on the TV, press the Standby On / Off switch on the
remote control.
2
Select your language
中⽂
OSD Language
English
select
set
3
Select the mode to tune
TV Signal Selection
Digital TV
Analogue TV
Start Auto Tuning
select
tune / skip tuning
: tune (search for the available channels)
: skip tuning
4
Select [Start Auto Tuning]
TV Signal Selection
Digital TV
Analogue TV
Start Auto Tuning
select
access
■ When you select the analogue TV signal, select your area.
Analogue TV Channel Plan
Asia/W.Europe
NZ/Indonesia
China
CIS/E.Europe
CATV/Other
Hong Kong
select
access
●
When selecting [CATV/Other], press the
OK button, and then select the Channel
Plan from Indian CATV, South Africa,
American System, American CATV or
Japan CATV.
Auto Tuning starts
●
Auto Tuning will start to search for TV channels and store them.
The stored channels and sorted channel order vary depending on the area,
broadcasting system and conditions of signal reception.
CH1 120
CH C1 69
62
62
62
62
29
33
10
10
10
-
-
CBBC Channel
BBC Radio Wales
E4
Cartoon Nwk
10
Searching
Auto Tuning
Digital TV Scan
Analogue TV Scan
This will take about 10 minutes.
CH
Channel Name
Type
Digital TV
Digital TV
Digital TV
Digital TV
Analogue TV
Analogue TV
Quality
Digital TV: 4 Analogue TV: 2
Auto Tuning
15
5
Setup the network connection
Setup the network connection to enable the network service functions such as VIERA Connect, etc. (p. 17, 65).
●
Please note that this TV does not support wireless public access points.
●
Ensure the network connections (p. 13) and network environment are completed before starting setup.
Select the network type
Network Setup
Select Wired or Wireless
Wired Wireless Set later
[Wired] “Wired connection” (p. 13)
[Wireless] “Wireless connection” (p. 13)
select
access
●
To setup later on or skip this step
Select [Set later] or
■ [Wired]
1. Select [Auto]
Check network cable connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Connection Test
: succeeded
The test is successful
and the TV is
connected to the
network.
: failed
Check the settings and
connections. And then
select [Retry].
Acquire IP Address
Auto Manual
select
access
Automatically setup is done and the test of the
network connection starts.
●
To set manually, select [Manual] and set each item.
For details
(p. 68)
2. Go to the next step
(Press twice)
■ [Wireless]
Access points found automatically are listed.
1. Select your desired access point
1
2
3
Access Point A
Access Point B
Access Point C
11n(2.4GHz)
11n(5GHz)
11n(5GHz)
Available Wireless Networks
No. Network Name(SSID)
Status
Wireless type
select
access
●
For the information of the
highlighted access point
: Encrypted access point
●
To search access points again
●
To set [WPS(Push button)]
(p. 16)
●
To set manually (p. 70)
2. Access the encryption key input mode (English only)
Encryption Key Setting
Security type : WPA-PSK
Encryption type : TKIP
Please input the encryption key.
Encryption key
Connection will be made with the following settings: Network Name(SSID) : Access Point A
●
If the selected access point is not encrypted, the confirmation
screen will be displayed. It is recommended to select the
encrypted access point.
3. Enter the encryption key of the access point (English only)
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #
a b c d e f g h i j k l m n o p q r s t
u v w x y z ( ) + - . _ @ / “ ‘ % & ?
, ; = $ [ ] ~ < > { } | ` ^ \
*
Wireless Network Settings
Encryption key
Set characters
Store
select
set
●
You can set characters by using numeric buttons. (English only)
(p. 92)
Auto Tuning
16
5
4. After the access point setting is finished, perform the connection test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Connection Test
: succeeded
The test is successful and the TV is connected to
the network.
: failed
5. Go to the next step
Check the settings and connections. And then select
[Retry].
●
To set manually, select [Manual] and set each
item.
For details
(p. 70)
[WPS(Push button)]
1. Press the WPS button on the access point until the light flashes
2. Connect the TV with the access point
1) Please press the 'WPS' button on the wireless
access point until its light flashes.
2) When the light is flashing select ‘Connect’ on
TV.
If you are unsure, please check the instruction
manual of the wireless access point.
WPS(Push button)
Connect
●
Ensure that your access point supports WPS for this setup.
●
WPS: Wi-Fi Protected Setup™
●
If the connection has failed, check the settings and positions of
your access point. And then, follow the on-screen instructions.
3. After the access point setting is finished, perform the connection test
Check wireless network connection.
Check acquired IP address.
Check for devices using same IP address.
Check gateway connection.
Check server connection.
Connection Test
: succeeded
The test is successful and the TV is connected to
the network.
: failed
Check the settings and connections. And then select
[Retry].
4. Go to the next step
(Press twice)
6
Select [Home]
Select [Home] viewing environment to use in your home environment.
Please select your viewing environment.
Home Shop
select
set
■ [Shop] viewing environment (for shop display only)
[Shop] viewing environment is the demonstration mode to explain main features of this TV.
Select [Home] viewing environment to use in your home environment.
●
You can return to viewing environment selection screen at the stage of Shop confirmation screen.
1 Return to viewing environment
selection screen
2 Select [Home]
Please select your viewing environment.
Home Shop
select
set
Shop
You have selected shop mode
To change viewing environment later on, you will need to initialise all settings by accessing Shipping
Condition. [Shipping Condition] (p. 46)
Auto Tuning is now complete and your TV is ready for viewing
If tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.
Note
●
To check the channel list “Using TV Guide (Digital TV)” (p. 22)
●
To edit or hide (skip) channels “Tuning and Editing Channels” (p. 38 - 41)
●
To retune all channels [Auto Tuning] in “Tuning and Editing Channels” (p. 40, 41)
●
To add the available TV mode later [Add TV Signal] (p. 36)
●
To initialise all settings [Shipping Condition] (p. 46)
Using “VIERA Connect”
17
Using “VIERA Connect”
VIERA Connect is a gateway to the internet services unique to Panasonic.
VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy internet contents
such as videos, games, communication tools, etc. from VIERA Connect home screen.
●
Some features of the websites may not be available.
1
Turn power on
●
Mains power On / Off switch should be on. (p. 10)
●
Every time you turn on the TV, VIERA Connect introduction banner appears. The
banner is subject to change.
Enjoy selected internet content with VIERA Connect.
Simply press the OK / INTERNET button
2
Access VIERA Connect
While the banner is displayed
or
●
Depending on the usage conditions, it may take a while to read all the data.
●
Messages might be displayed before VIERA Connect home screen.
Please read these instructions carefully and follow the on-screen instructions.
Example: VIERA Connect home screen
MORE
BACK
●
To go to the next level, select
[MORE].
●
To back to the previous level, select
[BACK].
●
To return to VIERA Connect home
screen
■
To exit from
VIERA Connect
●
To set the VIERA
Connect introduction
banner display off
[VIERA Connect
Banner] (p. 36)
●
Video communication requires an exclusive Communication Camera TY-CC20W.
“Optional accessories” (p. 6)
For details, read the manual of the Communication Camera.
●
You can connect a keyboard and a gamepad via USB port for character input and playing games in VIERA Connect.
You can also operate the TV with a keyboard or a gamepad other than VIERA Connect features.
For more information
“USB connection” (p. 92)
Note
●
If you cannot access VIERA Connect, check the network connections (p. 13) and settings (p. 15 - 16).
●
For more information of VIERA Connect (p. 74)
Watching TV
18
O
D
F
●
●
●
D
●
Watching TV
1
Turn power on
●
Mains power On / Off switch should be on. (p. 10)
■ VIERA Connect introduction banner appears
Every time you turn on the TV, this banner appears at the bottom of the
screen.
You can access to VIERA Connect easily and enjoy the various
contents.
(p. 17)
●
To remove this banner, leave for about 5 seconds or press any
buttons (except the buttons to access VIERA Connect).
●
To set this banner display off [VIERA Connect Banner] (p. 36)
●
The banner is subject to change.
2
Select Digital TV or Analogue TV
Information banner appears whenever you select
a channel
(p. 19)
Digital TV
The selected mode is displayed.
1
BBC ONE WALES
Coronation Street
20:35
20:30 - 20:55
Now
All Digital Channels
●
You can also select the mode pressing the TV
button repeatedly on the TV (p. 10).
3
Select a channel
up
down
or
●
To select a more than two-digit channel
position number, e.g. 399
■ To select from the Channel List
6 Cartoon Nwk
7 BBC Radio Wales
8 BBC Radio Cymru
1 BBC ONE Wales
2 BBC THREE
3 BBCi
4 CBBC Channel
All Digital Channels
select channel
watch
■ To select a channel using Information banner (p. 19)
1 Display Information banner if it is not displayed 2 While the banner is displayed, select the channel
select channel
watch
■ To select a channel using TV Guide (p. 22)
1 Display TV
Guide
2 Select the current
programme or channel
select
access
3 Select [View] (Digital TV)
Emerald
11: 00 - 11:30
View
Timer Programming
select
watch
Watching TV
19
Other useful functions
Display Information banner
Display Information banner
●
Also appears when changing a channel.
1
BBC ONE WALES
Coronation Street
20:30 - 20:55
20:35
Now
All Digital Channels
Example: Digital TV
1
2
3 4 5
6
1
Channel position and name
2
Channel type ([Radio], [Data], etc.) /
Encrypted channel ( ) /
TV mode ( , )
3
Programme
4
Current time
5
Programme Start / Finish time (Digital TV)
Channel number, etc. (Analogue TV)
6
Category
Features available / Message meanings
Sound mute on
[Bad signal]
Poor TV signal quality
[Dolby D+], [Dolby D], [HE-AAC]
Dolby Digital Plus, Dolby Digital or
HE-AAC audio track
Subtitle service available
Multiple image or audio available
, ,
II
,
Audio mode (p. 86)
1 - 90
Off Timer remaining time
●
For settings (p. 20)
●
To confirm another tuned channel
name
●
To watch the channel listed in the
banner
●
Information on the next programme
(Digital TV)
●
To hide
●
Extra information (Digital TV)
(Press again to hide the banner)
●
To set display timeout
[Banner Display Timeout] (p. 36)
●
To select a favourite list (Digital TV)
if the favourite list is created in [Favourites Edit]
(p. 38)
Display subtitles
Display / hide subtitles (if available)
●
To change the language (if available) (press repeatedly)
●
To set the default language [Preferred Subtitles] (p. 36)
Note
●
Subtitles may not be displayed properly in 3D images.
Watching TV
20
S
●
●
Y
1
4
Hold
Freeze / unfreeze picture
Display the selectable settings for the current status
Confirm or change the current status instantly
●
To change
select
access
select / change
store
[Multi Video] (Digital TV)
Allows you to select the image (if available)
[Multi Audio] (Digital TV)
Selects between alternative language for sound tracks
(if available)
[Dual Audio] (Digital TV)
Selects stereo / monaural (if available)
[Subtitle Language] (Digital TV)
Allows you to select the language in which subtitles
should appear (if available)
[Channel Colour Set] (Analogue TV)
Sets colour density
(p. 32)
[MPX] (Analogue TV)
Selects multiplex sound mode (if available)
(p. 34)
[Volume Correction]
Adjusts volume of individual channel or input mode
[Safely remove USB]
Takes this operation to remove the connected USB
device safely from the TV
Off Timer
Turn the TV to Standby mode automatically after a fixed period
1 Display the menu
2 Select [Timer]
Timer
select
access
3 Select [Off Timer] and set the time in 15-minute increments
15
30
45
60
75
90
Off
minutes
Timer Programming
Off Timer
Auto Standby
minutes
minutes
minutes
minutes
minutes
select [Off Timer]
access
select the time
store
●
To cancel, set to [Off] or turn the TV off.
●
To confirm the remaining time “Display Information banner” (p. 19)
●
When the remaining time is within 3 minutes, the remaining time will flash on
the screen.
Aspect
Change the aspect ratio (image size)
Enjoy viewing the image at its optimum size and aspect.
(Press repeatedly until you reach the desired mode.)
■ To change the aspect ratio manually (if available)
1 Display Aspect Selection list 2 While the list is displayed, select the mode
Aspect Selection
16:9
14:9
Just
4:3
4:3 Full
Zoom1
Zoom2
Zoom3
Select
EXIT
RETURN
Change
Aspect Selection list
select
store
●
You can also change the mode only
using the ASPECT button.
Watching TV
21
[16:9] [4:3 Full]
Directly displays the image at 16:9
without distortion (anamorphic).
Displays a 4:3 image enlarged
horizontally to fit the screen.
●
For Digital TV or HD signal
[14:9] [Zoom1]
Displays the image at the standard
14:9 without distortion.
Displays a 16:9 letterbox or 4:3 image
without distortion.
[Just] [Zoom2]
Displays a 4:3 image full-screen.
Stretching is only noticeable at the left
and right edges.
Displays a 16:9 letterbox (anamorphic)
image full-screen without distortion.
[4:3] [Zoom3]
Displays the image at the standard 4:3
without distortion.
Displays a 2.35:1 letterbox
(anamorphic) image full-screen without
distortion.
At 16:9, displays the image at its
maximum (with slight enlargement).
Note
●
For HD signal in Digital TV, only [16:9] and [4:3 Full] are available.
●
For SD signal in Digital TV, only [16:9], [4:3], and [4:3 Full] are available.
●
Only [16:9] and [4:3] are available in PC input mode.
●
Aspect cannot be changed in 3D mode.
●
Aspect mode can be memorised separately for SD (Standard definition) and HD (High definition) signals except in
Digital TV.
Last view
Switch to previously viewed channel or input mode easily
●
Press again to return to the current view.
Note
●
Switching channel is not available while the recording of Timer Programming or One Touch Recording is in progress.
●
Watching less than 10 seconds is not regarded as the previously viewed channel or input mode.
Change OSD language
You can change language for on-screen displays.
1 Display the
menu
2 Select [Setup]
Setup
select
access
3 Select [Language]
Language Access
select
access
4 Select [OSD Language]
OSD Language Access
Language
select
access
5 Select the language and set
中⽂
OSD Language
English
select
set
Using TV Guide (Digital TV)
22
■
A
F
F
F
F
O
1
T
U
m
1
●
■
■
A
S
p
●
●
●
●
Using TV Guide (Digital TV)
TV Guide - Electronic Programme Guide (EPG) provides an on-screen listing of the programmes currently broadcast
and the forthcoming broadcasts over the next seven days (depending on the broadcasters).
●
When this TV is turned on for the first time, or the TV is switched off for more than a week, it may take some time
before TV Guide is completely shown.
1
If in Analogue TV
Select Digital TV
(p. 18)
2
View TV Guide
●
Press again to change the layout ([Landscape] / [Portrait]).
View [Landscape] to see several channels.
View [Portrait] to see one channel by time.
Example: [Portrait]
11:00 - 12:30
12:30 - 14:00
14:00 - 14:30
14:30 - 15:00
15:00 - 15:30
15:30 - 16:00
16:00 - 16:30
16:30 - 16:45
In Memory of Lydia Shum (R) (S)
W E Your Jun Mao Xia
Jin Mao Xiang (R) (C/M) (S)
Women Plaza ll
Wealth Blog
Life Journey (R) (C/M)
Smart Class
News
Home11 World16 Jade81 Pearl84 Sapphire100
2011/10/26 Wed 10:27
26th Wed
All Digital Channels
TV Guide: Portrait
In Memory of Lydia Shum (R) (S)
11:00 11:30 12:00 12:30 13:00
上海商
W E Your Jun Mao Xia
In
Station Close
ETV China Financial Information S
Market Update Market Update
阿笨與阿占（
Market Update Market Update
Business NewsMarket News
Drama 2Drama 1
午間新
CCTV9 – Live
Live
Topics NewsShopping
11:00 - 12:30 In Memory of Lydia Shum (R) (S)
11 Home
World
Jade
Pearl
Sapphire
Ruby
Gold
Home
16
81
84
100
101
102
11
京都念慈菴 ⾼清劇場 : 新不了
2011/10/26 Wed 10:27
26th Wed
All Digital Channels
TV Guide: Landscape
Time:
Example: [Landscape]
3
1
2
4
5
1
Current date and time
2
TV Guide date
3
TV Guide time
4
Programme
5
Channel position and
name
■
To return to TV
■ To watch the programme
1 Select the current programme
or channel
2 Select [View]
select
access
Emerald
11: 00 - 11:30
View
Timer Programming
select
watch
●
To use Timer Programming (p. 23)
■ To the previous day
■ To the next day
Using TV Guide (Digital TV)
23
■ To view a channel list of the selected category
(Category list)
Favourites
All Digital Channels
All Digital Channels
Favourites1
Favourites2
Favourites3
Favourites4
●
To list favourite channels
(p. 38)
select category
view
Other useful functions
View details of the programme
1 Select the programme 2 View details
●
Press again to return to TV Guide.
Timer Programming
The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the
USB HDD or the SD Card. At the correct time, the TV will tune to the correct channel even if the TV is in Standby
mode.
1 Select the forthcoming programme 2 Select the function ([USB HDD Rec.], [SD Card Rec.] or [Reminder])
select
set
--- --/-- --:--
20:002011/10/26
D 12 ABC ONE
--:--
20:30
---
--- --/-- --:-- --:-----
--- --/-- --:-- --:-----
--- --/-- --:-- --:-----
10:462011/10/26
Timer Programming
Function No. Channel Name Date Start End
Wed
USB HDD Rec.
Wed
(30 min.)
(--- min.)
(--- min.)
(--- min.)
(--- min.)
<TIMER>
(Timer Programming screen)
select
store
●
LED will turn to orange if
Timer Programming is set.
(Orange LED will flash if the recording
of Timer Programming is in progress.)
“Indicator / Control panel” (p. 10)
[USB HDD Rec.] / [SD Card Rec.] / [Reminder]
“Set timer programming event details” (p. 43)
■ To check / change / cancel a timer
programming event
■ To return to TV Guide
“Timer Programming” (p. 42 - 44)
■ If you select the current programme
A confirmation screen asking whether you want to watch or record the programme appears.
Select [Timer Programming] and set [USB HDD Rec.] or [SD Card Rec.] to record from the time you finish the timer
programming event setting.
Emerald
11: 00 - 11:30
View
Timer Programming
select
access
Note
●
This function is not available in Analogue TV.
●
Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or
service provider.
●
No other channel can be selected while the recording of Timer Programming is in progress.
●
When recording programmes to the USB HDD, be sure to format the USB HDD and enable it to record in [Recording
Setup]. When recording programmes to the SD Card, prepare the appropriate SD Card. For more information of the
USB HDD / SD Card Recording
(p. 50, 90)
Watching External Inputs
24
Watching External Inputs
Connect the external equipment (VCRs, DVD equipment, etc.) and you can watch through the input.
●
To connect the equipment (p. 11 - 13, 82 - 84)
The remote control is capable of operating the contents or external equipment.
(p. 25)
1
Turn the TV on
If input mode is not switched automatically
Perform and
●
Check the setup of the equipment.
2
Display the input selection menu
3
Select the input mode connected to the equipment
Input Selection
AV 2
AV 1
PC
SD Card/USB
TV
HDMI4
HDMI3
HDMI2
HDMI1
select
watch
●
You can also select the input using the AV button on the remote control or the TV
(except [SD Card/USB]).
Press the button repeatedly until the desired input is selected.
●
To switch between [COMPONENT] and [VIDEO] in [AV2], move the indicator by
pressing left and right cursor button.
●
[SD Card/USB]: Switches to Media Player. “Using Media Player” (p. 54)
●
You can label or skip each input mode (except [SD Card/USB]).
“Input Labels” (p. 36)
Skipped inputs will not be displayed when the AV button is pressed.
4
View
Displays the selected mode
AV1
Note
●
If the external equipment has an aspect adjustment function, set it to “16:9”.
●
For details, read the manual of the equipment or ask your local dealer.
■
To return to TV
Y
H
E
C
P
E
s
●
●
●
Watching External Inputs
25
Operating contents or the equipment with the TV remote control
You can operate the contents in Media Player / media servers, recording functions or the connected equipment.
Standby
Set to Standby mode / Turn on
Play
Playback videocassette / DVD
Stop
Stop the operations
Rewind / Skip / Search
VCR: Rewind, view the picture rapidly in reverse
DVD / video content: Skip to the previous track, title or chapter
Press and hold to search backward
Fast-forward / Skip / Search
VCR: Fast-forward, view the picture rapidly forward
DVD / video content: Skip to the next track, title or chapter
Press and hold to search forward
Pause
Pause / Resume
DVD: Press and hold to play at slow speed
Programme Up / Down
Select programme
Record
Start recording
How to change the code
Each type of the Panasonic equipment has its own remote control code.
Change the code according to the equipment you want to operate.
Press and hold during the following operations
Enter the appropriate code,
see table below
Press
Type of the equipment, features Code
DVD Recorder, DVD Player, Blu-ray Disc Player 70 (default)
Player theatre, Blu-ray Disc theatre 71
VCR 72
Using USB HDD / SD Card Recording
(p. 53)
Using in Video mode of Media Player
(p. 55)
Using in Video mode of DLNA
(p. 71)
The equipment using in VIERA Link
(p. 80)
73
Note
●
Confirm if the remote control works correctly after changing the code.
●
The codes may be reset to default values if batteries are replaced.
●
Some operations may not be possible on some equipment models.
Viewing 3D images
26
Viewing 3D images
You can enjoy viewing 3D images with contents or programmes corresponding to the 3D effect by wearing the 3D
Eyewear
“Standard accessories” (p. 6)
This TV supports [Frame Sequential]
∗
1
, [Side by Side]
∗
2
and [Top and Bottom]
∗
3
3D formats.
∗
1: The 3D format that the images for the left and right eyes are recorded with the high definition quality and alternately
played back.
∗
2, ∗3: Other available 3D formats
●
How to view the 3D images (p. 27)
Warning
●
Do not disassemble or modify the 3D Eyewear. Doing so may result in injury, or may cause the user to feel unwell.
Caution
To use 3D Eyewear safely and comfortably, please read these instructions fully.
3D Eyewear
●
Do not drop, exert pressure on, or step on the 3D Eyewear. Doing so may damage the glass section, which may
result in injury.
●
Be careful of the tips of the frame and the hinge section when putting on the 3D Eyewear. Failure to heed this
warning may result in injury. Pay special attention when children are using this product.
Viewing 3D Content
●
Do not use the 3D Eyewear if you have a history of over-sensitivity to light, heart problems, or have any other existing
medical condition. Using the 3D Eyewear may cause the symptoms to worsen.
●
Stop using the 3D Eyewear immediately if you feel tired, discomfort, or any other abnormality. Continuing to use
the 3D Eyewear in such cases may cause you to feel unwell. Please take the necessary rest before continuing use.
When you set the effect by using [3D Adjustment], take into account that the vision of 3D images varies among
different individuals.
●
When using the 3D Eyewear, be careful not to strike the TV screen or other people by mistake. As the images are
in 3D, the distance between the user and screen may be mistaken, causing the user to strike the screen which may
result in injury.
●
When using the 3D Eyewear, make sure your eyes are on an approximately horizontal level, and keep a position
where you do not see double images.
●
If you suffer from myopia (short-sightedness), hyperopia (far-sightedness), astigmatism, or have eyesight differences
between the left and right eyes, please use corrective glasses or other such methods to correct your eyesight before
putting on the 3D Eyewear.
●
Stop using the 3D Eyewear if you can clearly see double images when viewing 3D content. Prolonged use may
cause eyesight fatigue.
●
View the screen at a distance at least 3 times further than the effective height of the screen.
Recommended distance:
For a 42-inch television, 1.6 m or more.
For a 47-inch television, 1.8 m or more.
Using the 3D Eyewear at a distance closer than the recommended distance may cause eyesight fatigue.
3D Eyewear Use
●
Do not use the 3D Eyewear for any other purpose except viewing 3D images.
●
As a guide, 3D Eyewear should not be used by children younger than 5 - 6 years old. As it is difficult to judge younger
children’s reactions to fatigue or discomfort, it may be difficult to prevent them from suddenly feeling unwell. When
this product is being used by a child, the parent or guardian should check to ensure that the child’s eyes are not
becoming tired.
●
Do not use if the 3D Eyewear is cracked or broken. Doing so may result in injury or eyesight fatigue.
●
Stop using the 3D Eyewear immediately if your skin feels unusual. In rare cases, the paint or materials used in the 3D
Eyewear may cause an allergic reaction.
Note
●
3D Eyewear can be worn over vision correction glasses.
●
●
●
●
●
Y
(
■
●
●
●
■
●
■
●
■
●
●
●
●
●
●
Viewing 3D images
27
r
Storing and cleaning the 3D Eyewear
●
Clean using a soft, dry cloth.
●
Wiping the 3D Eyewear with a soft cloth that is covered in dust or dirt may scratch the eyewear. Shake off any dust
from the cloth before use.
●
Do not use benzene, thinner, or wax on the 3D Eyewear, as doing so may cause the paint to peel off.
●
Do not dunk the 3D Eyewear in liquid such as water when cleaning.
●
Avoid storing the 3D Eyewear in hot or highly humid locations.
To view the 3D images
You can enjoy the 3D images in a variety of ways.
(Frame Sequential, Side by Side and Top and Bottom are the supported 3D format.)
■ Playing back 3D-compatible Blu-ray disc (Frame Sequential format)
●
Connect the 3D-compatible player via a fully wired HDMI compliant cable.
●
If input mode is not switched automatically, select the input mode connected to the player. (p. 24)
●
If you use the non 3D-compatible player, the images will be displayed on 2D mode.
■ 3D-supported broadcast
●
Please consult the suppliers of contents or programmes for availability of this service.
■ 3D photos and 3D videos taken by 3D-compatible Panasonic products
●
Available in Media Player (p. 56 - 58, 60) and Network services (p. 71, 72)
■ 2D images converted to 3D
●
Set to [2D 3D] mode in [3D Mode Selection]. (p. 28)
1
Put on the 3D Eyewear
2
View the 3D images
●
Safety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view
3D images.
If you select [Yes], this message will be displayed again in the same condition after Mains power On / Off
switch is next turned on. Select [No] if you do not want to display this message again.
Note
●
The 3D image or 3D effect may not be available in the following conditions:
•
VIERA Connect home screen (p. 17) is displayed.
●
3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.
●
Do not wear the 3D Eyewear when watching anything other than 3D images. Liquid crystal displays (such as
computer screens, digital clocks or calculators, etc.) may be difficult to see while wearing the 3D Eyewear.
●
Do not use the 3D Eyewear as sunglasses.
●
3D effects may be perceived differently depending on the person.
Viewing 3D images
28
Changing 2D - 3D mode
You can easily change the viewing mode between 2D and 3D using the 3D button.
●
This function is not available in PC mode.
Select the mode
2D3D3D
2D
3D Mode Selection
select
set
●
Items of [3D Mode Selection] vary
depending on the condition.
[3D] / [2D] / [2D
3D]:
Displays the appropriate image that you desire without selecting 3D format.
●
This mode may not work properly depending on the source image format. In this case, select the appropriate 3D
format manually.
■ To change 3D format manually
When the image is not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting.
During the above operation Select the mode
2D 3D
3D Mode Selection (Manual)
Top and Bottom - 2D
Top and Bottom - 3D
Side by Side - 2D
Side by Side - 3D
Frame Sequential - 2D
Frame Sequential - 3D
Original
select
set
[Original]:
Displays the source image as it is.
●
Use to identify the format type of the source image.
“Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format”
(see below)
[Frame Sequential - 3D] / [Frame Sequential - 2D] / [Side by Side - 3D] / [Side by Side - 2D] /
[Top and Bottom - 3D] / [Top and Bottom - 2D]:
Displays the mode you select.
●
Not valid on Analogue TV and AV mode
[2D 3D]:
Converts 2D images into 3D.
●
Please note the 3D images appear slightly different from the originals.
●
Using this function for profit-making purposes, or publically showing images converted from 2D to 3D in places
such as shops or hotels etc. may infringe on the rights of the copyright holder protected under copyright law.
Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format
If the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.
[3D Mode Selection]
Source
image format
[Original]
[Frame
Sequential - 3D]
[Side by Side
- 3D]
[Top and
Bottom - 3D]
[2D
3D]
Frame Sequential
Normal 3D
∗
1
Side by Side (Full)
Normal 3D
∗
1
Side by Side
Normal 3D
∗
1
Top and Bottom
Normal 3D
∗
1
Normal format (2D)
Normal 3D
∗
1: When selecting [Frame Sequential - 2D], [Side by Side - 2D] or [Top and Bottom - 2D], the images will be displayed
without 3D effect.
●
Depending on the player or broadcasts, the image may be different from the above illustrations.
I
f
■
●
Viewing 3D images
29
3D Settings
If the 3D images are not displayed correctly or seem unusual, adjust and setup the 3D settings.
1
Display the menu
2
Select [Picture]
Picture
select
access
3
Select [3D Settings]
2/2
P-NR Off
Access
On
3D Settings
Screen Display
Advanced Settings
Reset to Defaults
select
access
4
Select one of the following functions and set
3D Adjustment
Off
On
On
Access
Edge Smoother
3D Detection
3D Signal Message
Safety Precautions
3D Settings
Access
2D 3D Depth
Mid
select
adjust
access / store
■
To return to TV
Item Adjustments / Configurations (alternatives)
2D 3D Depth
Selects a level of 3D-image depth for viewing converted 2D images [Min] / [Mid] / [Max]
3D Adjustment
Adjustment of the 3D effect (except in [2D
3D] mode) [Off] / [On]
●
Set to [On] to enable [Effect] setting.
●
When setting to [On], a safety precaution message will appear. Read it carefully and press the
RETURN button to go to [Effect] setting.
[Effect]: Adjusts the 3D depth according to the contents or to your preference.
Edge Smoother
Set to [On] if you feel the contoured parts of an image are not smooth enough (except in
[2D
3D] mode) [Off] / [On]
3D Detection
Automatically detects the 3D format signals [Off] / [On] / [On (Advance)]
[On (Advance)]: Detects all the 3D format signals and displays the 3D image automatically.
[On]: Detects the particular 3D format signals (Frame Sequential, etc.) and displays the 3D
image automatically.
●
To view 3D images without any notifications and operations, set to [On (Advance)].
3D Signal
Message
Selects whether to give a notification message when a signal of 3D format is found [Off] / [On]
●
For Digital TV, Component and HDMI input
●
This function is not available when [3D Detection] is set to [On (Advance)].
Safety
Precautions
Displays the precautions for viewing 3D images
Note
●
[3D Adjustment] will not be memorised when changing the input mode or channel.
How to Use VIERA TOOLS
30
How to Use VIERA TOOLS
You can access some special features easily by using the VIERA TOOLS function.
1
Display icons of the feature
2
Select a feature
VIERA Link
select
access
■
To return to TV
or
■ Follow the operations of each feature
[VIERA Link]
(p. 78 - 81)
[Photo]
∗
(p. 56)
[Video]
∗
(p. 60)
[Recorded TV]
∗
(p. 61)
[Music]
∗
(p. 64)
[VIERA Connect]
(p. 17, 74)
[Media Server]
∗
(p. 71)
∗
When two or more available devices are connected, a selection screen will be displayed.
Please select the correct description and access.
Note
●
If the selected feature is not available, the demonstration to explain how to use it can be displayed. Press the OK
button to view the demonstration after selecting the unavailable feature.
H
V
■
■
■
■
Y
●
■
●
●
Loading...